WAMs Based Eigenvalue Space Model for High Impedance Fault Detection
Source abstract
Abstract
High impedance faults present unique challenges for power system protection engineers. The first challenge is the detection of the fault, given the low current magnitudes. The second challenge is to locate the fault to allow corrective measures to be taken. Corrective actions are essential as they mitigate safety hazards and equipment damage. The problem of high impedance fault detection and location is not a new one, and despite the safety and reliability implications, relatively few efforts have been made to find a general solution. This work presents a hybrid data driven and analytical-based model for high impedance fault detection in distribution systems. The first step is to estimate a state space model of the power line being monitored. From the state space model, eigenvalues are calculated, and their dynamic behavior is used to develop zones of protection. These zones of protection are generated analytically using machine learning tools. High impedance faults are detected as they drive the eigenvalues outside of their zones. A metric called eigenvalue drift coefficient was formulated in this work to facilitate the generalization of this solution. The performance of this technique is evaluated through case studies based on the IEEE 5-Bus system modeled in Matlab. Test results are encouraging indicating potential for real-life applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Power Systems Fault Detection · Electrical Fault Detection and Protection · Lightning and Electromagnetic Phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Electrical and Computer Engineering, University of Florida, Gainesville, FL 32611-6200, USA
Funding
National Science Foundation
References (30)
Show source-provided references
1. System unbalance and fault impedance effect on faulted distribution networks10.1016/j.camwa.2010.03.067 ↗
2. Tampa Bay Times (Tampa Bay Times, 2016). A live power line lay on the ground for hours, unnoticed until it killed someone. How does that happen?, Tampa Bay Times.
3. Incipient fault location formulation: A time-domain system model and parameter estimation approach10.1016/j.ijepes.2017.01.008 ↗
4. Incipient fault location method for distribution networks with underground shielded cables: A system identification approach10.1002/etep.2465 ↗
5. Orozco-Henao, C., Bretas, A., Marin-Quintero, J., Herrera-Orozco, A., Pulgarin-Rivera, J., and Velez, J. (2018). Adaptive Impedance-Based Fault Location Algorithm for Active Distribution Networks. Appl. Sci., 8.10.3390/app8091563 ↗
6. Zou, T., Aljohani, N., Nagaraj, K., Zou, S., Ruben, C., Bretas, A., Zare, A., and McNair, J. (2021). A Network Parameter Database False Data Injection Correction Physics-Based Model: A Machine Learning Synthetic Measurement-Based Approach. Appl. Sci., 11.10.3390/app11178074 ↗
7. Aljohani, N., and Bretas, A. (2021). A Bi-Level Model for Detecting and Correcting Parameter Cyber-Attacks in Power System State Estimation. Appl. Sci., 11.10.3390/app11146540 ↗
8. Distribution networks HIF location: A frequency domain system model and WLS parameter estimation approach10.1016/j.epsr.2017.01.030 ↗
9. Active distribution network fault location methodology: A minimum fault reactance and Fibonacci search approach10.1016/j.ijepes.2016.06.002 ↗
10. Bretas, A., Bretas, N., London, J., and Carvalho, B. (2021). Cyber-Physical Power Systems State Estimation, Elsevier.
11. Convergence Property of the Measurement Gross Error Correction in Power System State Estimation, Using Geometrical Background10.1109/TPWRS.2013.2260360 ↗
12. Distribution Systems High-Impedance Fault Location: A Parameter Estimation Approach10.1109/TPWRD.2015.2507541 ↗
13. Arc fault location: A nonlinear time varying fault model and frequency domain parameter estimation approach10.1016/j.ijepes.2016.02.003 ↗
14. Nam, S.R., Park, J.K., Kang, Y.C., and Kim, T.H. (2001, January 15–19). A Modeling Method of a High Impedance Fault in a Distribution System Using Two Series Time-Varying Resistances in EMTP. Proceedings of the IEEE Power Engineering Society Summer Meeting, Vancouver, BC, Canada.10.1109/PESS.2001.970231 ↗
15. The Extension of the Gauss Approach for the Solution of an Overdetermined Set of Algebraic Non Linear Equations
16. A two steps procedure in state estimation gross error detection, identification, and correction10.1016/j.ijepes.2015.05.044 ↗
17. Non-linear high impedance fault distance estimation in power distribution systems: A continually online-trained neural network approach10.1016/j.epsr.2017.11.018 ↗
18. Physics-based analytical model for high impedance fault location in distribution networks10.1016/j.epsr.2020.106577 ↗
19. Distribution systems high impedance fault location: A spectral domain model considering parametric error processing10.1016/j.ijepes.2019.02.012 ↗
20. Ghalei, M., Zanjani, M., Kargar, H.K., and Zanjani, M.G.M. (2012, January 1). High impedance fault detection of distribution network by phasor measurement units. Proceedings of the 17th Conference on Electrical Power Distribution, Tehran, Iran.
21. Hossain, S., Zhu, H., and Overbye, T. (2014, January 7–9). Distribution high impedance fault location using localized voltage magnitude measurements. Proceedings of the 2014 North American Power Symposium (NAPS), Pullman, WA, USA.10.1109/NAPS.2014.6965403 ↗
22. Patynowski, D., Cardenas, J., Menendez, D., Zhang, Z., Roca, J.M., Germain, J.G., Huete, A.Y., Canales, M., Martinez, A., and Rosendo, J.A. (April, January 30). Fault Locator approach for high-impedance grounded or ungrounded distribution systems using synchrophasors. Proceedings of the 68th Annual Conference of Protective Relay Engineers, College Station, TX, USA.
23. RGKM Aarts (2012). System identification and parameter estimation. Lecture Notes, University of Twente.
24. Trevizan, R.D., Ruben, C., Rossoni, A., Dhulipala, S.C., Bretas, S.A., and Bretas, N.G. (2021). µPMU-Based Temporal Decoupling of Parameter and Measurement Gross Error Processing in DSSE. Electricity, 2.10.3390/electricity2040025 ↗
25. Bretas, A., Bretas, N., Massignan, J., and London Junior, J. (2021). Hybrid Physics-Based Adaptive Kalman Filter State Estimation Framework. Energies, 14.10.3390/en14206787 ↗
26. Horowitz, S.H., and Phadke, A.G. (2014). Power System Relaying, Wiley. [4th ed.].
27. (2021, July 30). MathWorks Cluster Analysis. Available online: https://www.mathworks.com/discovery/cluster-analysis.html.
28. Singh, U., Zamani, V., and Baran, M.E. (2016, January 17–21). Online load estimation for distribution automation using AMI data. Proceedings of the 2016 IEEE Power and Energy Society General Meeting (PESGM), Boston, MA, USA.10.1109/PESGM.2016.7741806 ↗
29. (2021, October 10). ERCOT Grid Info: Load. Loading Data. Available online: http://www.ercot.com/gridinfo/load.
30. Tan, R. (2021, October 03). IEEE 5-Bus System Model. Simulink Model. Available online: https://www.mathworks.com/matlabcentral/fileexchange/66555-ieee-5-bus-system-model.