The Sonic Resonance Method and the Impulse Excitation Technique: A Comparison Study
Source abstract
Abstract
In this study, resonant frequencies of flexurally vibrating samples were measured using the sonic resonant method (SRM) and the impulse excitation technique (IET) to assess the equivalency of these two methods. Samples were made from different materials and with two shapes (prism with rectangular cross-section and cylinder with circular cross-section). The mean values and standard deviations of the resonant frequencies were compared using the t-test and the F-test. The tests showed an equivalency of both methods in measuring resonant frequency. The differences between the values measured using SRM and IET were not significant. Graphically, the relationship between the resonant frequencies is a line with a slope of 0.9993 ≈ 1.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Acoustic Wave Phenomena Research · Structural Health Monitoring Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Physics, Faculty of Natural Sciences, Constantine the Philosopher University in Nitra, Tr. A. Hlinku 1, 94974 Nitra, Slovakia
Department of Materials Engineering and Chemistry, Faculty of Civil Engineering, Czech Technical University in Prague, Thákurova 7, 16629 Prague, Czech Republic
Funding
Czech Technical Uuniversity in Prague
References (35)
Show source-provided references
1. Comparative study of dynamic and static Young’s modulus of concrete containing basaltic aggregates
2. Determination of Young’s modulus by specific vibration of basalt and diabase10.1155/2020/4706384 ↗
3. Temperature dependence of the dynamic Young’s modulus of ZrB2-MoSi2 ultra-refractory ceramic composites10.1016/j.scriptamat.2010.02.011 ↗
4. Glass microstructure evaluations using high temperature mechanical spectroscopy measurements10.1016/S0022-3093(02)01946-4 ↗
5. Investigating relaxation of glassy materials based on natural vibration of beam: A comparative study of borosilicate and chalcogenide glasses10.1016/j.jnoncrysol.2018.07.071 ↗
6. Mechanical properties of alumina foam/tri-functional epoxy resin composites with an interpenetrating network structure10.1515/amm-2015-0444 ↗
7. Comparison of different experimental techniques for determination of elastic properties of solids10.1016/j.msea.2003.09.080 ↗
8. Determination of Young’s modulus for spruce, fir and isotropic materials by the resonance flexure method with comparisons to static flexure and other dynamic methods10.1007/BF00229348 ↗
9. Kashtaljan, J.A. (1970). Elastic Characteristics of Materials at High Temperatures, Naukova Dumka. (In Russian).
10. Schreiber, E., Anderson, O., and Soga, N. (1974). Elastic Constants and Their Measurement, McGraw-Hill Book Co.
11. ASTM C 1259-15 (2015). Standard Test Method for Dynamic Young’s Modulus, Shear Modulus and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration, ASTM International.
12. ASTM E1875-13 (2013). Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio by Sonic Resonance, ASTM International.
13. Determination of Young’s modulus of ceramics from flexural vibration at elevated temperatures10.3813/AAA.918380 ↗
14. A novel resonant beam technique to determine the elastic moduli in dependence on orientation and temperature up to 2000 °C10.1063/1.1149867 ↗
15. A system for measurement of dynamical modulus of elasticity at high temperatures
16. Impulse excitation apparatus to measure resonant frequencies, elastic moduli and internal friction at room and high temperature10.1063/1.1148422 ↗
17. Uncertainty in the determination of Young’s modulus of ceramics using the impulse excitation technique at elevated temperatures10.3813/AAA.919169 ↗
18. Measurement of elastic moduli from the impact sound of engineering ceramics and composites at elevated temperatures10.1111/j.1151-2916.1995.tb09080.x ↗
19. Miloserdin, J.V., and Baranov, V.M. (1978). High-Temperature Testing of Reactor Materials, Atomizdat. (In Russian).
20. Impulse excitation technique for dynamic flexural measurements at moderate temperature10.1063/1.1139761 ↗
21. Equations for the flexural vibration of a sample with a uniform cross-section
22. Improved frequency equations for calculating the Young’s modulus of bars of rectangular or circular cross section from their flexural resonant frequencies10.1520/JAI102953 ↗
23. An alternative equation of the flexural vibration
24. A comparison of two test methods for measuring Young’s modulus of building materials
25. Dowdy, S., and Wearden, S. (1983). Statistics for Research, John Willey & Sons.
26. Linczényi, A. (1973). Engineering Statistics, Alfa. (In Slovak).
27. Effect of interfacial reaction on Young’s modulus in CNT/Al nanocomposite: A quantitative analysis10.1016/j.matchar.2018.01.024 ↗
28. Mechanical properties and microstructure of additively manufactured stainless steel with laser welded joints10.1016/j.matdes.2021.109921 ↗
29. Qiu, H., Ueji, R., Kimura, Y., and Inoue, T. (2021). Grain-to-grain interaction effect in polycrystalline plain low-carbon steel within elastic deformation region. Materials, 14.10.3390/ma14081865 ↗
30. The Influence of texture on elastic and thermophysical properties of kaolin- and illite-based ceramic bodies10.1016/j.ceramint.2016.11.100 ↗
31. Influence of firing temperature and compacting pressure on density and Young’s modulus of electroporcelain10.1063/1.5047595 ↗
32. Development of Young’s modulus of the green alumina porcelain raw mixture
33. A universal function for the description of nanoindentation unloading data: Case study on soda-lime glass10.1016/j.jnoncrysol.2020.120067 ↗
34. Young’s modulus of corundum ceramics sintered from powders with a core-shell structure synthesized by iodine transport10.1007/s11148-019-00376-0 ↗
35. Measurement of Young’s modulus and residual stress of thin SiC layers for MEMS high temperature applications10.1007/s00542-011-1419-3 ↗