journal article·2021-09-14Open access

Property Analysis of Photo-Polymerization-Type 3D-Printed Structures Based on Multi-Composite Materials

So-Ree Hwang, Min-Soo Park

Applied Sciences· Volume 11· Issue 18

Abstract

Additive manufacturing, commonly called 3D printing, has been studied extensively because it can be used to fabricate complex structures; however, polymer-based 3D printing has limitations in terms of implementing certain functionalities, so it is limited in the production of conceptual prototypes. As such, polymer-based composites and multi-material 3D printing are being studied as alternatives. In this study, a DLP 3D printer capable of printing multiple composite materials was fabricated using a movable separator and structures with various properties were fabricated by selectively printing two composite materials. After the specimen was fabricated based on the ASTM, the basic mechanical properties of the structure were compared through a 3-point bending test and a ball rebound test. Through this, it was shown that structures with various mechanical properties can be fabricated using the proposed movable-separator-based DLP process. In addition, it was shown that this process can be used to fabricate anisotropic structures, whose properties vary depending on the direction of the force applied to the structure. By fabricating multi-joint grippers with varying levels of flexibility, it was shown that the proposed process can be applied in the fabrication of soft robots as well.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · 3D Printing in Biomedical Research · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Graduate School of NID Fusion Technology, Seoul National University of Science and Technology, 232 Gongneung-ro, Nowon-gu, Seoul 01811, Korea

Department of Mechanical System Design Engineering, Seoul National University of Science and Technology, Seoul 01811, Korea

Funding

National Research Foundation of Korea

References (40)

Show source-provided references
1. Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditions10.1016/j.matdes.2014.02.038 ↗
2. Bimaterial 3D printing and numerical analysis of bio-inspired composite structures under in-plane and transverse loadings10.1016/j.compositesb.2016.09.083 ↗
3. Effect of processing conditions on the bonding quality of FDM polymer filaments10.1108/13552540810862028 ↗
4. 3D printing of textile-based structures by Fused Deposition Modelling (FDM) with different polymer materials
5. Dependence of mechanical properties of polyamide components on build parameters in the SLS process10.1016/j.jmatprotec.2006.09.007 ↗
6. 3D printing of anisotropic metamaterials10.2528/PIERL12070311 ↗
7. An overview of multifunctional epoxy nanocomposites10.1039/C6TC01210H ↗
8. Functionalized graphite nanoplatelets/epoxy resin nanocomposites with high thermal conductivity10.1016/j.ijheatmasstransfer.2015.08.081 ↗
9. Fast fabrication of epoxy-functionalized magnetic polymer core-shell microspheres using glycidyl methacrylate as monomer via photo-initiated miniemulsion polymerization10.1016/j.jmmm.2012.05.005 ↗
10. Enhancing aerospace engineering students’ learning with 3D printing wind-tunnel models10.1108/13552541111156522 ↗
11. A Review of Additive Manufacturing10.5402/2012/208760 ↗
12. Use of 3D printing by museums: Educational exhibits, artifact education, and artifact restoration10.1089/3dp.2015.0030 ↗
13. 3D bioprinting of tissues and organs10.1038/nbt.2958 ↗
14. 3D printing of polymer matrix composites: A review and prospective10.1016/j.compositesb.2016.11.034 ↗
15. Direct Conductive Patterning on 3D Printed Structure Using Laser10.1002/pssa.201700597 ↗
16. Shin, I., and Park, M. (2017). 3D printed conductive patterns based on laser irradiation. Phys. Status Solidi Appl. Mater. Sci., 214.10.1002/pssa.201600943 ↗
17. Property Analysis of Multi-Material Specimen based on ME Type 3D Printer10.7736/JKSPE.019.122 ↗
18. Fabrication of Conductive Patterns on 3D Printed Structure Using Photo-Polymerization Technology10.1002/pssa.201801017 ↗
19. 3D printed carbon-ceramic structures for enhancing photocatalytic properties10.1016/j.ceramint.2019.05.008 ↗
20. Tsai, M.J., Mei, C.W., Cheng, Y.L., Chen, F., Hu, Z.Y., and Huang, K.C. (2017, January 9–12). A study of a material jetting based color 3d printing system by using multiple piezoelectric heads. Proceedings of the 2017 International Conference on Machine Learning and Cybernetics, ICMLC, Ningbo, China.10.1109/ICMLC.2017.8108984 ↗
21. Experimental study of cavitating flow inside vertical multi-hole nozzles with different length-diameter ratios using diesel and biodiesel10.1016/j.expthermflusci.2014.09.015 ↗
22. Recent advances and developments in composite dental restorative materials10.1177/0022034510381263 ↗
23. Song, S.Y., Park, M.S., Lee, D., Lee, J.W., and Yun, J.S. (2019). Optimization and characterization of high-viscosity ZrO2 ceramic nanocomposite resins for supportless stereolithography. Mater. Des., 180.10.1016/j.matdes.2019.107960 ↗
24. Improvement of dispersion stability and 3D-printing characteristics of ceramics in photopolymers by controlling the coating thickness of silane coupling agents10.1016/j.matchemphys.2018.06.023 ↗
25. Song, S.Y., Park, M.S., Lee, J.W., and Yun, J.S. (2018). A study on the rheological and mechanical properties of photo-curable ceramic/polymer composites with different silane coupling agents for SLA 3D printing technology. Nanomaterials, 8.10.3390/nano8020093 ↗
26. Photopolymerization10.1016/0047-2670(84)85016-9 ↗
27. Multi-material stereolithography10.1016/j.jmatprotec.2010.10.003 ↗
28. Rapid multi-material 3D printing with projection micro-stereolithography using dynamic fluidic control
29. Cellulose nanocrystals support material for 3D printing complexly shaped structures via multi-materials-multi-methods printing
30. Multi-material 3D printing of a soft pressure sensor
31. Development of DLP 3D Printer with Multiple Composite Materials10.7736/JKSPE.019.128 ↗
32. 3D-printed monolithic SiCN ceramic microreactors from a photocurable preceramic resin for the high temperature ammonia cracking process10.1039/C9RE00201D ↗
33. D20-Committee (2017). Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials(ASTM D790-17), ASTM International.
34. D20-Committee (2001). Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams(ASTM D3574-01), ASTM International.
35. A digital light processing 3D printer for fast and high-precision fabrication of soft pneumatic actuators10.1016/j.sna.2018.02.041 ↗
36. Design of soft multi-material pneumatic actuators based on principal strain field10.1016/j.matdes.2019.108000 ↗
37. Design and fabrication in the loop of soft pneumatic actuators using fused deposition modelling10.1016/j.sna.2019.111556 ↗
38. Colored visual cryptography scheme based on additive color mixing10.1016/j.patcog.2008.03.031 ↗
39. Functionally Graded Composite Materials: An Overview10.1016/j.mspro.2014.07.442 ↗
40. Multiobjective optimization of functionally graded material plates with thermo-mechanical loading10.1016/j.compstruct.2018.09.098 ↗