The Flow Resistance of the Filter Bags in the Dust Collector Operating in the Line of Wood-Based Furniture Panels Edge Banding
Source abstract
Abstract
The article describes the process of forming the wood dust filtration resistance generated during furniture production using the honeycomb board technology in a filtering installation operating in industrial conditions. The influence of the service life of the filter fabric on the filtration resistance values in industrial conditions for one installation and one type of filter fabric was analyzed. For this purpose, filter bags made of one type of filter material were used in an industrial filtering installation at four different times. The results were compared to those previously obtained at the same factory but with a different filter bag type. The analysis was based on the changes in the flow resistance of clean and dust-laden air through the filter fabric used at various times in the filtering installation of the narrow-surface treatment line in a furniture factory. This allowed for the determination of the dynamics and nature of changes in filtration resistance in industrial conditions for wood dust. The values of the dust resistance coefficient depend on the operating time and increased to the level of 20594 [s−1] for material A and from 6412.031 [s−1] to 10128.94 [s−1] for material B. The dimensional characteristics of the filtered dust and the technological conditions under which it was generated were also described.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Textile materials and evaluations · Aerosol Filtration and Electrostatic Precipitation · Material Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Furniture Design, Faculty of Wood Technology, Poznań University of Life Sciences, 60-627 Poznań, Poland
Department of Technology, Faculty of Natural Sciences, Matej Bel University, 974 01 Banská Bystrica, Slovakia
Department of Woodworking, Faculty of Wood Science and Technology, Technical University in Zvolen, 960 01 Zvolen, Slovakia
Funding
the Cultural and Educational Grant Agency of the Ministry of Education, Science, Research, and Sport of the Slovak Republic · VEGA · the Faculty of Forestry and Wood Technology, Poznań University of Life Sciences
References (35)
Show source-provided references
1. Očkajová, A., Kučerka, M., Kminiak, R., Krišťák, L., Igaz, R., and Réh, R. (2020). Occupational Exposure to Dust Produced When Milling Thermally Modified Wood. Int. J. Environ. Res. Public Health, 17.10.3390/ijerph17051478 ↗
2. Exposure to Wood Dust in Croatian Woodworking Industry
3. Effect of selected factors on mass concentration of airborne dust during wood sanding10.17973/MMSJ.2019_12_2019155 ↗
4. Assessment of Occupational Exposure to Wood Dust in the Polish Furniture Industry10.13075/mp.5893.00458 ↗
5. Wood Dust—Inhalable Fraction Documentation of Proposed Values of Occupational Exposure Limits (OELs)
6. (2022, May 15). Directive (EU) 2017/2398 of the European Parliament and of the Council of 12 December 2017 Amending Directive 2004/37/EC on the Protection of Workers from the Risks Related to Exposure to Carcinogens or Mutagens at Work. Available online: https://www.eumonitor.eu/9353000/1/j9vvik7m1c3gyxp/vklpgng5lezp.
7. The State of the Air Quality in Poland
8. Assessment of kidney function in carpenters exposed to wood dust in port-harcourt
9. Intestinal and Non-Intestinal Nasal Cavity Adenocarcinoma: Impact of Wood Dust Exposure10.1016/j.anorl.2018.08.012 ↗
10. Effects of Occupational Safety and Health Risk Management on the Rate of Work-Related Accidents in the Bulgarian Furniture Industry
11. Antov, P., and Neykov, N. (2017). Costs of Occupational Accidents in the Bulgarian Woodworking and Furniture Industry, Ss. Cyril and Methodius University.
