A Novel Coordinated Control Strategy for Parallel Hybrid Electric Vehicles during Clutch Slipping Process
Source abstract
Abstract
For parallel hybrid electric vehicles (HEVs), the clutch serves as a vital enabling actuator element during mode transitions. The expected drivability and smoothness of parallel HEVs are difficult to be achieve owing to the neglect of clutch-torque-induced disturbance and different response characteristics of power sources during clutch slipping. To address this issue, this paper proposes a novel control strategy to coordinate the engine and motor during the clutch slipping process. A sliding mode control strategy based on a group-preserving scheme was applied to control the motor. The vehicle dynamic equation was constructed by the sliding surface with the Lagrange function. The equation solutions obtained by introducing the Runge–Kutta method were used as motor control inputs. Meanwhile, an adaptive PI controller was designed to regulate engine speed for the reduction in the speed difference of the clutch. The hardware-in-the-loop simulations were conducted to validate the outstanding performance of the proposal strategy. The verification results indicate that the proposed strategy not only reduces the vehicle jerk and frictional losses effectively, but also improves vehicle driving comfort and reliability.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electric and Hybrid Vehicle Technologies · Vehicle Dynamics and Control Systems · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Jiangsu Key Laboratory of Traffic and Transportation Security, Huaiyin Institute of Technology, Huaian 223003, China
Automotive Engineering Research Institute, Jiangsu University, Zhenjiang 212013, China
School of Automotive and Traffic Engineering, Jiangsu University, Zhenjiang 212013, China
Funding
Foundation for the Jiangsu Key Laboratory of Traffic and Transportation Security · project of Jiangsu province Six Talent Peaks · Key R & D projects of Huai’an
References (49)
Show source-provided references
1. Agamloh, E., Von Jouanne, A., and Yokochi, A. (2020). An Overview of Electric Machine Trends in Modern Electric Vehicles. Machines, 8.10.3390/machines8020020 ↗
2. Tian, X., Cai, Y., Sun, X., Zhu, Z., and Xu, Y. (2022). A Novel Energy Management Strategy for Plug-in Hybrid Electric Buses Based on Model Predictive Control and Estimation of Distribution Algorithm. IEEE/ASME Trans. Mechatron., 1–12.10.1109/TMECH.2022.3156150 ↗
3. Parameter identification in a permanent magnet three-phasesynchronous motor of a city bus for an intelligent drive assistant10.1504/IJMIC.2014.062022 ↗
4. Wang, Z., Cai, Y., Zeng, Y., and Yu, J. (2019). Multi-objective optimization for plug-in 4WD hybrid electric vehicle powertrain. Appl. Sci., 9.10.3390/app9194068 ↗
5. Morales-Morales, J., Rivera-Cruz, M.A., Cruz-Alcantar, P., Santos, H.B., Cervantes-Camacho, I., and Herrera, V.A.R. (2020). Performance Analysis of a Hybrid Electric Vehicle with Multiple Converter Configuration. Appl. Sci., 10.10.3390/app10031074 ↗
6. Battery State-of-Health Perceptive Energy Management for Hybrid Electric Vehicles10.1109/TVT.2012.2203836 ↗
7. A novel simplified model for torsional vibration analysis of a series-parallel hybrid electric vehicle10.1016/j.ymssp.2016.08.020 ↗
8. Convex Optimization for the Energy Management of Hybrid Electric Vehicles Considering Engine Start and Gearshift Costs10.3390/en7020834 ↗
9. Multiobjective Design Optimization of an IPMSM for EVs Based on Fuzzy Method and Sequential Taguchi Method10.1109/TIE.2020.3031534 ↗
10. Koprubasi, K., Westervelt, E.R., and Rizzoni, G. (2007, January 9–13). Toward the Systematic Design of Controllers for Smooth Hybrid Electric Vehicle Mode Changes. Proceedings of the 2007 American Control Conference, New York, NY, USA.10.1109/ACC.2007.4282591 ↗
11. Torque Coordination Control During Mode Transition for a Series–Parallel Hybrid Electric Vehicle10.1109/TVT.2012.2200305 ↗
12. Drivability improvements for a single-motor parallel hybrid electric vehicle using robust controls10.1631/jzus.A1300356 ↗
13. Mode Transition Control Using Disturbance Compensation for a Parallel Hybrid Electric Vehicle10.1243/09544070JAUTO1523 ↗
14. A robust H∞ control-based hierarchical mode transition control system for plug-in hybrid electric vehicle10.1016/j.ymssp.2017.06.023 ↗
15. Predictive-model-based dynamic coordination control strategy for power-split hybrid electric bus10.1016/j.ymssp.2014.12.016 ↗
16. Modular Kinematic Modelling of Articulated Buses10.1109/TVT.2020.2999639 ↗
