journal article·2021-11-12Open access

GoZone: A Numerical Model for Travelling Fires Based on Cellular Automata Concept

Antonio Gamba, Jean-Marc Franssen

Applied Sciences· Volume 11· Issue 22

Abstract

Fires in large compartments tend to burn locally and to move across the floor over a period of time; this particular behaviour has been discovered to challenge the assumption of uniform gas temperature in the fire compartment. Recent studies on fires in large compartments have led to the now widely known concept of “travelling fires”. Several models have been proposed to describe the evolution in time of travelling fires. Although these models represented an innovative step in the field of travelling fires, the major drawbacks of these models can be found in the simplification of fire dynamics (constant spread rate, 1D imposed fire path) and limited field of application (rectangular based geometries). The purpose of this paper is to present a numerical model of travelling fire. The model was based on an improved zone model combined with a cellular automata model. The software GoZone, in which the model was implemented, is intended to be a practical solution to analyse fires in large compartments of potentially any shape. GoZone is aimed to describe the complex dynamics of the fire from ignition to a phase of growing localised fire that may eventually travel in the compartment, possibly followed by a flashover. The main sub models comprising GoZone are presented. A comparison is given with the results of under ventilated fire test 2 of the BST/FSR 1993 test series and with respect to the Veselì travelling fire test is shown. GoZone shows a promising capacity to represent fires in a large compartment in both air and fuel controlled fire conditions.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Evacuation and Crowd Dynamics · Fire dynamics and safety research · Modern American Literature Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

UEE Department, Liege University, 4000 Liege, Belgium

References (59)

