New On-Line MFL Testing Method and Apparatus for Winding Mine Hoist Wire Rope
Source abstract
Abstract
Based on the introduction and analysis of difficulties encountered during technical inspection of the wire rope of a winding mine hoist (WMH) working at high speed, an open-loop permanent magnet magnetizer was used to simulate and analyze the effect of the structural dimensions of this magnetizer on the magnetic leakage field of a defect, and the results of the simulation analysis were initially verified by experiments. Additionally, in order to keep the axial position of the probe in line with the axial position of the wire rope, a rocker arm was proposed to act in coordination with a motor to drive the clutching open and closed probe, thereby creating an on-line nondestructive testing device to float and track the movement of the wire rope in different directions. Finally, the device was applied to testing of WMH wire rope on site to validate the effectiveness and feasibility of the method.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Non-Destructive Testing Techniques · Welding Techniques and Residual Stresses · Power Line Inspection Robots
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical Science & Engineering, Huazhong University of Science and Technology, Wuhan 430074, China
School of Transportation and Logistics Engineering, Wuhan University of Technology, Wuhan 430063, China
Three Gorges Navigation Authority, Yichang 443002, China
Funding
CHANGJIANG RIVER ADMINISTRATION of NAVIGATIONAL AFFAIRS, MOT
References (30)
Show source-provided references
1. Failure of crane wire rope10.1016/S1350-6307(00)00047-9 ↗
2. Rope NDT as means to raise safety of crane and elevator use
3. Wire ropes: Computational, mechanical, and metallurgical properties under tension loading10.1016/j.commatsci.2011.12.034 ↗
4. Failure analysis of a mine hoist rope10.1016/S1350-6307(96)00029-5 ↗
5. Failure mechanisms in wire ropes10.1016/1350-6307(95)00004-A ↗
6. Cao, Y., Zhang, D., Wang, C., Gu, Y., and Xu, D. (2006, January 14–17). A Novel Electromagnetic Method for Local Defects Inspection of Wire Rope. Proceedings of the TENCON 2006—2006 IEEE Region 10 Conference, Hong Kong, China.10.1109/TENCON.2006.343716 ↗
7. Design of modified electromagnetic main-flux for steel wire rope inspection10.1016/j.ndteint.2007.10.006 ↗
8. Modeling of the yoke-magnetization in MFL-testing by finite elements10.1016/S0963-8695(03)00051-3 ↗
9. Ultrasonic guided wave-based testing technique for inspection of multi-wire rope structures10.1016/j.ndteint.2013.11.005 ↗
10. Wang, J., Miao, C., Wang, W., and Lu, X. (2007). Research of X-ray nondestructive detector for high-speed running conveyor belt with steel wire ropes. Electronic Imaging and Multimedia Technology V, SPIE.10.1117/12.755113 ↗
11. Underwater acoustic emission monitoring—Experimental investigations and acoustic signature recognition of synthetic mooring ropes10.1016/j.apacoust.2017.01.033 ↗
12. Bai, W., Chai, M., Li, L., Li, Y., and Duan, Q. (2014). Advances in Acoustic Emission Technology, Springer.
13. Nondestructive and quantitative evaluation of wire rope based on radial basis function neural network using eddy current inspection10.1016/j.ndteint.2011.09.015 ↗
14. A Review of Wire Rope Detection Methods, Sensors and Signal Processing Techniques10.1007/s10921-020-00732-y ↗
15. Zhou, P., Zhou, G., Zhu, Z., He, Z., Ding, X., and Tang, C. (2019). A Review of Non-Destructive Damage Detection Methods for Steel Wire Ropes. Appl. Sci., 9.10.3390/app9132771 ↗
16. A novel TMR-based MFL sensor for steel wire rope inspection using the orthogonal test method10.1088/0964-1726/24/7/075007 ↗
17. Jiang, X., and Xia, Y. (2022). A GA based optimized designation of detection sensor for broken steel stranded wire faults in ACSR. 2010 International Conference on High Voltage Engineering and Application, IEEE.10.1109/ICHVE.2010.5640793 ↗
18. Improve the signal to noise ratio and installation convenience of the inductive coil for wire rope nondestructive testing10.1016/j.ndteint.2017.09.005 ↗
19. Zhang, Y., Jing, L., Xu, W., Zhan, W., and Tan, J. (2019). A Sensor for Broken Wire Detection of Steel Wire Ropes Based on the Magnetic Concentrating Principle. Sensors, 19.10.3390/s19173763 ↗
20. Nondestructive Testing for Shallow Defect of Ferromagnetic Objects Based on Magnetic Probe Structure10.1109/TMAG.2018.2851456 ↗
21. A new signal processing method for the nondestructive testing of a steel wire rope using a small device10.1016/j.ndteint.2020.102299 ↗
22. Inspection of Mine Wire Rope Using Magnetic Aggregation Bridge Based on Magnetic Resistance Sensor Array10.1109/TIM.2020.2983232 ↗
23. Flexible GMR Sensor Array for Magnetic Flux Leakage Testing of Steel Track Ropes10.1155/2012/129074 ↗
24. A transducer made up of fluxgate sensors for testing wire rope defects10.1109/19.989914 ↗
25. A new magnetic flux leakage sensor based on open magnetizing method and its on-line automated structural health monitoring methodology10.1177/1475921715604387 ↗
26. A Magnetic Flux Leakage and Magnetostrictive Guided Wave Hybrid Transducer for Detecting Bridge Cables10.3390/s120100518 ↗
27. Quantitative method for detecting internal and surface defects in wire rope10.1016/j.ndteint.2021.102405 ↗
28. A new detection sensor for wire rope based on open magnetization method
29. Hua, G., Wang, H., Chen, F., Lu, Y., Xu, Z., Tian, J., and Zhou, B. (2009, January 17–19). Improving SNR of MFL Signal in Flaw Detection of Coal Mine Wire Ropes. Proceedings of the 2009 2nd International Congress on Image and Signal Processing, Tianjin, China.10.1109/CISP.2009.5304462 ↗
30. Azad, A., and Kim, N. (2019). Design and Optimization of an MFL Coil Sensor Apparatus Based on Numerical Survey. Sensors, 19.10.3390/s19224869 ↗