12. Kristak, L., Antov, P., Bekhta, P., Lubis, M.A.R., Iswanto, A.H., Reh, R., Sedliacik, J., Savov, V., Taghiyari, H.R., and Papadopoulos, A.N. (2022). Recent Progress in Ultra-Low Formaldehyde Emitting Adhesive Systems and Formaldehyde Scavengers in Wood-Based Panels: A Review. Wood Mater. Sci. Eng., 1–20.10.1080/17480272.2022.2056080 ↗
13. Antov, P., Savov, V., Trichkov, N., Krišťák, L., Réh, R., Papadopoulos, A.N., Taghiyari, H.R., Pizzi, A., Kunecová, D., and Pachikova, M. (2021). Properties of High-Density Fiberboard Bonded with Urea–Formaldehyde Resin and Ammonium Lignosulfonate as a Bio-Based Additive. Polymers, 13.10.3390/polym13162775 ↗
14. Impact Study of a Dust Removal System on Reduction of Selected Health Hazards of Employees in Carpentry
15. Influence of the Size Distribution and Concentration on Wood Dust Explosion: Experiments and Reaction Modelling10.1016/j.powtec.2005.05.021 ↗
16. Agglomeration of Wood Dust and Charcoal Powder for Solid Fuel Production
17. Międzynarodowy rynek pelletów drzewnych
18. Fico, D., Rizzo, D., Casciaro, R., and Esposito Corcione, C. (2022). A Review of Polymer-Based Materials for Fused Filament Fabrication (FFF): Focus on Sustainability and Recycled Materials. Polymers, 14.10.3390/polym14030465 ↗
19. Influence of Rice Husk and Wood Biomass Properties on the Manufacture of Filaments for Fused Deposition Modeling10.3389/fchem.2019.00735 ↗
20. Evaluation of Operating Conditions during the Pulse Jet Cleaning Filtration Using Different Surface Treated Fibrous Filters10.1016/j.psep.2016.10.010 ↗
21. (2004). Testing of Cleanable Filter Media—Standard Test for the Evaluation of Cleanable Filter Media 2004 (Standard No. DIN—VDI 3926 BLATT 1).
22. (2017). Air Quality—Test Method for Filtration Characterization of Cleanable Filter Media 2017 (Standard No. ISO 11057:2011).
23. Modeling the Pressure Drop Behavior of Cleanable Dust Filters during Pressure-Controlled Operation10.1080/01496395.2017.1331244 ↗
24. New developments for optimal selection of filter media in fine dust bag-house filtration
25. Experimental Investigation of Deposition and Removal of Particles during Gas Filtration with Various Fabric Filters10.1016/j.seppur.2011.04.031 ↗
26. Effect of Moisture Content in Coal Dust on Filtration and Cleaning Performance of Filters
27. Emission of Fine Particles and Ageing Behavior of PTFE Finished Filter Media during Industrial Pollution Control
28. Dembiński, C., Potok, Z., Dolny, S., Kminiak, R., and Rogoziński, T. (2021). Performance of Filter Bags Used in Industrial Pulse-Jet Baghouses in Wood-Based Panels Furniture Factory. Appl. Sci., 11.10.3390/app11198965 ↗
29. Potok, Z., and Rogoziński, T. (2020). Pilot-Scale Study on the Specific Resistance of Beech Wood Dust in a Pulse-Jet Filter. Sustainability, 12.10.3390/su12124816 ↗
30. Pilot-Scale Study on the Influence of Wood Dust Type on Pressure Drop during Filtration in a Pulse-Jet Baghouse10.1016/j.psep.2018.07.016 ↗
31. Influence of Air Humidity on Particle Filtration Performance of a Pulse-Jet Bag Filter10.1016/j.jaerosci.2019.01.002 ↗
32. Dust Loading Performance of the PTFE HEPA Media and Its Comparison with the Glass Fibre HEPA Media10.4209/aaqr.2017.11.0481 ↗
33. Liu, X., Shen, H., and Nie, X. (2019). Study on the Filtration Performance of the Baghouse Filters for Ultra-Low Emission as a Function of Filter Pore Size and Fiber Diameter. Int. J. Environ. Res. Public Health, 16.10.3390/ijerph16020247 ↗
34. Experimental Study of Cake Formation on Heat Treated and Membrane Coated Needle Felts in a Pilot Scale Pulse Jet Bag Filter Using Optical In-Situ Cake Height Measurement10.1016/j.powtec.2011.08.037 ↗
35. Exploration of PM2.5 Filtration Property of Filter Bag for Environment Protection10.1088/1755-1315/69/1/012040 ↗