Show source-provided references
1. Kawagoe, K. (1958). Fire Behavior in Rooms. Report 27, Building Research Institute, Ministry of Construction.
2. Thomas, P.H., Heselden, A.J., and Law, M. (1967). Fully Developed Compartment Fires—Two Kinds of Behaviour, H.M. Stationery Office. Fire Research Technical Paper No. 18.
3. A new look at compartment fires, part I10.1007/BF02590544 ↗
4. A new look at compartment fires, part II10.1007/BF02590537 ↗
5. The natural fire safety concept—Full-scale tests at Cardington10.1016/S0379-7112(03)00028-6 ↗
6. Travelling fires for structural design—Part I: Literature review10.1016/j.firesaf.2012.06.003 ↗
7. SAFIR: A thermal/structural program for modeling structures under fire10.62913/engj.v42i3.856 ↗
8. Nakasone, Y., Yoshimoto, S., and Stolarski, T. (2021, November 06). Engineering Analysis with ANSYS Software. Available online: http://gr.xjtu.edu.cn/c/document_library/get_file?folderId=2529162&name=DLFE-126684.pdf.
9. A tool to design steel elements submitted to compartment fires—OZone V2. Part 2: Methodology and application10.1016/S0379-7112(03)00015-8 ↗
10. Peacock, R.D., Reneke, P.A., and Forney, G.P. (2015). CFAST—Consolidated Model of Fire Growth and Smoke Transport. (Version 7) Volume 1: Technical Reference Guide, National Institute of Standards and Technology.10.6028/NIST.TN.1889v1 ↗
11. Engineering relations for fire plumes10.1016/0379-7112(84)90005-5 ↗
12. Experimental and Numerical Study on The Behaviour Of A Steel Beam under Ceiling Exposed To A Localized Fire10.3801/IAFSS.FSS.5-1153 ↗
13. Analysis of experimental hydrocarbon localised fires with and without engulfed steel members10.1016/j.firesaf.2017.05.011 ↗
14. Development of an analytical model to predict the radiative heat flux to a vertical element due to a localised fire10.1016/j.firesaf.2019.03.001 ↗
15. McGrattan, K., Mcdermott, R., Hostikka, S., and Floyd, J. (2010). Fire Dynamics Simulator (Version 5) User’s Guide, NIST Special Publication.
16. Clifton, G. (1996). Fire Models for Large Firecells, HERA. HERA Rep. R4-83 C.
17. Wang, Y., Burgess, I., Wald, F., and Gillie, M. (2012). Performance-Based Fire Engineering of Structures, CRC Press.10.1201/b12076 ↗
18. Rein, G., Zhang, X., Williams, P., Hume, B., and Heise, A. (2007). Multi-Storey Fire Analysis for High-Rise Buildings, 11th Interflam, Interflam.
19. Rackauskaite, E., Hamel, C., and Rein, G. (2016). Improved Travelling Fires Methodology—iTFM. Appl. Struct. Fire Eng.10.14311/asfe.2015.063 ↗
20. A critical review of “travelling fire” scenarios for performance-based structural engineering10.1016/j.firesaf.2017.04.001 ↗
21. Natural Fires in Large Scale Compartments
22. Dai, X., Welch, S., Rush, D., Charlier, M., and Anderson, J. (2019, January 1–3). Characterising natural fires in large compartments—Revisiting an early travelling fire test (BST/FRS 1993) with CFD. Proceedings of the 15th International Interflam Conference, London, UK.
23. Jeffress, L.A. (1951). The General and Logical Theory of Automata. Cerebral Mechanisms in Behavior: The Hixon Symposium, John Wiley & Sons.
24. Statistical mechanics of cellular automata10.1103/RevModPhys.55.601 ↗
25. A Cellular Automata model for fire spreading prediction
26. Simulating fire patterns in heterogeneous landscapes10.1016/S0304-3800(00)00368-9 ↗
27. A cellular automaton model of wildfire propagation and extinction
28. Gmsh: A Three-Dimensional Finite Element Mesh Generator with Built-in Pre- and Post-Processing10.1002/nme.2579 ↗
29. On the Behavior of Sound and Decayed Wood at High Temperatures10.2307/25129876 ↗
30. Brown, C.R. (1934). The Determination of the Ignition Temperatures of Solid Materials, University of Michigan. Available online: https://books.google.be/books/about/The_Determination_of_the_Ignition_Temper.html?id=UU3PAAAAMAAJ&redir_esc=y.
31. Browne, F. (1958). Ignition and Charring Temperautres of Wood, Forest Products Laboratory, Forest Service, U. S. Department of Agriculture. Report, No.1464.
32. Surface temperature at ignition of wooden based slabs10.1016/S0379-7112(96)00046-X ↗
33. Shoub, H., and Bender, E.W. (1964). Radiant Ignition of Wall Finish Materials in a Small Home, U. S. Department of Commerce National Bureau of Standards.10.6028/NBS.RPT.8172 ↗
34. Ignition of Wood: A Review of the State of the Art10.1177/10423910260620482 ↗
35. ISO ignitability test and proposed criteria10.1002/fam.810110406 ↗
36. Ignitability Comparisons between the ISO Ignitability Test and the Cone Calorimeter10.1177/073490419100900403 ↗
37. A protocol for analysis of time-to-ignition data from bench scale tests10.1016/0379-7112(95)00003-C ↗
38. Evaluating ignition data using the flux time product10.1002/fam.810180407 ↗
39. Janssens, M. (2006). A thermal model for piloted ignition of wood including variable thermophysical properties. Fire Safety Science—Proceedings of the Third International Symposium, International Association for Fire Safety Science.
40. Time to ignition, heat release rate and fire endurance time of wood in cone calorimeter test10.1002/fam.766 ↗
41. A model for the prediction of the thermal degradation and ignition of wood under constant and variable heat flux10.1016/S0165-2370(00)00214-X ↗
42. An Integral Model for Wood Auto-ignition under Variable Heat Flux10.1177/0734904106062138 ↗
43. Welch, S., and Marshall, N.R. (2004). Development and validation of a comprehensive model for flame spread and toxic products in full-scale scenarios. 4th International Seminar on Fire and Explosion Hazards, University of Edinburgh.
44. Propagation tests with uniformly distributed cellulosic fire load10.1016/j.firesaf.2020.103213 ↗
45. CEN—European Committee for Standardization (2004). EN 1995-1-2:2004, Eurocode 5–Design of Timber Structures Part 1–2: General–Structural fire Design, CEN—European Committee for Standardization.
46. Predicting the piloted ignition of wood in the cone calorimeter using an integral model—Effect of species, grain orientation and heat flux10.1016/S0379-7112(00)00055-2 ↗
47. CEN—European Committee for Standardization (2002). EN 1991-1-2, Eurocode 1: Actions on Structures—Part 1–2: General Actions—Actions on Structures Exposed to Fire, CEN—European Committee for Standardization.
48. Karlsson, B., and Quintiere, J. (1999). Enclosure Fire Dynamics, CRC Press:.10.1201/9781420050219 ↗
49. An extended travelling fire method framework for performance-based structural design10.1002/fam.2810 ↗
50. Lautenberger, C., Tien, C.L., Lee, K.Y., and Stretton, A.J. (2016). Radiation Heat Transfer. SFPE Handbook Fire Protection Engineering, Springer. [5th ed.].10.1007/978-1-4939-2565-0_4 ↗
51. Thermal radiation from pool fires10.1016/0010-2180(77)90106-7 ↗
52. Drysdale, D. (2011). An Introduction to Fire Dynamics, Wiley. [2nd ed.].10.1002/9781119975465 ↗
53. Casal, J. (2017). Evaluation of the Effects and Consequences of Major Accidents in Industrial Plants, Elsevier. [2nd ed.].10.1016/B978-0-444-63883-0.00003-4 ↗
54. Fleury, R. (2011). Evaluation of Thermal Radiation Models for Fire Spread between Objects. [Ph.D. Thesis, University of Canterbury].
55. Flame Heights of Fuel Arrays with Combustion in Depth10.3801/IAFSS.FSS.5-427 ↗
56. A nonlocal model with strain-based damage10.1016/j.ijsolstr.2009.08.009 ↗
57. A tool to design steel elements submitted to compartment fires—OZone V2. Part 1: Pre- and post-flashover compartment fire model10.1016/S0379-7112(03)00014-6 ↗
58. Horová, K., Wald, F., and Bouchair, A. (2013). Travelling Fire in Full-Scale Experimental Building. Design Fabr. Econ. Metal. Struct., 371–376.10.1007/978-3-642-36691-8_56 ↗
59. Temperature heterogeneity during travelling fire on experimental building10.1016/j.advengsoft.2013.05.001 ↗