Adhesive system properties and its behavior under simulated pulpal pressure in sound and caries-affected dentin and aging
Source abstract
Abstract
This study aimed to evaluate the bond strength (BS) and adhesive interface characteristics of sound (SD) and caries-affected dentin (CAD) in the presence of simulated pulpal pressure (SPP) and after aging in solvents. The study also evaluated the physical and mechanical properties of the adhesive system under solvent challenge. Seventy-two SD and 36 natural CAD human molars were used. Thirty-six sound molars were submitted to artificial formation of caries by pH cycling (artificial CAD). Chemical analysis was performed in FTIR, and the surface microhardness (KHN) was measured. All specimens had SPP (20 cm H20) and were etched with 37% phosphoric acid, and an adhesive system (Scotchbond Universal, 3 M ESPE) and composite resin block was applied. Tooth-resin sticks were randomly divided into groups according to storage time (24 h and 30 days) and solvents: deionized water (W), 99% ethanol (E) and methyl ethyl ketone (MEK). The specimens were submitted to BS testing (0.5 mm/min; 10 kgf), and the adhesive interface was evaluated by SEM. After aging in solvents, the adhesive samples were evaluated using flexural strength (FS), modulus of elasticity (ME), sorption (SR), and solubility (SL). Chemical differences in dentin were observed through mineral content loss in N-CAD and A-CAD were observed in FTIR analysis. N-CAD showed the lowest mean KHN. Dentin, time, interaction dentin-time, and interaction dentin-time-solvent (p = 0.003 < 0.05) had a statistically significant effect on BS values. The characteristics of the adhesive interface differ among substrates and aging solvents on SEM. Ethanol differed significantly after 30 days with the lowest means values in the analysis of FS, ME, SR, SL. Natural caries-affected dentin, ethanol aging solvent and 30 days of storage time showed to be the most aggressive factors in terms of reducing bond strength, negatively interfering with the quality of the adhesive interface under simulated pulpal pressure. The properties of the adhesive system were more compromised with aging in ethanol.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dental materials and restorations · Endodontics and Root Canal Treatments · Dental Erosion and Treatment
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Universal dental adhesives: current status, laboratory testing, and clinical performance10.1002/jbm.b.34305 ↗
2. Pathophysiology of dental caries10.1159/000487826 ↗
3. Dentin bonding-Variables related to the clinical situation and the substrate treatment10.1016/j.dental.2009.11.149 ↗
4. Universal adhesive: the effect of different simulated pulpal pressure fluids and bonding modes to dentin10.1007/s10266-021-00633-0 ↗
5. Current perspectives on dental adhesion: (1) Dentin adhesion – not there yet10.1016/j.jdsr.2020.08.004 ↗
6. Obtaining artificially caries-affected dentin for in vitro studies
7. From buonocore ’ s pioneering acid-etch technique to self-adhering restoratives . A status perspective of
8. Effect of chlorhexidine pretreatment on bond strength durability of caries–affected dentin over 2-year aging in artificial saliva and under simulated intrapulpal pressure10.2341/11-018-L ↗
9. Bond durability of different resin cements to caries-affected dentin under simulated intrapulpal pressure10.2341/14-035-L ↗
10. Viscoelastic stability of resin-composites aged in food-simulating solvents10.1016/j.dental.2013.07.009 ↗
11. Effect of immersion in various media on the sorption, solubility, elution of unreacted monomers, and flexural properties of two model dental composite compositions10.1007/s10856-008-3369-6 ↗
12. Susceptibility of contemporary single-bottle self-etch dentine adhesives to intrinsic water permeation10.1016/j.jdent.2017.08.010 ↗
13. Resin adhesion to caries-affected dentine after different removal methods10.1111/j.1834-7819.2006.tb00421.x ↗
14. Influence of intrapulpal pressure simulation on the bond strength of adhesive systems to dentin10.1590/S1806-83242008000200013 ↗
15. Bond strength of different adhesives to normal and caries-affected dentins
16. Nanoindentation hardness of intertubular dentin in sound, demineralized and natural caries-affected dentin10.1016/j.jmbbm.2013.12.017 ↗
17. Dentin treatment with MMPs inhibitors does not alter bond strengths to caries-affected dentin10.1016/j.jdent.2008.09.002 ↗
18. In vitro ??TBS of one-bottle adhesive systems: sound versus artificially-created caries-affected dentin10.1002/jbm.b.31004 ↗
19. A biofilm cariogenic challenge model for dentin demineralization and dentin bonding analysis10.1007/s00784-014-1331-1 ↗
20. Influence of Nd:YAG laser on intrapulpal temperature and bond strength of human dentin under simulated pulpal pressure10.1007/s10103-015-1827-1 ↗
21. Hydrolytic degradation of the resin-dentine interface induced by the simulated pulpal pressure, direct and indirect water ageing10.1016/j.jdent.2012.09.011 ↗
22. Effect of simulated pulpal pressure on dentin permeability and adhesion of self-etch adhesives10.1016/j.dental.2006.06.010 ↗
23. Viscoelastic stability of resin-composites aged in food-simulating solvents10.1016/j.dental.2013.07.009 ↗
