Modal Verification and Strength Analysis of Bladed Rotors of Turbine in Rated Working Conditions
Source abstract
Abstract
The Top-pressure Recovery Turbine (TRT) uses the blast furnace gas generated in the iron and steel manufacturing process to push the turbine which drives the generator to generate electricity, and the generated electric energy is supplied to in-plant equipment. In this paper, we investigate the aerodynamic force, centrifugal force, and maximum stress on the structure of the TRT rotor in rated working conditions and the positions of occurrence using the Finite Element Method (FEM), as well as discuss the dynamic characteristics of bladed disks during TRT operation through Campbell and SAFE diagrams. To confirm the effectiveness of the finite element models, the mode shapes and natural frequencies in the FEA-based modal analysis of the TRT rotor will be captured and compared with those of the practical structures through the Experimented Modal Analysis (EMA). To verify the agreement between the mode shapes of the finite element analysis and those of the actual structure, the Modal Assurance Criterion (MAC) is introduced here to confirm the reliability of the finite element model. The stress distribution on the structure in the rotation is obtained by centrifugal force analysis. The TRT rotor is driven as the blast furnace top pressure pushes the moving blade; when the rotor rotates, the moving blade bears centrifugal and periodic aerodynamic forces. The stress distribution is investigated on the structure when these forces act simultaneously using aerodynamic analysis. To discuss whether the bladed disks will resonate with the external force under the operating conditions, Campbell and SAFE diagrams are used for evaluation, and the modal parameters obtained from the EMA are used to estimate the strength and durability of the blades. According to the analysis results when the TRT rotor is in working conditions, the fatigue failure may occur at the maximum stress existing on the dovetail slot.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Bladed Disk Vibration Dynamics · Fatigue and fracture mechanics · Mechanical and Thermal Properties Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Vehicle Engineering, National Pingtung University of Science and Technology, Pingtung 91201, Taiwan
Green Energy & System Integration Research & Development Department, Technology Division, China Steel Corporation, Kaohsiung 81233, Taiwan
References (17)
Show source-provided references
1. Energy Saving Technologies and Mass-thermal Network Optimization for Decarbonized Iron and Steel Industry: A Review10.1016/j.jclepro.2020.122997 ↗
2. Waste Energy Recovery and Energy Efficiency Improvement in China’s Iron and Steel Industry10.1016/j.apenergy.2017.01.072 ↗
3. The Fatigue of Impellers and Blades10.1016/j.engfailanal.2016.02.001 ↗
4. Analysis on Corrosion Fatigue Cracking Mechanism of 17-4PH Blade of Low Pressure Rotor of Steam Turbine10.1016/j.engfailanal.2020.104925 ↗
5. Failure Analysis of a 2nd stage Blade in a Gas Turbine Engine10.1016/j.engfailanal.2007.11.020 ↗
6. On the Failure Behavior of Fifth Stage Gas Turbine Blade10.1016/j.engfailanal.2020.104766 ↗
7. Corrosion Fatigue Failure of Steam Turbine Moving Blades: A Case Study10.1016/j.engfailanal.2019.08.002 ↗
8. Vibration Analysis for Failure Detection in Low Pressure Steam Turbine Blades in Nuclear Power Plant10.1016/j.engfailanal.2017.10.009 ↗
9. Experimental Investigation of Failure Behavior of the Cracked 17-4PH Steel Blades in a Top Gas Energy Recovery Turbine10.1016/j.engfailanal.2019.07.009 ↗
10. Detection of Damage in Steam Turbine Blades Caused by Low Cycle and Strain Cycling Fatigue10.1016/j.engfailanal.2019.01.015 ↗
11. Fatigue of Steam Turbine Blades at Resonance Conditions10.1016/j.engfailanal.2019.05.027 ↗
12. Experimental and numerical investigation on the influence of a large crack on the modal behaviour of a Kaplan turbine blade10.1016/j.engfailanal.2020.104389 ↗
13. Investigation of a Rotor Blade Dynamics Using Experimental Modal Testing
14. Singh, M.P., Vargo, J.J., Schiffer, D.M., and Dello, J.D. (1988). SAFE Diagram—A Design Reliability Tool for Turbine Blading. Proceedings of the Seventeenth Turbomachinery Symposium, Turbomachinery Laboratory, Texas A&M University.
15. Analytical Investigation of the SAFE Diagram for Bladed Wheels, Numerical and Experimental Validation10.1016/j.jsv.2014.04.061 ↗
16. Vibration Based Damage Detection of Rotor Blades in a Gas Turbine Engine10.1016/j.engfailanal.2014.07.021 ↗
17. The Modal Assurance Criterion–Twenty Years of Use and Abuse