Calibration and Verification Test of Lily Bulb Simulation Parameters Based on Discrete Element Method
Source abstract
Abstract
In the simulation analysis of the lily harvesting process, the intrinsic parameters of the lily bulb and the contact parameters between the lily bulb and the lily mechanized harvesting equipment (Q235 steel) are deficient. Thus, the three-axis size, density, moisture content, Poisson’s ratio, elastic modulus, and other parameters of lily bulbs are measured in this paper with lily bulbs as the research object. Moreover, the discrete element model of the lily bulb was established using 3D scanning technology. The contact parameters between the lily bulb and Q235 steel were calibrated through bench test and simulation parameter test. The relative error between the measured value of the lily bulb accumulation angle and the simulated value is taken as response value to calibrate three parameters (collision recovery coefficient, static friction coefficient, and dynamic friction coefficient between lily bulbs). A regression model of the relative error of the stacking angle and three parameters is established, and the response surface is optimized. The results demonstrate that collision recovery coefficient, static friction coefficient, and dynamic friction coefficient between lily bulb and Q235 steel are 0.301, 0.423, and 0.063, respectively; these coefficients between lily bulbs are 0.455, 0.425, and 0.158, respectively. Additionally, a better combination of parameters is adopted to perform the simulation stacking test. The measured stacking angle is 32.31°, which is 0.34% in error with the stacking angle obtained by the physical stacking test. The test results suggest that the discrete element model and contact parameters of the lily bulb can be used in the discrete element simulation test. Furthermore, these research results could provide references for simulation tests, such as mechanized harvesting and post-harvest processing, of lily.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Soil Mechanics and Vehicle Dynamics · Agricultural Engineering and Mechanization · Tree Root and Stability Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Mechanical and Electrical, Hunan Agricultural University, Changsha 410128, China
Hunan Mechanical & Electrical Polytechnic, Changsha 410151, China
Hunan Provincial Engineering Technology Research Center for Modern Agricultural Equipment, Changsha 410128, China
References (31)
Show source-provided references
1. Hunan Provincial Market Supervision Administration (2019). Product of Geographical indcation-LongHui Lilium Brownii var. viridulum Baker Part 1: Products Quality, Hunan Local Standard. DB43/T 215.1-2019.
2. Hunan Provincial Market Supervision Administration (2019). Product of Geographical Indcation-LongHui lilium brownii var. viridulum Baker Part 3: Technology Specification for Harvesting and Primary Processing, Hunan Local Standard. DB43/T 215.3-2019.
3. Calibration of simulation physical parameters of clay loam based on soil accumulation test
4. Calibration of dem models for irregular particles based on experimental check for design method and bulk experiments
5. Discrete element modelling (dem) of fertilizer dual-banding with adjustable rates10.1016/j.compag.2018.06.044 ↗
6. Modelling and simulation of the grain threshing process based on the discrete element method10.1016/j.compag.2020.105790 ↗
7. Fertilizer sowing simulation of a variable-rate fertilizer applicator based on edem—Sciencedirect10.1016/j.ifacol.2018.08.185 ↗
8. Effect of soil particle size on soil-subsoiler interactions using the discrete element method simulations10.1016/j.biosystemseng.2019.04.005 ↗
9. Simulation of tillage forces and furrow profile during soil-mouldboard plough interaction using discrete element modelling10.1016/j.biosystemseng.2019.11.022 ↗
10. Chen, Z., Wassgren, C., Veikle, E., and Ambrose, K. (2020). Determination ofmaterial and interaction properties of maize and wheat kernels for DEM simulation. Biosyst. Eng., 208–226.10.1016/j.biosystemseng.2020.05.007 ↗
11. Modelling the aggregate structure of a bulk soil to quantify fragmentation properties and energy demand of soil tillage tools in the formation of seedbeds10.1016/j.biosystemseng.2020.06.019 ↗
12. Calibration of discrete element parameters and the modelling of silo discharge and bucket filling10.1016/j.compag.2008.10.002 ↗
13. Three-dimensional discrete element modelling of tillage: Determination of a suitable contact model and parameters for a cohesionless soil10.1016/j.biosystemseng.2014.02.005 ↗
14. Three-dimensional discrete element modelling (DEM) of tillage: Accounting for soil cohesion and adhesion10.1016/j.biosystemseng.2014.11.006 ↗
15. Calibration of discrete element model parameters: Soybeans10.1007/s40571-018-0194-7 ↗
16. Development of discrete element model and calibration of simulation parameters for mechanically-harvested yam
17. Calibration of simulation parameters of flaxed seeds using discrete element method and verification of seed-metering test
18. Parameter calibration of discrete element simulation model for pig manure organic fertilizer treated with Hermetia illucen
19. Simulative Calibration and Experiment on Main Contact Parameters of Discrete Elements for Rice Bud Seeds
20. Calibration of discrete-element-method model parameters of bulk wheat for storage—Sciencedirect10.1016/j.biosystemseng.2020.10.010 ↗
21. Dem simulations and experiments investigating the influence of feeding plate angle in a rubber-roll paddy grain huller10.1016/j.biosystemseng.2020.11.003 ↗
22. Draft force prediction for a high-speed disc implement using discrete element modelling10.1016/j.biosystemseng.2020.12.009 ↗
23. Seed motion characteristics and seeding performance of a centralised seed metering system for rapeseed investigated by dem simulation and bench testing10.1016/j.biosystemseng.2020.12.017 ↗
24. Stress distribution on a soil tillage machine frame segment with a chisel shank simulated using discrete element and finite element methods and validate by experiment10.1016/j.biosystemseng.2021.06.012 ↗
25. Design and performance of a countersunk screen in a maize cleaning device10.1016/j.biosystemseng.2021.07.008 ↗
26. Discrete element method optimisation of a scraper to remove soil from ridges formed to cold-proof grapevines10.1016/j.biosystemseng.2021.08.014 ↗
27. Role of particle shape and plant roots in the discrete element model of soilesweep interaction10.1016/j.biosystemseng.2021.09.001 ↗
28. Calibration and experiments for discrete element simulation parameters of peanut seed particles
29. Algorithm for the determination of the angle of repose in bulk material analysis10.1016/j.powtec.2021.01.010 ↗
30. Calibration of simulation parameters for potato minituber based on edem
31. Zeng, L. (2020). Design and Experimental Study of Lily Bulbs Harvester. [Master’s Thesis, Shenyang Agricultural University].