24. Influence of Nd:YAG laser on the bond strength of self-etching and conventional adhesive systems to dental hard tissues10.2341/11-383-L ↗
25. Longitudinal evaluation of bond strength to enamel of dental adhesive systems associated with Nd:YAG laser10.2341/13-181-L ↗
26. Influence of de/remineralization of enamel on the tensile bond strength of etch-and-rinse and self-etching adhesives
27. Influence of chlorhexidine on longitudinal bond strength to dentin: in vitro study10.14295/bds.2017.v20i1.1315 ↗
28. Collagen degradation by host-derived enzymes during aging10.1177/154405910408300306 ↗
29. Enzymatic biodegradation of HEMA/bisGMA adhesives formulated with different water content10.1002/jbm.b.31095 ↗
30. Effect of photoinitiator system and water content on dynamic mechanical properties of a light-cured bisGMA/HEMA dental resin10.1002/jbm.a.32617 ↗
31. Effect of chlorhexidine pretreatment on bond strength durability of caries–affected dentin over 2-year aging in artificial saliva and under simulated intrapulpal pressure10.2341/11-018-L ↗
32. Permeation of intrinsic water into ethanol- and water-saturated, monomer-infiltrated dentin bond interfaces10.1016/j.dental.2015.08.159 ↗
33. Cysteine cathepsins in human carious dentin10.1177/0022034510391906 ↗
34. Cysteine cathepsins in human dentin-pulp complex10.1016/j.joen.2009.12.034 ↗
35. Abundance of MMPs and cysteine cathepsins in caries-affected dentin10.1177/0022034513516979 ↗
36. Mechanisms of degradation of the hybrid layer in adhesive dentistry and therapeutic agents to improve bond durability - a literature review10.1016/j.dental.2015.11.007 ↗
37. Mineral density, morphology and bond strength of natural versus artificial caries-affected dentin10.4012/dmj.2012-243 ↗
38. Chemical profile of adhesive/caries-affected dentin interfaces using Raman microspectroscopy10.1002/jbm.a.30981 ↗
39. Water content and apparent stiffness of non-caries versus caries-affected human dentin10.1002/jbm.b.30130 ↗
40. Dentin bonding: can we make it last?10.2341/14-095-BL ↗
41. Differentiation of two layers of carious dentin by staining10.1177/00220345720510032601 ↗
42. Is it possible to induce artificial caries-affected dentin using the same protocol to primary and permanent teeth?10.5005/jp-journals-10024-1734 ↗
43. Artificial methods of dentine caries induction: a hardness and morphological comparative study10.1016/j.archoralbio.2009.09.007 ↗
44. Bonding of self-etch and total-etch adhesives to carious dentin10.1177/154405910208100811 ↗
45. Bond strength of adhesive luting agents to caries-affected dentin10.2341/13-062-L ↗
46. Evaluation of microtensile bond strength of self-etching adhesives on normal and caries-affected dentin10.4012/dmj.2014-330 ↗
47. Microtensile bond strength of total-etch and self-etching adhesives to caries-affected dentine10.1016/S0300-5712(03)00088-5 ↗
48. Influence of dentin thickness on intrapulpal temperature under simulated pulpal pressure during Nd:YAG laser irradiation10.1007/s10103-016-2098-1 ↗
49. Meta-analytical review of parameters involved in dentin bonding10.1177/0022034511431251 ↗
50. How much do resin-based dental materials release? A meta-analytical approach10.1016/j.dental.2011.05.001 ↗
51. Mechanical stability of resin-dentin bond components10.1016/j.dental.2004.06.001 ↗
52. Alternative aging solutions to accelerate resin-dentin bond degradation
53. Effects of immersion time and frequency of water exchange on durability of etch-and-rinse adhesive10.1002/jbm.b.31718 ↗
54. Four-year water degradation of a total-etch and two self-etching adhesives bonded to dentin10.1016/j.jdent.2008.04.011 ↗
55. In vitro degradation of resin-dentin bonds analyzed by microtensile bond test, scanning and transmission electron microscopy10.1016/S0142-9612(03)00262-X ↗
56. Adhesive performance of a multi-mode adhesive system: 1-Year in vitro study10.1016/j.jdent.2013.12.008 ↗
57. Comparison of intra- and intertooth resin-dentin bond strength variability
58. Durability of resin-dentin bonds: effects of direct/indirect exposure and storage media10.1016/j.dental.2006.06.030 ↗
59. The microtensile bond test: a review
60. Polymerization- and solvent-induced phase separation in hydrophilic-rich dentin adhesive mimic10.1016/j.actbio.2014.03.001 ↗
61. Adhesive/dentin interface: the weak link in the composite restoration10.1007/s10439-010-9969-6 ↗
62. Water sorption and dynamic mechanical properties of dentin adhesives with a urethane-based multifunctional methacrylate monomer10.1016/j.dental.2009.07.010 ↗
63. Dynamic and static moduli of elasticity of resin-based materials10.1016/S0109-5641(01)00021-5 ↗
64. Mechanical properties of methacrylate-based model dentin adhesives: effect of loading rate and moisture exposure10.1002/jbm.b.32963 ↗
65. Comparative physico-mechanical characterization of new hybrid restorative materials with conventional glass-ionomer and resin composite restorative materials10.1177/00220345970760041001 ↗
66. Water sorption and solubility of core build-up materials10.1016/j.dental.2014.08.374 ↗
67. Effect of food and oral simulating fluids on dentine bond and composite strength10.1016/0300-5712(94)90088-4 ↗
68. Effect of immersion in various media on the sorption, solubility, elution of unreacted monomers, and flexural properties of two model dental composite compositions10.1007/s10856-008-3369-6 ↗