Effect of carbon nanotubes on the strength of adhesive lap joints of C/C and C/C–SiC ceramic fibre composites
Source abstract
Abstract
Abstract Similar substrates of carbon/carbon (C/C) and carbon/carbon–silicon carbide (C/CSiC) composites were bonded with pure epoxy resin and the one containing 3% multiwall carbon nanotubes (MWCNTs). The results show that MWCNT/filled epoxy resin bonded C/CC/C and C/CSiCC/CSiC substrates have a higher adhesive joint strength than those bonded with epoxy resin alone. MWCNTs increase the toughness and strength of the epoxy resin, which increases the interface bond strength between two similar matching surfaces.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Influence of carbon nanotube reinforcement on the processing and the mechanical behaviour of carbon fibre/epoxy composites10.1016/j.carbon.2009.06.039 ↗
2. Fundamental aspects of nano-reinforced composites10.1016/j.compscitech.2005.01.014 ↗
3. Carbon nanotubes-reinforced epoxy composites-enhanced stiffness and fracture toughness at low nanotubes contents10.1016/j.compscitech.2004.04.002 ↗
4. Influence of different carbon nanotubes on the mechanical properties of epoxy matrix composites—a comparative study10.1016/j.compscitech.2005.04.021 ↗
5. On nanocomposites toughness10.1016/j.compscitech.2007.06.027 ↗
6. SWCNT as cure-induced stress sensors in epoxy nanocomposites10.4028/www.scientific.net/SSP.151.48 ↗
7. Fracture toughness and fatigue life of MWCNT/epoxy composites10.1016/j.msea.2008.04.051 ↗
8. The morphology of silicon carbide in C/C–SiC composites10.1016/S0921-5093(01)01719-1 ↗
9. Effect of oxidation on elastic modulus of C/C–SiC composites10.1016/j.msea.2007.09.078 ↗
10. Mechanical properties of silicon impregnated C/C composite material at elevated temperature10.1163/156855102321669208 ↗
11. The effects of processing variables on strength of carbon bonding between carbon/carbon composites10.1016/j.msea.2009.01.048 ↗
12. Effect of temperature and layer thickness on these strength of carbon bonding for carbon/carbon composites10.1016/j.carbon.2004.09.002 ↗
13. Brazing of carbon–carbon composites to Cu-clad molybdenum for thermal management applications10.1016/j.msea.2006.11.031 ↗
14. Moisture effects on the toughness, mode-I and mode-II of particles filled quasi-isotropic glass-fibre-reinforced polyester resin composites10.1023/A:1004305104964 ↗