On the Influence of Direction-Dependent Behavior of Rock Mass in Simulations of Deep Tunneling Using a Novel Gradient-Enhanced Transversely Isotropic Damage–Plasticity Model
Source abstract
Abstract
In engineering practice, numerical simulations of deep tunneling are commonly based on isotropic linear–elastic perfectly plastic rock models. Rock, however, commonly exhibits highly nonlinear and distinct direction-dependent mechanical behavior. The former is characterized by irreversible deformation, associated with strain hardening and strain softening, and the degradation of stiffness; the latter is due to the inherent rock structure. Nevertheless, the majority of the existing rock models focuses on the prediction of either the highly nonlinear material behavior or the inherent anisotropic response of rock. The combined effects of nonlinear and direction-dependent rock behavior, particularly in the context of the numerical simulations of tunnel excavation, have rarely been taken into account so far. Thus, it is the aim of the present contribution to demonstrate the influence of both effects on the evolution of the deformation and stress distribution in the rock mass due to deep tunnel excavation on the example of a well-monitored stretch of the Brenner Base Tunnel (BBT). To this end, the recently proposed gradient-enhanced transversely isotropic rock damage–plasticity (TI-RDP) model, is employed for modeling the surrounding rock mass consisting of Innsbruck quartz-phyllite. The material parameters for the nonlinear transversely isotropic rock model are identified by means of three-dimensional finite element simulations of triaxial tests on specimens of Innsbruck quartz-phyllite, conducted for varying loading angles with respect to the foliation planes and different confining pressures. Subsequently, the results of the nonlinear 2D finite element simulations of tunnel excavation are presented for different anisotropy parameters and different orientations of the principal material directions with respect to the tunnel axis. The capabilities of the TI-RDP model are assessed by comparing the numerically predicted results with those obtained by the isotropic version of the RDP model.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Rock Mechanics and Modeling · Tunneling and Rock Mechanics · Geotechnical Engineering and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Unit of Strength of Materials and Structural Analysis, Department of Basic Sciences in Engineering Sciences, University of Innsbruck, Technikerstraße 13, A-6020 Innsbruck, Austria
Funding
Tyrolean Science Fund
References (55)
Show source-provided references
1. A review of discrete modeling techniques for fracturing processes in discontinuous rock masses10.1016/j.jrmge.2013.12.007 ↗
2. Numerical methods in rock mechanics10.1016/S1365-1609(02)00065-5 ↗
3. A review of techniques, advances and outstanding issues in numerical modelling for rock mechanics and rock engineering10.1016/S1365-1609(03)00013-3 ↗
4. Shear strength criteria for rock, rock joints, rockfill and rock masses: Problems and some solutions10.1016/j.jrmge.2013.05.008 ↗
5. Wittke, W. (2014). Rock Mechanics Based on an Anisotropic Jointed Rock Model (AJRM), John Wiley & Sons.10.1002/9783433604281 ↗
6. Empirical estimation of rock mass modulus10.1016/j.ijrmms.2005.06.005 ↗
7. Hammah, R. (2002, January 7–10). Hoek-Brown failure criterion—2002 ed. Proceedings of the 5th North American Rock Mechanics Symposium and the 17th Tunnelling Association of Canada, Toronto, ON, Canada.
8. Empirical strength criterion for rock masses
9. A damage plasticity model for different types of intact rock10.1016/j.ijrmms.2015.09.012 ↗
10. Damage-plastic model for concrete failure10.1016/j.ijsolstr.2006.06.032 ↗
11. Triaxial failure criterion for concrete and its generalization
12. Schreter, M., Neuner, M., and Hofstetter, G. (2018). Evaluation of the implicit gradient-enhanced regularization of a damage-plasticity rock model. Appl. Sci., 8.10.3390/app8061004 ↗
13. A theory of the yielding and plastic flow of anisotropic metals
14. Pariseau, W.G. (1968, January 20–22). Plasticity theory for anisotropic rocks and soil. Proceedings of the 10th U.S. Symposium on Rock Mechanics (USRMS), Austin, TX, USA.
