journal article·2022-04-12Open access

Scoliosis Brace Finite Element Model and Preliminary Experimental Testing Using Electronic Speckle Pattern Interferometry

Slawomir Grycuk, Piotr Mrozek

Applied Sciences· Volume 12· Issue 8

Abstract

This article presents the results of numerical finite element method (FEM) simulations in the Ansys environment of a Boston orthopaedic brace. The geometric model was developed based on the results of digitisation performed by means of a three-dimensional (3D) optical scanner. A test stand for measurement of the brace’s field of displacements, utilising a laser electronic speckle pattern interferometer (ESPI), was used to experimentally verify the FEM model. During experimental testing, special attention was given to applying the loads and boundary conditions used in the numerical simulations. As a result, the relative difference between the experimentally and numerically determined displacements in the central part of orthoses amounted to approximately 0.6%. The experimentally verified FEM model was used to determine the force flow lines characteristic of the brace, indicating the general working method of the brace’s structure. The primary parts of the orthoses, carrying loads correcting the spine and the position of sites exerting little effort from the perspective of their participation in the orthoses’ essential therapeutic application were identified. The results obtained allow for the proposal of methods for mechanical optimisation of the brace’s design. The analysis conducted is universal in nature and can be adapted to other types of orthopaedic braces.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Scoliosis diagnosis and treatment · Spinal Fractures and Fixation Techniques · Elasticity and Material Modeling

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Mechanical Engineering, Doctoral School of Bialystok University of Technology, Wiejska 45A, 15-351 Bialystok, Poland

Institute of Biomedical Engineering, Faculty of Mechanical Engineering, Bialystok University of Technology, Wiejska 45C, 15-351 Bialystok, Poland

Funding

PO WER European Funds

References (29)

Show source-provided references
1. Mechanical and Clinical Evaluation of a Shape Memory Alloy and Conventional Struts in a Flexible Scoliotic Brace10.1007/s10439-018-2016-8 ↗
2. Tridimensional Trunk Surface Acquisition for Brace Manufacturing in Idiopathic Scoliosis10.1007/s00586-014-3337-4 ↗
3. Design and Validation of Transducers to Measure Interface Force Distribution in a Spinal Orthosis10.1016/j.medengphy.2011.12.022 ↗
4. A Specific Scoliosis Classification Correlating with Brace Treatment: Description and Reliability10.1186/1748-7161-5-1 ↗
5. TLSO Biomechanics of Correction (Investigating the Rationale for Force Vector Selection)10.1186/1748-7161-1-11 ↗
6. Biomechanical Modeling of Brace Treatment of Scoliosis: Effects of Gravitational Loads10.1007/s11517-011-0737-z ↗
7. A Biomechanical Study of the Charleston Brace for the Treatment of Scoliosis10.1097/BRS.0b013e3181c5b5fa ↗
8. Comparison of the Biomechanical 3D Efficiency of Different Brace Designs for the Treatment of Scoliosis Using a Finite Element Model10.1007/s00586-009-1268-2 ↗
9. Effectiveness of Braces Designed Using Computer-Aided Design and Manufacturing (CAD/CAM) and Finite Element Simulation Compared to CAD/CAM Only for the Conservative Treatment of Adolescent Idiopathic Scoliosis: A Prospective Randomized Controlled Trial10.1007/s00586-016-4434-3 ↗
10. Prediction of Brace Effect in Scoliotic Patients: Blinded Evaluation of a Novel Brace Simulator—an Observational Cross-Sectional Study10.1007/s00586-019-05948-9 ↗
11. Design and Analysis of a Shell Mechanism Based Two-Fold Force Controlled Scoliosis Brace
12. Development of CAD/CAM Based Brace Models for the Treatment of Patients with Scoliosis-Classification Based Approach versus Finite Element Modelling10.4184/asj.2015.9.5.661 ↗
13. Shape Modification of the Boston Brace Using a Finite-Element Method with Topology Optimization10.1097/BRS.0b013e31815cda9c ↗
14. Biomechanical Modelling of Orthotic Treatment of the Scoliotic Spine Including a Detailed Representation of the Brace-Torso Interface10.1007/BF02344709 ↗
15. Personalized Biomechanical Simulations of Orthotic Treatment in Idiopathic Scoliosis10.1016/j.clinbiomech.2003.11.003 ↗
16. A Mechanical Analog Thoracolumbar Spine Model for the Evaluation of Scoliosis Bracing Technology
17. Determination of Three-Dimensional Corrective Force in Adolescent Idiopathic Scoliosis and Biomechanical Finite Element Analysis10.3389/fbioe.2020.00963 ↗
18. A 3D Visualization Tool for the Design and Customization of Spinal Braces10.1016/j.compmedimag.2007.07.006 ↗
19. Brace Technology Thematic Series: The 3D Rigo Chêneau-Type Brace10.1186/s13013-017-0114-2 ↗
20. The Use of Electronic Speckle Pattern Interferometry for Evaluation of Machine Tool Static Stiffness
21. The Control System Based on FPGA Technology For Fatigue Test Stand MZGS-100 PL10.1515/meceng-2015-0006 ↗
22. Sanz-Pena, I., Arachchi, S., Halwala-Vithanage, D., Mallikarachchi, S., Kirumbara-Liyanage, J., McGregor, A., Silva, P., and Newell, N. (2021). Characterising the Mould Rectification Process for Designing Scoliosis Braces: Towards Automated Digital Design of 3D-Printed Braces. Appl. Sci., 11.10.3390/app11104665 ↗
23. Numerical Analysis of Scoliosis Brace
24. Optimization Method for 3D Bracing Correction of Scoliosis Using a Finite Element Model10.1007/s005860000135 ↗
25. Polypropylene Tensile Test under Dynamic Loading
26. Kleiber, M., Burczynski, T., Wilde, K., and Gorski, J. (2016). Construction of Stress Trajectories in Optimal, Non-Homogeneous Elastic Bodies. Advances in Mechanics: Theoretical, Computational and Interdisciplinary Issues, CRC Press.10.1201/b20057 ↗
27. Interpreting Load Paths and Stress Trajectories in Elasticity10.1108/02644400010313084 ↗
28. Boston Brace International, Inc. (2003). Reference Manual for the Boston Scoliosis Brace, Boston Brace International, Inc.
29. Investigation of Future 3D Printed Brace Design Parameters: Evaluation of Mechanical Properties and Prototype Outcomes10.2217/3dp-2019-0012 ↗