Dynamic Analysis for a Reciprocating Compressor System with Clearance Fault
Source abstract
Abstract
In order to explore the failure mechanism of a reciprocating compressor system with clearance fault, we implemented a computational framework whereby a simulation model of the mechanism is established using ADAMS software in this paper, and a typical reciprocating compressor model is introduced to validate the design model. In this work, the joint clearance faults between the crankshaft and linkage, between the linkage and crosshead, and in both locations are taken into account computationally. These faults are one of the major causes of vibration. Through dynamic calculation and analysis of a system with clearance fault, the simulated results show that these clearance faults directly influence the vibration. The larger the gap size, the more severe the vibration and the higher the amplitude of the vibration. Furthermore, the clearance number also affects the vibration greatly.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Hydraulic and Pneumatic Systems · Mechanical Failure Analysis and Simulation · Gear and Bearing Dynamics Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Information, Mechanical and Electrical Engineering, Ningde Normal University, Ningde 352100, China
School of Mechatronic Engineering and Automation, Shanghai University, Shanghai 200072, China
College of Mechanical and Electrical Engineering, Fujian Agriculture and Forestry University, Fuzhou 350000, China
Funding
Natural Science Foundation of Fujian Province · Major training project of Ningde Normal University · Innovation Team of Ningde Normal University
References (24)
Show source-provided references
1. Automated valve fault detection based on acoustic emission parameters and support vector machine10.1016/j.aej.2016.12.010 ↗
2. Fault-diagnosis for reciprocating compressors using big data and machine learning10.1016/j.simpat.2017.10.005 ↗
3. A novel scheme for fault detection of reciprocating compressor valves based on basis pursuit, wave matching and support vector machine10.1016/j.measurement.2012.02.005 ↗
4. Fault diagnosis of reciprocating compressor using a novel ensemble empirical mode decomposition-convolutional deep belief network10.1016/j.measurement.2020.107619 ↗
5. Valve fault detection for single-stage reciprocating compressors10.1016/j.jngse.2016.09.062 ↗
6. Fault Detection of Reciprocating Compressor Valve Based on One-Dimensional Convolutional Neural Network
7. Fault detection in reciprocating compressor valves under varying load conditions10.1016/j.ymssp.2015.09.005 ↗
8. Cerrada, M., Macancela, J.C., Cabrera, D., Estupiñan, E., Sánchez, R.V., and Medina, R. (2020). Reciprocating Compressor Multi-Fault Classi-fication Using Symbolic Dynamics and Complex Correlation Measure. Appl. Sci., 10.10.3390/app10072512 ↗
9. Semi-supervised vibration-based classification and condition monitoring of compressors10.1016/j.ymssp.2017.01.048 ↗
10. Advanced diagnostic system for piston slap faults in IC engines, based on the non-stationary characteristics of the vibration signals10.1016/j.ymssp.2015.12.023 ↗
11. Investigation into piston-slap-induced vibration for engine condition simulation and monitoring10.1016/j.jsv.2004.03.057 ↗
12. Dynamic model of a hermetic reciprocating compressor in on–off cycling operation (Abbreviation: Compressor dynamic model)10.1016/j.applthermaleng.2009.12.007 ↗
13. Modeling of a semi-hermetic CO2 reciprocating compressor including lubrication submodels for piston rings and bearings10.1016/j.ijrefrig.2012.10.017 ↗
14. Thermodynamic analysis of natural gas reciprocating compressors based on real and ideal gas models10.1016/j.ijrefrig.2014.11.008 ↗
15. Numerical modeling of startup and shutdown transients in reciprocating compressors10.1016/j.ijrefrig.2011.04.005 ↗
16. Numerical dynamic analysis of reciprocating compressor mechanism. Parametric studies for optimization purposes10.1016/j.triboint.2016.06.019 ↗
17. A new study and model for the mechanism of process reciprocating compressors and pumps10.1243/09544089JPME334 ↗
18. A parameters optimization method for planar joint clearance model and its application for dynamics simulation of reciprocating compressor10.1016/j.jsv.2015.01.044 ↗
19. Xiao, Q. (2019). Research on Simulation Device and Fault Simulation of Reciprocating Compressor Transmission Mechanism, University Press.
20. Dynamics analysis of planar rigid-flexible coupling deployable solar array system with multiple revolute clearance joints10.1016/j.ymssp.2018.07.037 ↗
21. Nonlinear dynamic response of reciprocating compressor system with rub-impact fault caused by subsidence10.1177/1077546319835281 ↗
22. A comprehensive survey of the analytical, numerical and experimental methodologies for dynamics of multibody mechanical systems with clearance or imperfect joints10.1016/j.mechmachtheory.2017.12.002 ↗
23. Coupling rub-impact dynamics of double translational joints with subsidence for time-varying load in a planar mechanical system10.1007/s11044-019-09718-9 ↗
24. Nonlinear dynamics of coupling rub-impact of double translational joints with subsidence considering the flexibility of piston rod10.1007/s11071-020-05566-x ↗