Research on Seismic Wave Quality Factor of Marble Jointed Rock Mass under SHPB Impact
Source abstract
Abstract
In order to quantitatively describe the energy dissipation law of jointed rock mass, we obtained the jointed cores in laboratory conditions using marble from the roof and floor of Jinchanghe Lead–zinc mine in Baoshan. The dissipative degree of stress wave in marble jointed rock mass is measured by introducing quality factor Qs parameter. Based on the experimental principle of Split Hopkinson Pressure rod loading device (SHPB), we proposed a three-wave energy method of incident wave, reflected wave and projected wave for calculating jointed rock samples’ quality factor Qs based on stress wave energy. Using the SHPB test system for multiple specimens taken from the same piece of rock mass shock compression experiment, the three groups of specimens under different loading conditions gained incident wave and reflected wave and transmission wave experimental data, using the method of stress wave energy to deal with stress wave data, and calculate the joint sample maximum storage energy, dissipation energy and Qs quality factors. The results show that: ① The non-destructive breaking time–history strain of Dali rock mass under impact load is obtained by SHPB dynamic test system; combined with the deformation energy and dissipation energy calculation principle of quality factor, six groups of Qs experimental values are obtained. Although the Qs experimental values are discrete, the overall deviation is small with an average of 43.07. ② AUTODYN-Code was used to simulate the damage and fracture characteristics of rock mass with different quality factors under explosive dynamic load. The results showed that the radius of rock mass compression shear damage area gradually increased with the increase in porosity, but it was not obvious.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Rock Mechanics and Modeling · Structural Response to Dynamic Loads · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Civil and Resource Engineering, University of Science and Technology Beijing, Beijing 100083, China
Yunnan Gold Mining Group Co., Ltd., Kunming 650299, China
BGRIMM Technology Group, Beijing 100160, China
References (31)
Show source-provided references
1. Experimental study on dynamic damage characteristics of roughness joint surface based on SHPB
2. A time-domain recursive method to analyse transient wave propagation across rock joints10.1111/j.1365-246X.2011.05286.x ↗
3. An equivalent 1D dynamic continuum model for rock mass with parallel joints
4. Energy analysis of stress wave propagation across parallel non-linear joints
5. Mechanical behavior of marble exposed to freeze-thaw-fatigue loading10.1016/j.ijrmms.2021.104648 ↗
6. Study on rock mechanics in deep mining engineering
7. Research review of the state key research development program of China: Deep rock mechanics and mining theory
8. Development and new achievements of rock dynamics in China
9. Rock damage control in bedrock blasting excavation for a nuclear power plant10.1016/j.ijrmms.2010.11.016 ↗
10. Response of leptynite subjected to repeated impact loading10.1007/s00603-015-0896-6 ↗
11. Investigation into size and strain rate effects on the strength of rock-like materials10.1016/j.ijrmms.2016.04.008 ↗
12. The role of water content in rate dependence of tensile strength of a fine-grained sandstone10.1007/s43452-022-00379-8 ↗
13. Dynamic Response and Energy Evolution of Sandstone Under Coupled Static–Dynamic Compression: Insights from Experimental Study into Deep Rock Engineering Applications10.1007/s00603-019-01980-9 ↗
14. Time-effect properties and mechanisms of marble failure under different unloading rates
15. Research progress and prospect of deep mining rock mechanics based on coupled static-dynamic loading testing
16. Study on the degradation of hard rock with a pre-existing opening under static-dynamic loadings using nuclear magnetic resonance technique
17. Dynamic characteristics of granite subjected to intermediate loading rate10.1007/s00603-004-0030-7 ↗
18. Mechanical properties of early ages concrete under different impact loading conditions
19. Reference method for determining sample size in SHPB tests of rock materials
20. Preliminary experimental study of characteristics of rock subjected to 3D coupled static and dynamic loads
21. Tests for sandstone mechnical properties and failure model under triaxial SHPB loading
22. Penetration performance of concrete under triaxial stress
23. Dynamic behavior of concrete under static tri-axial loadings
24. Overview of research on the seismic wave quality fac-tor(Q)
25. A new damage-based nonlocal model for dynamic tensile failure of concrete material10.1016/j.ijimpeng.2019.103336 ↗
26. Inverse characterization of UHPC material based on Hopkinson bar test
27. Strain-rate effect of polymers and correction methodology in a SHPB test10.1016/j.ijimpeng.2021.104109 ↗
28. Investigation of the spatial distribution pattern of 3D microcracks in single-cracked breakage10.1016/j.ijrmms.2022.105126 ↗
29. Experimental investigation on the spatio-temporal-energy evolution pattern of limestone fracture using acoustic emission monitoring10.1016/j.jappgeo.2022.104787 ↗
30. Rockburst mechanism in coal rock with structural surface and the microseismic (MS) and electromagnetic radiation (EMR) response10.1016/j.engfailanal.2021.105396 ↗
31. Cracking mechanism and strength criteria evaluation of granite affected by intermediate principal stresses subjected to unloading stress state10.1016/j.ijrmms.2021.104783 ↗