15. A general theory of strength for anisotropic materials10.1177/002199837100500106 ↗
16. Shear failure of anisotropic rocks10.1017/S0016756800061100 ↗
17. Goodman, R.E. (1967). Research on Rock Bolt Reinforcement and Integral Lined Tunnels, Corps of Engineers. Technical Report; No. OMAHA-TR-3.10.21236/ADA363465 ↗
18. Integration of elastic stiffness anisotropy into ubiquitous joint model10.1016/j.proeng.2017.05.276 ↗
19. A new continuum-based constitutive model for the simulation of the inherent anisotropy of Opalinus clay10.1016/j.tust.2019.103106 ↗
20. Formulation of anisotropic failure criteria incorporating a microstructure tensor10.1016/S0266-352X(99)00034-8 ↗
21. A generalized anisotropic failure criterion for geomaterials10.1016/j.ijsolstr.2010.07.016 ↗
22. Coupled elastoplastic damage modeling of anisotropic rocks10.1016/j.compgeo.2009.09.001 ↗
23. Induced anisotropic damage and plasticity in initially anisotropic sedimentary rocks10.1016/j.ijrmms.2012.01.013 ↗
24. Hydro-mechanical modeling of tunnel excavation in anisotropic shale with coupled damage-plasticity and micro-dilatant regularization10.1007/s00603-018-1569-z ↗
25. Equilibre limite des sols anisotropes
26. On yielding of oriented solids10.1007/BF01180085 ↗
27. Crook, A.J., Yu, J.G., and Willson, S.M. (2002, January 20–23). Development of an orthotropic 3D elastoplastic material model for shale. Proceedings of the SPE/ISRM Rock Mechanics Conference, Irving, TX, USA.10.2523/78238-MS ↗
28. Thermoplasticity and strain localization in transversely isotropic materials based on anisotropic critical state plasticity10.1002/nag.2536 ↗
29. A micromorphically regularized Cam-clay model for capturing size-dependent anisotropy of geomaterials10.1016/j.cma.2019.05.003 ↗
30. On the strength of transversely isotropic rocks10.1002/nag.2809 ↗
31. Zhao, Y., and Borja, R.I. (2022). A double-yield-surface plasticity theory for transversely isotropic rocks. Acta Geotech., 1–21.10.1007/s11440-022-01605-6 ↗
32. A gradient enhanced transversely isotropic damage plasticity model for rock—Formulation and comparison of different approaches10.1002/nag.3327 ↗
33. Borehole instabilities as bifurcation phenomena10.1016/0148-9062(88)92298-X ↗
34. Computational modelling of the localized deformation associated with borehole breakout in quasi-brittle materials10.1016/S0920-4105(03)00031-7 ↗
35. Zervos, A., Papanastasiou, P., and Cook, J. (1998). Elastoplastic finite element analysis of inclined wellbores. SPE/ISRM Rock Mechanics in Petroleum Engineering, OnePetro.10.2523/47322-MS ↗
36. Advanced finite element modeling of excavation and advancement processes in mechanized tunneling10.1016/j.advengsoft.2016.07.011 ↗
37. Computational modelling of the mechanised excavation of deep tunnels in weak rock10.1016/j.compgeo.2015.01.020 ↗
38. Analysis of borehole breakout development using continuum damage mechanics10.1016/j.ijrmms.2017.04.005 ↗
39. On the importance of advanced constitutive models in finite element simulations of deep tunnel advance10.1016/j.tust.2018.06.008 ↗
40. Numerical simulation of the failure mechanism of circular tunnels in transversely isotropic rock masses10.1016/j.tust.2012.07.003 ↗
41. Application of a multilaminate model to simulation of shear band formation in NATM-tunnelling10.1016/S0266-352X(02)00013-7 ↗
42. Shear banding modelling in cross-anisotropic rocks10.1016/j.ijsolstr.2015.07.012 ↗
43. Factors influencing overbreak volumes in drill-and-blast tunnel excavation. A statistical analysis applied to the case study of the brenner base tunnel—BBT10.1016/j.tust.2020.103475 ↗
44. 3D fold and fault reconstruction with an uncertainty model: An example from an alpine tunnel case study10.1016/j.cageo.2007.04.002 ↗
45. Cordes, T., Schreter, M., Schneider-Muntau, B., Neuner, M., Bergmeister, K., and Hofstetter, G. (2019, January 3–5). On the prediction of the longitudinal displacement profile of a stretch of the brenner base tunnel—Analytical, experimental and numerical approaches. Proceedings of the Underground Construction, Prague, Czech Republic.
46. Cam-Clay plasticity. Part IX: On the anisotropy, heterogeneity, and viscoplasticity of shale10.1016/j.cma.2019.112695 ↗
47. Bryant, E.C. (2020). Capturing Evolving Size-Dependent Anisotropy from Brittle Fracture to Plasticity for Geological Materials. [Ph.D. Thesis, Columbia University].
48. Fourth-rank tensors of the thirty-two crystal classes: Multiplication tables
49. Constitutive model for the triaxial behaviour of concrete
50. Hicks, M.A., Brinkgreve, R.B., and Rohe, A. (2014, January 18–20). Parameter identification for an advanced material model for intact rock. Proceedings of the 8th European Conference on Numerical Methods in Geotechnical Engineering (NUMGE 2014), Delft, The Netherlands.10.1201/b17017 ↗
51. Blümel, M. (2014). Prüfprotokolle Laborversuche Druckversuche Anfahrtstutzen Ahrntal, Institut für Felsmechanik und Tunnelbau TU Graz. Technical Report.
52. Jones, E., Oliphant, T., and Peterson, P. (2022, August 20). SciPy: Open Source Scientific Tools for Python. Available online: https://github.com/scipy/scipy.
53. Strain localization in sand: An overview of the experimental results obtained in Grenoble using stereophotogrammetry10.1002/nag.338 ↗
54. Papamichos, E., Liolios, P., and Van den Hoek, P. (2004, January 5–10). Breakout stability experiments and analysis. Proceedings of the Gulf Rocks 2004, the 6th North America Rock Mechanics Symposium (NARMS), Houston, TX, USA.
55. Influence of borehole diameter on the formation of borehole breakouts in black shale10.1016/j.ijrmms.2013.03.012 ↗