Portable Prototype of Hydrogen Fuel Cells for Educational Training
Source abstract
Abstract
This paper presents an experimental prototype of hydrogen fuel cells suitable for training engineering students. The presented system is designed to teach students the V-I characteristics of the fuel cells and how to record the V-I characteristics curve in the case of a single or multiple fuel cells. The prototype contains a compact electrolyzer to produce hydrogen and oxygen to the fuel cell. The fuel cell generates electricity to supply power to various types of loads. The paper also illustrates how to calculate the efficiency of fuel cells in series and parallel modes of operation. In the series mode of operation, it is mathematically proven that the efficiency is higher at lower currents. Still, the fuel cell operating area is required where the power is the highest. According to experimental results, the efficiency in the case of series connection is approximately 25%, while in parallel operation mode, the efficiency is about 50%. Thus, a parallel connection is recommended in the high current applications because the efficiency is higher than the one resulted from series connection. As explained later in the study plan, several other experiments can be performed using this educational kit.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fuel Cells and Related Materials · Hybrid Renewable Energy Systems · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Electrical Engineering Department, College of Engineering, Najran University, Najran 11001, Saudi Arabia
Funding
Deanship of Scientific Research
References (51)
Show source-provided references
1. Fuel cells: History and updating. A walk along two centuries10.1016/j.rser.2009.03.015 ↗
2. VIII. On the gas voltaic battery.—Experiments made with a view of ascertaining the rationale of its action and its application to eudiometry
3. Ortiz-Rivera, E., Salazar-Llinas, A., and Velez-Delgado, J. (2009, January 18–21). An enriched undergraduate research experience based on the simulation, experiments, and theory of fuel cells. Proceedings of the 2009 39th IEEE Frontiers in Education Conference, San Antonio, TX, USA.10.1109/FIE.2009.5350772 ↗
4. Fuel cells and biofuel cells: From past to perspectives10.1002/ijch.202000039 ↗
5. Hydrogen the future transportation fuel: From production to applications10.1016/j.rser.2014.11.093 ↗
6. Demirbas, A. (2009). Biohydrogen, Springer.10.1007/978-1-84882-511-6 ↗
7. XVII. Note on the development of voltaic electricity by atmospheric oxidation of combustible gases and other substances10.1098/rspl.1889.0048 ↗
8. Spiegel, C. (2011). PEM Fuel Cell Modeling and Simulation Using MATLAB, Elsevier.
9. Lorca Martínez, J.M. (2022, November 22). Optimización del contenido de catalizador en una pila de combustible tipo PEM. Available online: https://repositorio.upct.es/bitstream/handle/10317/9892/tfg-lor-opt.pdf?sequence=1.
10. Fuel cells: The expectations for an environmental-friendly and sustainable source of energy10.1016/j.rser.2011.07.100 ↗
11. Turco, M., Ausiello, A., and Micoli, L. (2016). Fuel cells operating and structural features of MCFCs and SOFCs. Treatment of Biogas for Feeding High Temperature Fuel Cells, Springer.10.1007/978-3-319-03215-3 ↗
12. The energy requirements of a developed world10.1016/j.esd.2016.04.001 ↗
13. Energy resources and global development10.1126/science.1091939 ↗
14. When will fossil fuel reserves be diminished?10.1016/j.enpol.2008.08.016 ↗
15. A review on buildings energy consumption information10.1016/j.enbuild.2007.03.007 ↗
16. Review of fossil fuels and future energy technologies10.1016/j.futures.2015.03.003 ↗
17. Hybrid inorganic-organic proton-conducting membranes based on SPEEK doped with WO3 nanoparticles for application in vanadium redox flow batteries10.1016/j.electacta.2019.03.056 ↗
18. Review of the Development of First-Generation Redox Flow Batteries: Iron-Chromium System10.1002/cssc.202101798 ↗
19. Cader, J., Koneczna, R., and Olczak, P. (2021). The Impact of Economic, Energy, and Environmental Factors on the Development of the Hydrogen Economy. Energies, 14.10.3390/en14164811 ↗
20. Batteries and ultracapacitors for electric, hybrid, and fuel cell vehicles10.1109/JPROC.2007.892490 ↗
21. Mench, M.M. (2008). Fuel Cell Engines, John Wiley & Sons.10.1002/9780470209769 ↗
22. Performance of a stand-alone renewable energy system based on energy storage as hydrogen10.1109/TEC.2004.827719 ↗
23. Lucas Nülle, G. (2022, November 22). Electrical Power Engineering, Renewable Energies, EPH 2 Advanced Photovoltaics Trainer (PV). Available online: https://www.4test.no/cosmoshop/default/artikelpdf/LN-5677-EPH_en.pdf.
