Modeling, Design and Suspension Force Analysis of a Novel AC Six-Pole Heteropolar Hybrid Magnetic Bearing
Source abstract
Abstract
To improve the radial suspension force of heteropolar hybrid magnetic bearing (HMB), a novel AC six-pole heteropolar HMB is proposed. Firstly, the structure, magnetic circuit, and suspension force generation principle are introduced and analyzed. Secondly, the equivalent magnetic circuits are established. The mathematical models of magnetic resistances, air gap magnetic fluxes, and levitation force are derived by node magnetomotive force (MMF) method. The main parameters of prototype heteropolar HMB, such as outer and inner air-gap length, winding turns, and permanent magnets, are designed. Then, the analysis model is established by MagNet 3D. The magnetic circuit, air-gap flux density, suspension mechanism, force-current relationships, force-displacement relationships, and force coupling characteristics are analyzed and calculated. Finally, the experimental system was built to test the levitation force and levitation displacement waveforms. The research results have shown that the proposed novel six-pole heteropolar HMB has a reasonable structure and magnetic circuit. The design method is also proven to be correct. Furthermore, it is compared with the traditional heteropolar six-pole HMB, the maximum suspension forces in the X and Y directions are increased by 1.96 and 2.02 times, respectively.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Magnetic Bearings and Levitation Dynamics · Tribology and Lubrication Engineering · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Electronic and Information Engineering, Anhui Jianzhu University, Hefei 230009, China
Funding
Project of Anhui Housing and Urban-Rural Construction Science and Technology Planning
References (31)
Show source-provided references
1. A review of superconducting magnetic bearings and their application
2. Overview of bearingless permanent magnet synchronous motors10.1109/TIE.2012.2232253 ↗
3. Field–circuit model of the radial active magnetic bearing system10.1007/s00202-018-0707-7 ↗
4. Advanced magnetic bearing device for high-speed applications with an I-type electromagnet
5. A passive permanent magnetic bearing with increased axial lift relative to radial stiffness10.1109/TMAG.2020.3042957 ↗
6. Attitude-rate measurement and control integration using magnetically suspended control and sensitive gyroscopes10.1109/TIE.2017.2772161 ↗
7. Multiobjective optimization of a five-phase bearingless permanent magnet motor considering winding area10.1109/TMECH.2021.3121802 ↗
8. Performance improvement of torque and suspension force for a novel five-phase BFSPM machine for flywheel energy storage systems10.1109/TASC.2019.2893295 ↗
9. An overview on electrodynamic bearings10.1109/ACCESS.2022.3176632 ↗
10. Optimum design of integrated magnetic bearing using multiple HTS bulk units10.1109/TASC.2019.2898325 ↗
11. Low noise ZVS switch sharing multichannel switching amplifier for magnetic bearing applications10.1109/TCSII.2019.2940388 ↗
12. Semi-analytical finite element approach for 6-DOF characterizations of PMB load
13. Design and adaptive sliding-mode control of hybrid magnetic bearings10.1109/TIE.2017.2739682 ↗
14. Wajnert, D., and Tomczuk, B. (2022). Two models for time-domain simulation of hybrid magnetic bearing’s characteristics. Sensors, 22.10.3390/s22041567 ↗
15. Wei, N., Qinghai, W., Defei, J., Xiaofeng, H., and Tao, Z. (2012, January 25–27). Study on measuring and control system of AC radial-axial hybrid magnetic bearing used in wind energy generation system. Proceedings of the 31st Chinese Control Conference, Hefei, China.
16. Magnetic field and specific axial load capacity of hybrid magnetic bearing10.1109/TMAG.2013.2248162 ↗
17. Disturbance rejection based on iterative learning control with extended state observer for a four-degree-of-freedom hybrid magnetic bearing system10.1016/j.ymssp.2020.107465 ↗
18. Comprehensive sensitivity and cross-factor variance analysis-based multi-objective design optimization of a 3-DOF hybrid magnetic bearing10.1109/TMAG.2020.3005446 ↗
19. Robust multi-objective optimization of a 3-pole active magnetic bearing based on combined curves with climbing algorithm10.1109/TIE.2021.3088380 ↗
20. A novel 3-DOF axial hybrid magnetic bearing10.1109/TMAG.2010.2074206 ↗
21. Precise control of a four degree-of-freedom permanent magnet biased active magnetic bearing system in a magnetically suspended direct-driven spindle using neural network inverse scheme10.1016/j.ymssp.2016.11.022 ↗
22. Suspension force modeling for a bearingless permanent magnet synchronous motor using Maxwell stress tensor method10.1109/TASC.2016.2599708 ↗
23. Grey wolf optimization algorithm based state feedback control for a bearingless permanent magnet synchronous machine10.1109/TPEL.2020.2994254 ↗
24. HTS magnetic bearings in prototype application10.1109/TASC.2010.2040261 ↗
25. High-performance control for a bearingless permanent magnet synchronous motor using neural network inverse scheme plus internal model controllers10.1109/TIE.2016.2530040 ↗
26. Design optimization of a novel heteropolar radial hybrid magnetic bearing using magnetic circuit method10.1109/TMAG.2017.2749759 ↗
27. A novel homopolar four degrees of freedom hybrid magnetic bearing10.1109/TMAG.2020.3001935 ↗
28. Ye, X., and Le, Q. (2020, January 16–18). Suspension force analysis on novel heteropolar four degrees of freedom hybridmagnetic bearing. Proceedings of the 2020 IEEE International Conference on Applied Superconductivity and Electromagnetic Devices (ASEMD), Tianjin, China.10.1109/ASEMD49065.2020.9276327 ↗
29. Research on a low power consumption six-pole heteropolar hybrid magnetic bearing10.1109/TMAG.2013.2238678 ↗
30. Analytical modeling of permanent magnet biased axial magnetic bearing with multiple air gaps10.1109/TMAG.2014.2330843 ↗
31. Novel heteropolar radial hybrid magnetic bearing with low rotor core loss10.1109/TMAG.2017.2700014 ↗