17. Finite Position Control of Interior Permanent Magnet Synchronous Motors at Low Speed10.1109/TPEL.2022.3146841 ↗
18. Development of Progressive Fuzzy Logic and ANFIS Control for Energy Management of Plug-In Hybrid Electric Vehicle10.1109/ACCESS.2021.3073862 ↗
19. An ANFIS-Based ECMS for Energy Optimization of Parallel Hybrid Electric Bus10.1109/TVT.2019.2960593 ↗
20. Event-Based Anomaly Detection Using a One-Class SVM for a Hybrid Electric Vehicle10.1109/TVT.2022.3165526 ↗
21. Driving-Cycle-Oriented Design Optimization of a Permanent Magnet Hub Motor Drive System for a Four-Wheel-Drive Electric Vehicle10.1109/TTE.2020.3009396 ↗
22. Real-Time SIL Validation of a Novel PMSM Control Based on Deep Deterministic Policy Gradient Scheme for Electrified Vehicles10.1109/TPEL.2022.3153845 ↗
23. Hardware-in-the-loop simulation for the design and verification of the control system of a series–parallel hybrid electric city-bus10.1016/j.simpat.2012.02.010 ↗
24. Motor control algorithm for an optimal engine operation of power split hybrid electric vehicle10.1007/s12239-015-0011-8 ↗
25. A Composite Sliding Mode Control for SPMSM Drives Based on a New Hybrid Reaching Law With Disturbance Compensation10.1109/TTE.2021.3052986 ↗
26. A Comparative Analysis of Energy Management Strategies for Hybrid Electric Vehicles10.1115/1.4003267 ↗
27. An Improved Deadbeat Predictive Stator Flux Control with Reduced-Order Disturbance Observer for In-Wheel PMSMs10.1109/TMECH.2021.3068973 ↗
28. Power Sharing Control Algorithm for Direct Integration of Fuel Cells in a Dual-Inverter Electric Vehicle Drivetrain10.1109/TTE.2022.3143092 ↗
29. Robust control of uncertain semi-Markovian jump systems using sliding mode control method
30. Sliding Mode Direct Torque Control of SPMSMs Based on a Hybrid Wolf Optimization Algorithm10.1109/TIE.2021.3080220 ↗
31. Unified Mode-Based Description of Arbitrary Hybrid and Electric Powertrain Topologies10.1109/TVT.2021.3133790 ↗
32. An adaptive ECMS with driving style recognition for energy optimization of parallel hybrid electric buses10.1016/j.energy.2019.116151 ↗
33. Cone of non-linear dynamical system and group preserving schemes10.1016/S0020-7462(00)00069-X ↗
34. Modified group preserving methods and applications in chaotic systems
35. Runge-Kutta methods in optimal control and the transformed adjoint system10.1007/s002110000178 ↗
36. Nonlinear Analysis and Intelligent Control of Integrated Vehicle Dynamics
37. Energy Management Design in Hybrid Electric Vehicles: A Novel Optimality and Stability Framework10.1109/TCST.2014.2363617 ↗
38. Tian, X., Cai, Y., Sun, X., Zhu, Z., Wang, Y., and Xu, Y. (2022). Incorporating Driving Style Recognition into MPC for Energy management of Plug-in Hybrid Electric Buses. IEEE Trans. Transp. Electrif., 1.10.1109/TTE.2022.3181201 ↗
39. Impact of energy management strategies on hydrogen consumption and start-up/shut-down cycles in fuel cell-ultracapacitor-battery vehicles10.1109/TVT.2021.3127582 ↗
40. A Novel Torque Coordination Control Strategy of a Single-Shaft Parallel Hybrid Electric Vehicle Based on Model Predictive Control
41. Laurén, M., Goswami, G., Tupitsina, A., Jaiswal, S., Lindh, T., and Sopanen, J. (2021). General-Purpose and Scalable Internal-Combustion Engine Model for Energy-Efficiency Studies. Machines, 10.10.3390/machines10010026 ↗
42. Sun, X., Li, T., Yao, M., Lei, G., Guo, Y., and Zhu, J. (2021). Improved Finite-Control-Set Model Predictive Control with Virtual Vectors for PMSHM Drives. IEEE Trans. Energy Convers., 1.10.1109/TEC.2021.3138905 ↗
43. A multi input sliding mode control for peltier cells using a cold-warm sliding surface10.1016/j.jfranklin.2017.10.033 ↗
44. A Robust Deadbeat Predictive Controller With Delay Compensation Based on Composite Sliding-Mode Observer for PMSMs10.1109/TPEL.2021.3063226 ↗
45. Muna, Y.B., and Kuo, C.-C. (2022). Feasibility and Techno-Economic Analysis of Electric Vehicle Charging of PV/Wind/Diesel/Battery Hybrid Energy System with Different Battery Technology. Energies, 15.10.3390/en15124364 ↗
46. Speed Sensorless Model Predictive Current Control Based on Finite Position Set for PMSHM Drives10.1109/TTE.2021.3081436 ↗
47. Threshold-changing control strategy for series hybrid electric vehicles10.1016/j.apenergy.2018.11.003 ↗
48. Adaptive real-time energy management control strategy based on fuzzy inference system for plug-in hybrid electric vehicles10.1016/j.conengprac.2020.104703 ↗
49. Torque control of engine clutch to improve the driving quality of hybrid electric vehicles10.1007/s12239-011-0088-7 ↗