Grouting Additives and Information-Based Construction of Jet Grouting in the Water-Rich Sand Stratum

The dynamic action of groundwater in the water-rich sand stratum carries away injected cement slurry before it becomes solidified, which seriously affects the determination of the diameter and strength of the column. Grouting additives and information-based construction are two main actions to control the quality of jet grouting construction. This study introduced a solution of grouting additives and information-based construction of jet grouting in the water-rich sand stratum. First, high-polymer cement grout (HPCG), red mud and phosphogypsum cement grout (RPCG) and metakaolin cement grout (MKCG) additives were screened with a series of laboratory tests on solidification time and permeability; moreover, the mix proportion of grouting fluids was developed in order to adapt for water-rich sand strata. Secondly, information-based construction of jet grouting was conducted to control grouting quantity with real-time monitoring of drill rotational velocity, drill lifting speed and injection pressure equipped with the monitoring system on the double fluid jet grouting systems. Lastly, the validity of grouting additives and information-based construction in the water-rich sand stratum was verified via a test pile in situ, and a series of material tests on drilling core samples on permeability with SEM observation. The results indicate that the high polymer is the preferred additive of grouting fluids because the solidification time can be controlled in the range of 10 min to 20 min; the permeability of drilling core samples can reach the order of 10−7, with the mix proportion being A:B = 2:1, high-polymer additive:water > 1:3, with a water-cement ratio of 0.8. The specifications of information-based construction are a drill rotational velocity of 10 r/min, a drill lifting speed of 0.2 m/min, an injection pressure of 20 MPa and a grouting quantity of 40 L/min.