Instability Study of Magnetic Journal Bearing under S-CO2 Condition
Source abstract
Abstract
A supercritical CO2 (S-CO2)-cooled Brayton cycle is under development for distributed power applications for remote regions. In order to successfully develop it, issues of controlling shaft levitation with bearings have to be solved. From several studies, magnetic bearings have been suggested for reliable levitation performance with reduced cost and complexity. However, several studies on magnetic bearing show that instability issues under high-pressure fluid and high-speed operating conditions may exist. The purpose of this research is to provide background for understanding the instability of magnetic bearings under S-CO2 conditions and propose functional requirements of the magnetic bearing. Thus, the rotating shaft with magnetic bearings operating under high pressure fluid was first analyzed. To test the theory, a magnetic bearing test rig was constructed. By comparing experimental data to the analysis results, the analysis results were verified. Therefore, the analysis results can be used for predicting instability in the future and can contribute to the development of better magnetic bearing controllers.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Tribology and Lubrication Engineering · Magnetic Bearings and Levitation Dynamics · Adhesion, Friction, and Surface Interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology (KAIST), 373-1 Guseong-dong, Yuseong-gu, Daejeon 305-701, Korea
Korea Atomic Energy Research Institute, 150-1 DukJin-Dong, Daejeon 305-353, Korea
Funding
Agency for Defense Development
References (23)
Show source-provided references
1. Dostal, V., Driscoll, M., and Hejzlar, P. (2004). A Supercritical Carbon Dioxide Cycle for Next Generation Nuclear Reactors. [Ph.D. Thesis, Massachusetts Institute of Technology].
2. Moroz, L., Burlaka, M., and Rudenko, O. (2014, January 9–10). Study of a Supercritical CO2 Power Cycle Application in a Cogeneration Power Plant. Proceedings of the Supercritical CO2 Power Cycle Symposium, Pittburgh, PA, USA.
3. Heshmat, H., Walton, J., and Córdova, J.L. (2018, January 27–29). Technology Readiness of 5th and 6th Generation Compliant Foil Bearing for 10 MWE s-CO2 Turbomachinery Systems. In Proceeding of the 6th International Supercritical CO2 Power Cycles Symposium, Pittsburg, PA, USA.
4. Wright, S.A., Conboy, T.M., and Rochau, G.E. (2011). Supercritical CO2 Power Cycle Development Summary at Sandia National Laboratories, Sandia National Labaratories (SNL-NM).
5. Tsuji, T., Namikawa, D., Hiaki, T., and Ito, M. (2004, January 1). Solubility and Liquid Density Measurement for CO2+ Lubricant at High Pressures. Proceedings of the Asian Pacific Confederation of Chemical Engineering Congress Program and Abstracts, Kitakyushu, Japan.
6. Seeton, C.J., and Hrnjak, P. (2006, January 17–20). Thermophysical Properties of CO2-lubricant Mixtures and Their Affect on 2-phase Flow in Small Channels (Less than 1mm). Proceedings of the International Refrigeration and Air Conditioning Conference at Purdue, West Lafayette, IN, USA.
7. Application of Active Magnetic Bearings in Flexible Rotordynamic Systems–A State-of-the-art Review10.1016/j.ymssp.2018.01.010 ↗
8. Onuma, H., Masuzawa, T., and Okada, Y. (2010). Hybrid Magnetic Bearing. (7,683,514), U.S. Patent.
9. Novel Heteropolar Radial Hybrid Magnetic Bearing with Low Rotor Core Loss
10. Chen, H., Jiang, B., Ding, S.X., and Huang, B. (2020). Data-Driven Fault Diagnosis for Traction Systems in High-Speed Trains: A Survey, Challenges, and Perspectives. IEEE Trans. Intell. Transp. Syst., 1–17.
11. Cha, J.E., Cho, S.K., Lee, J., and Lee, J.I. (2016, January 11–13). Supercritical CO2 Compressor with Active Magnetic Bearing. Proceedings of the Transactions of the Korean Nuclear Society Spring Meeting, Jeju, Korea.
12. Kim, D., Baik, S., and Lee, J.I. (2020, January 9–10). Frequency Analysis of Magnetic Journal Bearing Instability for MMR Condition. Proceedings of the Transactions of the Korean Nuclear Society Virtual Spring Meeting.
13. Dynamic Stiffness Analysis and Experimental Verification of Axial Magnetic Bearing Based on Air Gap Flux Variation in Magnetically Suspended Molecular Pump10.1186/s10033-020-00469-9 ↗
14. Discussion on the Reynolds Equation for the Slipper Bearing Modeling in Axial Piston Pumps10.1016/j.triboint.2017.09.027 ↗
15. Snyder, T., and Braun, M. (2018). Comparison of Perturbed Reynolds Equation and CFD Models for the Prediction of Dynamic Coefficients of Sliding Bearings. Lubricants, 6.10.3390/lubricants6010005 ↗
16. Numerical Analyzes and Experimental Investigations on the Fully-coupled Thermo-elasto-gasdynamic Behavior of Air Foil Journal Bearings10.1016/j.ymssp.2020.107221 ↗
17. Research on Automatic Balance Control of Active Magnetic Bearing-Rigid Rotor System10.1155/2019/7142819 ↗
18. Hamrock, B.J., Schmid, S.R., and Jacobson, B.O. (2004). Fundamentals of Fluid Film Lubrication, CRC Press.10.1201/9780203021187 ↗
19. Tribology: Friction, Lubrication, and Wear10.1115/1.3251662 ↗
20. Turbulent Lubrication Theory—Application to Design10.1115/1.3451905 ↗
21. Dousti, S., and Allaire, P. (2016, January 29–31). A Compressible Hydrodynamic Analysis of Journal Bearings Lubricated with Supercritical Carbon Dioxide. In Proceeding of Supercritical CO2 Power Cycle Symposium, San Antonio, TX, USA.
22. Gunter, E.J. (2009, January 23–27). Understanding Amplitude and Phase in Rotating Machinery. Proceedings of the Vibration Institute 33rd Annual Meeting, Harrisburg, PA, USA.
23. The Influence of Same-Sign Cross-Coupled Stiffness on Rotordynamics10.1115/1.2346690 ↗