Influences of mullite fibers on mechanical and thermal properties of silica‐based ceramic cores
Source abstract
Abstract
Abstract Mullite fibers composite silica‐based ceramic cores were successfully prepared by injection molding. The effects of mullite fibers on the mechanical and thermal properties of ceramic cores were investigated. The results indicated that the linear shrinkage was significantly decreased and the porosity was gradually increased with the increase of mullite fibers. In addition, the flexural strength for the room temperature and the simulated casting temperature of 1500°C was increased to a maximum value when the content of mullite fibers was about 1 wt.%, and then decreased with the increase of mullite fibers. The mullite fibers of 1 wt.% presented excellent mechanical properties with a linear shrinkage of .65%, a porosity of 6.96%, and a flexural strength of 17 MPa at room temperature and 34.83 MPa at the simulated casting temperature of 1500°C. Besides, the change in microstructure and properties in various contents of mullite fibers were analyzed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory of Advanced Special Steel & Shanghai Key Laboratory of Advanced Ferrometallurgy & School of Materials Science and Engineering Shanghai University Shanghai China
China United Gas Turbine Technology Co., Ltd. Beijing China
Funding
National Natural Science Foundation of China · National Science and Technology Major Project
References (31)
Show source-provided references
1. ThomasM Materials development in aero gas turbines. In:Proceedings of the 5th International Charles Parsons Turbine Conference China.2000;709–23.
2. 10.1023/A:102006050831110.1023/A:1020060508311 ↗
3. 10.1111/j.1151-2916.2002.tb00171.x10.1111/j.1151-2916.2002.tb00171.x ↗
4. 10.1016/j.jeurceramsoc.2013.06.02510.1016/j.jeurceramsoc.2013.06.025 ↗
5. 10.1016/j.ceramint.2013.04.10710.1016/j.ceramint.2013.04.107 ↗
6. 10.1016/j.ceramint.2019.06.17810.1016/j.ceramint.2019.06.178 ↗
7. 10.1016/j.ceramint.2016.02.13710.1016/j.ceramint.2016.02.137 ↗
8. 10.1111/jace.1350510.1111/jace.13505 ↗
9. 10.1016/j.ceramint.2016.06.10010.1016/j.ceramint.2016.06.100 ↗
10. 10.1016/j.ceramint.2013.06.10810.1016/j.ceramint.2013.06.108 ↗
11. 10.1016/j.jeurceramsoc.2011.03.00510.1016/j.jeurceramsoc.2011.03.005 ↗
12. 10.1016/j.jmst.2016.02.01210.1016/j.jmst.2016.02.012 ↗
13. 10.1016/j.ceramint.2013.05.00310.1016/j.ceramint.2013.05.003 ↗
14. 10.1016/j.jeurceramsoc.2008.05.03210.1016/j.jeurceramsoc.2008.05.032 ↗
15. 10.1016/j.ceramint.2012.09.05910.1016/j.ceramint.2012.09.059 ↗
16. 10.1016/j.ceramint.2016.01.06410.1016/j.ceramint.2016.01.064 ↗
17. K value method calculation of crystallization of porous silicon‐based ceramic cores and the corresponding performance analysis
18. 10.1016/j.jallcom.2020.15449410.1016/j.jallcom.2020.154494 ↗
19. 10.1016/j.ceramint.2018.07.25310.1016/j.ceramint.2018.07.253 ↗
20. 10.1016/j.ceramint.2019.01.06810.1016/j.ceramint.2019.01.068 ↗
21. 10.1016/j.jeurceramsoc.2012.10.01110.1016/j.jeurceramsoc.2012.10.011 ↗
22. 10.1063/1.172187410.1063/1.1721874 ↗
23. 10.1111/j.1151-2916.1991.tb06780.x10.1111/j.1151-2916.1991.tb06780.x ↗
24. 10.1016/j.msea.2008.12.01610.1016/j.msea.2008.12.016 ↗
25. 10.1016/j.jeurceramsoc.2020.07.05810.1016/j.jeurceramsoc.2020.07.058 ↗
26. 10.1016/j.jallcom.2015.02.01710.1016/j.jallcom.2015.02.017 ↗
27. Effect of fused silica fiber on the shrinkage and properties of silica based ceramic core
28. Basic research of ceramic core for solidification controlled castings
29. 10.1016/j.ceramint.2013.10.09710.1016/j.ceramint.2013.10.097 ↗
30. 10.1016/j.ceramint.2017.09.18910.1016/j.ceramint.2017.09.189 ↗
31. 10.1016/j.jmst.2015.12.01610.1016/j.jmst.2015.12.016 ↗