Comparison between 2D and 3D applications of the coupled criterion to crack initiation prediction in scarf adhesive joints
Source abstract
Abstract
Abstract Crack initiation of scarf adhesive joints with similar adherends is predicted through 2D and 3D applications of the coupled criterion. The joint adhesive crack initiation topology and loading are determined as a function of the joint angle and of the specimen width, using both an energy and a stress criterion consisting of the maximum interface normal or shear stress to strength ratio. Adherend/ adhesive interface strength and toughness are determined by indirect confrontation to experimental results under tensile loading. The blind application of the proposed method to crack initiation of scarf adhesive joints under bending leads to a good agreement with experimental data. Compared to the 2D case, the 3D application of the coupled criterion allows determining the crack topology and leads to a slight better agreement with experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Fatigue and fracture mechanics · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Comparison between models based on a coupled criterion for the prediction of the failure of adhesively bonded joints10.1016/j.engfracmech.2015.03.004 ↗
2. 3D models of specimens with a scarf joint to test the adhesive and cohesive multi-axial behavior of adhesives10.1016/j.ijadhadh.2015.07.005 ↗
3. Three-dimensional asymptotic stress field in the vicinity of an adhesively bonded scarf joint interface10.1016/j.compstruct.2008.10.002 ↗
4. Damage onset modeling in woven composites based on a coupled stress and energy criterion10.1016/j.engfracmech.2016.11.021 ↗
5. 3D application of the coupled criterion to crack initiation prediction in epoxy/aluminum specimens under four point bending10.1016/j.ijsolstr.2018.03.005 ↗
6. A numerical study of transverse cracking in cross-ply laminates by 3D finite fracture mechanics10.1016/j.compositesb.2016.03.023 ↗
7. A coupled stress and energy criterion for the assessment of crack initiation in single lap joints: a numerical approach10.1016/j.engfracmech.2014.01.012 ↗
8. Reliability analysis of adhesive bonded scarf joints10.1016/j.engstruct.2011.11.013 ↗
9. Effect of adhesive thickness, adhesive type and scarf angle on the mechanical properties of scarf adhesive joints10.1016/j.ijsolstr.2013.09.005 ↗
10. Leguillon · 1987
11. Leguillon D. Computation of 3D-singularities in elasticity, in Boundary Value Problems and Integral Equations on Non-Smooth Domains M, Costabel M, Dauge S, Nicaise eds., Lect. Notes in Pure and Applied Math., 167, Marcel Dekker, New York; 1995 161–70.
12. Strength or toughness? A criterion for crack onset at a notch10.1016/S0997-7538(01)01184-6 ↗
13. The strengthening effect caused by an elastic contrast - Part I: the bimaterial case10.1007/s10704-012-9787-y ↗
14. An attempt to extend the 2D coupled criterion for crack nucleation in brittle materials to the 3D case10.1016/j.tafmec.2014.05.004 ↗
15. Strength prediction of bonded assemblies using a coupled criterion under elastic assumptions: effect of material and geometrical parameters10.1016/j.ijadhadh.2013.09.044 ↗
16. FEM stress analysis and strength prediction of scarf adhesive joints under static bending moments10.1016/j.ijadhadh.2013.02.010 ↗
17. Three-dimensional FEM stress analysis and strength prediction of scarf adhesive joints with similar adherends subjected to static tensileloadings10.1016/j.ijadhadh.2014.05.006 ↗
18. Bond failure of a SiC/SiC brazed assembly10.1016/j.mechmat.2012.03.001 ↗
19. A model for brittle failure in adhesive lap joints of arbitrary joint configuration10.1016/j.compstruct.2015.07.100 ↗
20. Adhesive tensile strengths of scarf and butt joints of steel plates: 2nd report, relation between mechanical properties of adhesive and fracture criteria of joints10.1299/jsme1958.28.2575 ↗
21. Nonlinear crack opening integral: mode mixity for finite cracks10.1016/j.engfracmech.2017.10.006 ↗
22. A review of Finite Fracture Mechanics: crack initiation at singular and non-singular stress raisers10.1007/s00419-015-1091-7 ↗