Inspection Robot and Wall Surface Detection Method for Coal Mine Wind Shaft
Source abstract
Abstract
The coal mine wind shaft is an important ventilation channel in coal mines, and it is of great significance to ensure its long-term safety. At present, the inspection of wind shafts still depends on manual work, which has low reliability and high risk. There are two main problems in the shaft wall detection of ventilation shafts: (1) The humidity and dust concentration in ventilation shafts are high, which makes imaging difficult; (2) the cracks on the shaft wall are long and irregular, so it is impossible to acquire the information of the whole crack from a single photo. Firstly, the mapping analysis between the concentration of water vapor and dust in the wind shaft and the image definition is determined by experiments. Then, the inspection robot is designed to move along the axial and circumferential directions to get close to the shaft wall, and the rack-and-rail drive design is adopted to ensure the real-time position feedback of the robot. Then, through the crack parameter detection method based on depth learning, the movement direction of the robot is controlled according to the crack direction so as to ensure that the complete crack parameters are obtained. Finally, the crack detection algorithm is verified by experiments.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Infrastructure Maintenance and Monitoring · Non-Destructive Testing Techniques · Asphalt Pavement Performance Evaluation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Jiangsu Key Laboratory of Mine Mechanical and Electrical Equipment, School of Mechatronic Engineering, China University of Mining and Technology, Xuzhou 221116, China
Funding
National Natural Science Foundation of China · Natural Science Foundation of Jiangsu Province for Youths
References (32)
Show source-provided references
1. The development effect of the coal industry in the 13th Five-Year Plan and the implementation path of the goal of “double carbon”
2. Aerological risk management in preparation for mining of coal mines10.21177/1998-4502-2022-14-1-107-116 ↗
3. Bosikov, I.I., Martyushev, N.V., Klyuev, R.V., Savchenko, I.A., Kukartsev, V.V., Kukartsev, V.A., and Tynchenko, Y.A. (2023). Modeling and Complex Analysis of the Topology Parameters of Ventilation Networks When Ensuring Fire Safety While Developing Coal and Gas Deposits. Fire, 6.10.3390/fire6030095 ↗
4. Analysis and treatment of shaft fracture mechanism in Hengyuan Coal Mine
5. Research on intelligent inspection robot system for shaft safety
6. Cao, X., Jin, Z., Wang, C., and Dong, M. (2016, January 19–22). Kinematics simulation of environmental parameter monitor robot used in coalmine underground. Proceedings of the 2016 13th International Conference on Ubiquitous Robots and Ambient Intelligence (URAI), Xi’an, China.10.1109/URAI.2016.7625783 ↗
7. Sun, G., Li, P., Meng, Y., Xu, E., Zhou, Y., and Liu, Y. (2017, January 5–8). A Climbing Robot for Inspection of Lamppost in the Airport: Design and Preliminary Experiments. Proceedings of the 2017 IEEE International Conference on Robotics and Biomimetics, Macau, China.10.1109/ROBIO.2017.8324456 ↗
8. Ratanghayra, P.R., Hayat, A.A., and Saha, S.K. (2018). Design and Analysis of Spring-Based Rope Climbing Robot. Machines, Mechanism and robotics, Lecture Notes in Mechanical Engineering, Springer.10.1007/978-981-10-8597-0_38 ↗
9. Development of Pneumatic Robot for Climbing Sluice Wire Rope
10. Zhang, W., Zheng, Z., Fu, X., Hazken, S., Chen, H., Zhao, M., and Ding, N. (October, January 27). CCRobot-IV-F: A Ducted-Fan-Driven Flying-Type Bridge-Stay-Cable Climbing Robot. Proceedings of the 2021 IEEE/RSJ International Conference on Intelligent Robots and Systems, Prague, Czech Republic.10.1109/IROS51168.2021.9636022 ↗
11. Design and Implementation of a Cable Inspection Robot for Cable-Stayed Bridges
12. A Climbing Robot for Steel Bridge Inspection10.1007/s10846-020-01266-1 ↗
13. NB-CNN: Deep learning-based crack detection using convolutional neural network and naïve bayes data fusion10.1109/TIE.2017.2764844 ↗
14. Bridge Crack Detection and Identification Based on Convolutional Neural Network Transfer Learning
15. Morphology-based crack detection for steel slabs10.1109/JSTSP.2012.2212416 ↗
16. Concrete crack detection by multiple sequential image filtering10.1111/j.1467-8667.2011.00716.x ↗
17. Muduli, P.R., and Pati, U.C. (2013, January 4–6). A novel technique for wall crack detection using image fusion. Proceedings of the 2013 International Conference on Computer Communication and Informatics, Coimbatore, India.10.1109/ICCCI.2013.6466288 ↗
18. Evaluation of Crack Propagation in Concrete Bridges from Vehicle-Mounted Camera Images Using Deep Learning and Image Processing10.3389/fbuil.2022.972796 ↗
19. Intelligent Crack Detection and Quantification in the Concrete Bridge: A Deep Learning-Assisted Image Processing Approach10.1155/2022/1813821 ↗
20. Autonomous structural visual inspection using region-based deep learning for detecting multiple damage types10.1111/mice.12334 ↗
21. Concrete crack detection with handwriting script interferences using faster region-based convolutional neural network10.1111/mice.12497 ↗
22. A crack detection algorithm for concrete pavement based on attention mechanism and multi-features fusion
23. Zhang, L., Yang, F., Zhang, Y.D., and Zhu, Y.J. (2016, January 25–28). Road crack detection using deep convolutional neural network. Proceedings of the 2016 IEEE International Conference on Image Processing (ICIP), Phoenix, AZ, USA.10.1109/ICIP.2016.7533052 ↗
24. Kolappan Geetha, G., Yang, H.-J., and Sim, S.-H. (2023). Fast Detection of Missing Thin Propagating Cracks during Deep-Learning-Based Concrete Crack/Non-Crack Classification. Sensors, 23.10.3390/s23031419 ↗
25. Computer vision-based statistical crack quantification for concrete structures10.1016/j.measurement.2023.112632 ↗
26. State Administration of Work Safety (2016). Coal Mine Safety Regulations, Coal Industry Press.
27. Selection of guide wire rope and calculation of tension
28. (2006). Steel Wire Rope for Important Use (Standard No. GB 8918-2006).
29. Zhou, P., Zhou, G., Zhu, Z., Tang, C., He, Z., Li, W., and Jiang, F. (2018). Health Monitoring for Balancing Tail Ropes of a Hoisting System Using a Convolutional Neural Network. Appl. Sci., 8.10.3390/app8081346 ↗
30. Li, D. (2015). Research on Image Mosaic and Feature Extraction Based on SIFT. [Master’s Thesis, University of Electronic Science and Technology of China].
31. Crack detection using image processing: A critical review and analysis10.1016/j.aej.2017.01.020 ↗
32. Efficient crack detection algorithm based on improved saliency map