Multiobjective Optimization Design for a MR Damper Based on EBFNN and MOPSO
Source abstract
Abstract
The structural parameters of the magnetorheological (MR) damper significantly affect the output damping force and dynamic range. This paper presents a design optimization method to improve the damping performance of a novel MR damper with a bended magnetic circuit and folded flow gap. The multiobjective optimization of the structural parameters of this MR damper was carried out based on the optimal Latin hypercube design (Opt LHD), ellipsoidal basis function neural network (EBFNN), and multiobjective particle swarm optimization (MOPSO). By using the Opt LHD and EBFNN, determination of the optimization variables on the structural parameters was conducted, and a prediction model was proposed for further optimization. Then, the MOPSO algorithm was adopted to obtain the optimal structure of the MR damper. The simulation and experimental results demonstrate that the damping performance indicators of the optimal MR damper were greatly improved. The simulation results show that the damping force increased from 4585 to 6917 N, and the gain was optimized by 50.8%. The dynamic range increased from 12.4 to 13.2, which was optimized by 6.4%. The experimental results show that the damping force and dynamic range of the optimal MR damper were increased to 7247 N and 13.8, respectively.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Vibration Control and Rheological Fluids · Hydraulic and Pneumatic Systems · Structural Health Monitoring Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Key Laboratory of Conveyance and Equipment, Ministry of Education, East China Jiaotong University, Nanchang 330013, China
Funding
National Natural Science Foundation of China · Natural Science Foundation of Jiangxi Province of China
References (32)
Show source-provided references
1. Response time of magnetorheological fluid-based haptic device10.1177/1045389X15596621 ↗
2. A review on structural configurations of magnetorheological fluid based devices reported in 2018–202010.3389/fmats.2021.640102 ↗
3. Experimental attenuation and evaluation of whole body vibration for an off-road vehicle with magnetorheological dampers10.1177/1461348418782166 ↗
4. A semi-active suspension using a magnetorheological damper with nonlinear negative-stiffness component10.1016/j.ymssp.2020.107071 ↗
5. A semi-active control technique through mr fluid dampers for seismic protection of single-story rc precast buildings10.3390/ma15030759 ↗
6. Dynamic modelling and control of shear-mode rotational mr damper for mitigating hazard vibration of building structures10.1088/1361-665X/abb573 ↗
7. Robotic ankle-foot orthosis with a variable viscosity link using mr fluid10.1109/TMECH.2019.2894406 ↗
8. Medical applications of magnetorheological fluid: A systematic review10.1088/1361-665X/ac54e7 ↗
9. Multi-objective optimal design and performance of magnetorheological damper10.1002/mawe.202000175 ↗
10. Design and optimization of shear mode mr damper using grg and gra methods: Experimental validation10.1007/s12046-021-01746-6 ↗
11. Multi-objective optimization design for a magnetorheological damper10.1177/1045389X211006907 ↗
12. Evaluation of optimal parameters of mr fluids for damper application using particle swarm and response surface optimisation10.1007/s40430-017-0875-9 ↗
13. Optimization and performance analysis of magnetorheological fluid damper considering different piston configurations10.1177/1045389X19828526 ↗
14. Marathe, A.P., Khot, S.M., and Nagler, J. (2022). Development of low-cost optimal magneto-rheological damper for automotive application. J. Vib. Eng. Technol.10.1007/s42417-022-00486-z ↗
15. Design optimization of a bi-fold mr energy absorber subjected to impact loading for skid landing gear applications10.1088/1361-665X/aadb33 ↗
16. Design and multiobjective optimization of magnetorheological damper considering the consistency of magnetic flux density
17. A comprehensive optimal design method for magnetorheological dampers utilized in dmu power package
18. Shape optimization of magnetorheological damper piston based on parametric curve for damping force augmentation10.1088/1361-665X/ac3b1d ↗
19. A comprehensive approach for optimal design of magnetorheological dampers10.1177/1045389X18798947 ↗
20. Design optimization of magnetorheological damper geometry using response surface method for achieving maximum yield stress10.1007/s12206-019-0828-6 ↗
21. Design and geometric parameter optimization of hybrid magnetorheological fluid damper10.1007/s12206-020-0627-0 ↗
22. Optimal design of mr shock absorber and application to vehicle suspension10.1088/0964-1726/18/3/035012 ↗
23. A comprehensive study on the optimal design of magnetorheological dampers for improved damping capacity and dynamical adjustability10.3390/act10030064 ↗
24. Multi-objective optimization for limiting tunnel-induced damages considering uncertainties10.1016/j.ress.2021.107945 ↗
25. Analysis on parameter optimization of dampers of long-span double-tower cable-stayed bridges10.1080/15732479.2019.1703760 ↗
26. Optimization and testing of a new prototype hybrid MR brake with arc form surface as a prosthetic knee10.1109/TMECH.2018.2820065 ↗
27. Nasir, A.N.K., Azwan, A.R.A., Ashraf, A.M., and Falfazli, M.J.M. (2017, January 4–5). A multi-objective Spiral Dynamic algorithm and its application for PD design. Proceedings of the 2017 IEEE 8th Control and System Graduate Research Colloquium (ICSGRC), Shah Alam, Malaysia.10.1109/ICSGRC.2017.8070557 ↗
28. A modified particle swarm optimization for multimodal multi-objective optimization10.1016/j.engappai.2020.103905 ↗
29. Optimal design of a magnetorheological damper used in smart prosthetic knees10.1088/1361-665X/aa5494 ↗
30. Multi-objective optimization of magneto-rheological mount structure based on vehicle vibration control10.1177/1045389X20975498 ↗
31. Performance analysis of magnetorheological damper with folded resistance gaps and bending magnetic circuit10.3390/act11060165 ↗
32. Damping performance analysis of magnetorheological damper based on multiphysics coupling10.3390/act10080176 ↗