24. Farias, C.B.B., Barreiros, R.C.S., da Silva, M.F., Casazza, A.A., Converti, A., and Sarubbo, L.A. (2022). Use of Hydrogen as Fuel: A Trend of the 21st Century. Energies, 15.10.3390/en15010311 ↗
25. Prospects and impediments for hydrogen and fuel cell vehicles in the transport sector10.1016/j.ijhydene.2020.03.122 ↗
26. Main factors affecting the lifetime of Proton Exchange Membrane fuel cells in vehicle applications: A review10.1016/j.apenergy.2014.03.048 ↗
27. The development of fuel cell electric vehicles–A review10.1016/j.matpr.2020.03.679 ↗
28. Proton exchange membrane fuel cell system model for automotive vehicle simulation and control10.1115/1.1447927 ↗
29. Fuel economy of hydrogen fuel cell vehicles10.1016/j.jpowsour.2003.12.061 ↗
30. Optimal operation of a grid-connected fuel cell based combined heat and power systems using particle swarm optimisation for residential sector10.1080/01430750.2018.1562968 ↗
31. Design of a PEM fuel cell system for residential application10.1016/j.ijhydene.2008.09.038 ↗
32. An overview of polymer electrolyte membrane electrolyzer for hydrogen production: Modeling and mass transport10.1016/j.jpowsour.2016.01.012 ↗
33. Modeling of advanced alkaline electrolyzers: A system simulation approach10.1016/S0360-3199(02)00033-2 ↗
34. Stempien, J.P., Sun, Q., and Chan, S.H. (2013). Solid Oxide Electrolyzer Cell Modeling: A Review. J. Power Technol., 93.
35. Liskins, H.F., and Jackson, J.F. (1987). Cell Components, Springer.
36. O’hayre, R., Cha, S.-W., Colella, W., and Prinz, F.B. (2009). Fuel Cell Fundamentals, Wiley.
37. Hydrogen production from water electrolysis: Role of catalysts10.1186/s40580-021-00254-x ↗
38. Soil exposure modifies the gut microbiota and supports immune tolerance in a mouse model10.1016/j.jaci.2018.06.024 ↗
39. Bipolar plates for PEM fuel cells: A review10.1016/j.ijhydene.2005.04.016 ↗
40. The reactant starvation of the proton exchange membrane fuel cells for vehicular applications: A review10.1016/j.enconman.2018.12.049 ↗
41. Effect of flow field design on performances of high temperature PEM fuel cells: Experimental analysis10.1016/j.ijhydene.2010.10.026 ↗
42. Meyers, R.A. (2002). Encyclopedia of Physical Science and Technology, Academic.
43. Progress and perspectives of integrated thermal management systems in PEM fuel cell vehicles: A review10.1016/j.rser.2021.111908 ↗
44. Carlsson, G.A., and Ljungberg, M. (2022). Basic Atomic and Nuclear Physics. Handbook of Nuclear Medicine and Molecular Imaging for Physicists, CRC Press.10.1201/9780429489501 ↗
45. Nuclear physics A. Stationary states of nuclei10.1103/RevModPhys.8.82 ↗
46. Whittle, K. (2016). Nuclear Materials Science, IOP Publishing.10.1088/978-0-7503-1104-5 ↗
47. McQuarrie, D.A. (1983). Quantum Chemistry, University Science Books.
48. Bland, W.J., and Rolls, D. (2016). Weathering: An Introduction to the Scientific Principles, Routledge.10.4324/9781315824918 ↗
49. Experimental study on hydrogen leakage and emission of fuel cell vehicles in confined spaces10.1007/s42154-020-00096-z ↗
50. Sakamoto, J., Misono, H., Nakayama, J., Kasai, N., Shibutani, T., and Miyake, A. (2018). Evaluation of safety measures of a hydrogen fueling station using physical modeling. Sustainability, 10.10.3390/su10113846 ↗
51. PEMFC for aeronautic applications: A review on the durability aspects10.1515/eng-2017-0035 ↗