Air-Based Contactless Wafer Precision Positioning System
Source abstract
Abstract
This paper presents the development of a contactless sensing system and the dynamic evaluation of an air-bearing-based precision wafer positioning system. The contactless positioning stage is a response to the trend seen in the high-tech industry, where the substrates are becoming thinner and larger to reduce the cost and increase the yield. Using contactless handling it is possible to avoid damage and contamination. The system works by floating the substrate on a thin film of air. A viscous traction force is created on the substrate by steering the airflow. A cascaded control design structure has been implemented on the contactless positioning system, where the inner loop controller (ILC) controls the actuator which steers the airflow and the outer loop controller (OLC) controls the position of the substrate by controlling the reference of the ILC. The dynamics of the ILC are evaluated and optimized for the performance of the positioning of the substrate. The vibration disturbances are also handled by the ILC. The bandwidth of the system has been improved to 300 Hz. For the OLC, a linear charge-coupled device has been implemented as a contactless sensor. The performance of the sensing system has been analysed. During control in steady-state, this resulted in a position error of the substrate of 12.9 μm RMS, which is a little more than two times the resolution. The bandwidth of the OLC is approaching 10 Hz.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Iterative Learning Control Systems · Advanced Surface Polishing Techniques · Advanced Measurement and Metrology Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Precision and Microsystems Engineering, Delft University of Technology, Mekelweg 5, 2628 CD Delft, The Netherlands
References (21)
Show source-provided references
1. Fraunhofer ISE (2018). Photovoltaics Report, Fraunhofer ISE.
2. Carey, S., Knotter, D.M., Ooms, E., Boersma, J., van der Sar, E., Cop, R., Gerritzen, W., van Zadelhoff, H., and Bouma, H. (2012). Yield Impact of Backside Metal-Ion Contamination. Solid State Phenomena, Trans Tech Publications.10.4028/www.scientific.net/SSP.187.287 ↗
3. Wesselingh, J. (2011). Contactless Positioning Using an Active Air Film. [Ph.D. Thesis, Delft University of Technology]. Available online: https://repository.tudelft.nl/islandora/object/uuid%3A4f90d3b0-1698-4885-b4b4-bdec9d886893.
4. Vuong, P.H. (2016). Air-Based Contactless Actuation System for Thin Substrates. [Ph.D. Thesis, Delft University of Technology]. Available online: https://repository.tudelft.nl/islandora/object/uuid%3A2d375f1b-3857-4c03-87e8-cb0fc45f3f13.
5. Verbruggen, N. (2018). Air-Based Contactless Positioning of Thing Substrates. [Master’s Thesis, Delft University of Technology]. Available online: https://repository.tudelft.nl/islandora/object/uuid%3A42b0d71c-3055-41a8-8234-5acc8319f378.
6. Vagher, E.P. (2016). Contactless Passive Transport of Thin Solar Cells. [Master’s Thesis, Delft University of Technology]. Available online: https://repository.tudelft.nl/islandora/object/uuid%3A1386cbd2-eca4-44a1-9dce-b8ec2083176b.
7. Snieder, J. (2017). Development of an Air-Based Contactless Transport Demonstrator. [Master’s thesis, Delft University of Technology]. Available online: https://repository.tudelft.nl/islandora/object/uuid%3A870adc6e-2f78-468c-a6c2-079eaec49226.
8. Voorrips, Y. (2017). The Design of a Distributed Sensing System for Contactless Substrate Transport. [Master’s Thesis, Delft University of Technology]. Available online: https://repository.tudelft.nl/islandora/object/uuid%3A97c923e7-09d3-439b-87f2-e88d786d71b5.
9. A survey of non-prehensile pneumatic manipulation surfaces: Principles, models and control10.1007/s11370-015-0175-0 ↗
10. Spaan-Burke, T.M., van Dam, T., Overschie, P., and Spaan, H.A. (November, January 29). Contactless Shape Manipulation of Thin Substrates Using Air Bearing Table. Proceedings of the 2017 ASPE Annual Meeting, Charlotte, NC, USA.
11. Design of the Air Pressure Pick-up Head for Non-Contact Wafer Gripper
12. Reinhart, G., Heinz, M., Stock, J., Zimmermann, J., Schilp, M., Zitzmann, A., and Hellwig, J. (2011, January 16–18). Non-contact handling and transportation for substrates and microassembly using ultrasound-air-film-technology. Proceedings of the 2011 IEEE/SEMI Advanced Semiconductor Manufacturing Conference, Saratoga Springs, NY, USA.10.1109/ASMC.2011.5898208 ↗
13. Jansen, R. (2018). Actuation System for the FLowerbed. [Master’s Thesis, Delft University of Technology]. Available online: https://repository.tudelft.nl/islandora/object/uuid%3Ab4a3a5da-c512-40ed-b631-cf2d6e638ce6.
14. Krijnen, M.E. (2016). Control System Design for a Contactless Actuation System. [Master’s Thesis, Delft University of Technology]. Available online: https://repository.tudelft.nl/islandora/object/uuid%3Abef72c5e-7ca1-41eb-85ba-fc6fc59a6ce2.
15. The application of fractional order control for an air-based contactless actuation system10.1016/j.isatra.2017.04.014 ↗
16. Katalenic, A. (2013). Control of Reluctance Actuators for High-Precision Positioning. [Ph.D. Thesis, Technische Universiteit Eindhoven].
17. Li, C.-M., and Xu, G.-S. (2009, January 21–22). Sub-pixel Edge Detection Based on Polynomial Fitting for Line-Matrix CCD Image. Proceedings of the 2009 Second International Conference on Information and Computing Science, Manchester, UK.10.1109/ICIC.2009.177 ↗
18. Xu, G.-S. (2009, January 21–22). Linear Array CCD Image Sub-pixel Edge Detection Based on Wavelet Transform. Proceedings of the 2009 Second International Conference on Information and Computing Science, Manchester, UK.
19. Fischer, J., and Pribula, O. (2011, January 15–17). Precise subpixel position measurement with linear interpolation of CMOS sensor image data. Proceedings of the 6th IEEE International Conference on Intelligent Data Acquisition and Advanced Computing Systems, Prague, Czech Republic.10.1109/IDAACS.2011.6072804 ↗
20. Edge detection with sub-pixel accuracy based on approximation of edge with Erf function
21. Simple methods of edge position measurement using shadow projected on CCD sensor