journal article·2022-04-07Open access

Characterization in Relevant Icing Conditions of Two Superhydrophobic Coatings

Filomena Piscitelli

Applied Sciences· Volume 12· Issue 8

Abstract

The formation of ice can be very detrimental to flight safety, since the ice accumulated on the surfaces of the aircraft can alter both the aerodynamics and the weight, leading in some cases to catastrophic stall situations. To date, only active Ice Protection Systems (IPS), which require energy to work, are being employed. The use of passive coatings able to prevent, delay, or reduce ice accretion in real flight icing conditions can be viewed as a valuable instrument to reduce the environmental footprint of aircraft. The majority of work in the literature focuses on testing superhydrophobic coatings at a speed equal to or lower than 50 m/s or rather in combination with an active system. The present study was aimed at understanding the effectiveness of two superhydrophobic coatings applied on two NACA0015 wing profiles in reducing the ice formation in relevant flight icing conditions, through tests carried out in an Icing Wind Tunnel at 50 and 95 m/s and at temperatures ranging between −3 and −23 °C. Results demonstrated that at temperatures higher than −12 °C, at both 50 and 95 m/s, with exposure time ranging between 72 and 137 s, the developed coatings can be helpful in reducing the ice accretion by 12 to 100%.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Icing and De-icing Technologies · Surface Modification and Superhydrophobicity · Smart Materials for Construction

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials and Structures, CIRA–Italian Aerospace Research Centre, Via Maiorise, 1, 81043 Capua, Italy

Funding

Italian Ministry of University and Research

References (36)

Show source-provided references
1. Bio-Inspired Icephobic Coatings for Aircraft Icing Mitigation: A Critical Review10.7569/RAA.2020.097307 ↗
2. Schulz, M., and Sinapius, M. (2015). Evaluation of Different Ice Adhesion Tests for Mechanical Deicing Systems, SAE. SAE Technical Paper.10.4271/2015-01-2135 ↗
3. Development of high-efficient synthetic electric heating coating for anti-icing/de-icing10.1016/j.surfcoat.2018.06.011 ↗
4. Anti-icing propylene-glycol materials10.1016/j.eml.2021.101225 ↗
5. A survey of icephobic coatings and their potential use in a hybrid coating/active ice protection system for aerospace applications10.1016/j.paerosci.2019.01.002 ↗
6. Understanding the effect of superhydrophobic coatings on energy reduction in anti-icing systems10.1016/j.coldregions.2011.02.006 ↗
7. Design of anti-icing surfaces: Smooth, textured or slippery?10.1038/natrevmats.2015.3 ↗
8. Bio-Inspired Strategies for Anti-Icing10.1021/nn406522n ↗
9. Investigation of ice shedding properties of superhydrophobic coatings on helicopter blades10.1016/j.coldregions.2013.12.009 ↗
10. From superhydrophobicity to icephobicity: Forces and interaction analysis10.1038/srep02194 ↗
11. Anti-Icing Superhydrophobic Coatings10.1021/la902882b ↗
12. Frost formation and ice adhesion on superhydrophobic surfaces10.1063/1.3524513 ↗
13. Superhydrophobic surfaces cannot reduce ice adhesion10.1063/1.4752436 ↗
14. On ice-releasing properties of rough hydrophobic coatings10.1016/j.coldregions.2010.01.001 ↗
15. Superhydrophobic Surfaces: Are They Really Ice-Repellent?10.1021/la104277q ↗
16. Evaluation of icephobic coatings—Screening of different coatings and influence of roughness10.1016/j.apsusc.2013.06.073 ↗
17. Yeong, Y.H., Sokhey, J., and Loth, E. (2018). Ice Adhesion on Superhydrophobic Coatings in an Icing Wind Tunnel. Contamination Mitigating Polymeric Coatings for Extreme Environments, Springer.10.1007/12_2017_32 ↗
18. Mora, J., García, P., Muelas, R., and Agüero, A. (2020). Hard Quasicrystalline Coatings Deposited by HVOF Thermal Spray to Reduce Ice Accretion in Aero-Structures Components. Coatings, 10.10.3390/coatings10030290 ↗
19. Rivero, P.J., Rodriguez, R.J., Larumbe, S., Monteserín, M., Martín, F., García, A., Acosta, C., Clemente, M.J., García, P., and Mora, J. (2020). Evaluation of Functionalized Coatings for the Prevention of Ice Accretion by Using Icing Wind Tunnel Tests. Coatings, 10.10.3390/coatings10070636 ↗
20. Morita, K., Kimura, S., and Sakaue, H. (2020). Hybrid System Combining Ice-Phobic Coating and Electrothermal Heating for Wing Ice Protection. Aerospace, 7.10.3390/aerospace7080102 ↗
21. Villeneuve, E., Blackburn, C., and Volat, C. (2021). Design and Development of an Experimental Setup of Electrically Powered Spinning Rotor Blades in Icing Wind Tunnel and Preliminary Testing with Surface Coatings as Hybrid Protection Solution. Aerospace, 8.10.3390/aerospace8040098 ↗
22. Fortin, G., Adomou, M., and Perron, J. (2011). Experimental Study of Hybrid Anti-Icing Systems Combining Thermoelectric and Hydro-Phobic Coatings, SAE International.10.4271/2011-38-0003 ↗
23. (2020, December 22). EASA. Available online: https://www.easa.europa.eu/document-library/certification-specifications/cs-25-amendment-26-0.
24. Piscitelli, F. (2021). Rivestimento Superidrofobico e Ghiacciofobico di un Substrato, Metodo per il Suo Ottenimento e Substrato Così Rivestito. (N. IT102021000032444), Italian Patent Application.
25. (1996). Geometrical Product Specifications (GPS)–Surface Texture: Profile Method–Rules and Procedures for the As-sessment of Surface Texture (Standard No. ISO 4288:1996).
26. (2013). Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements (Standard No. D7490-13).
27. Estimation of the surface free energy of polymers10.1002/app.1969.070130815 ↗
28. Methods for the calculation of surface free energy of solids
29. Piscitelli, F., Chiariello, A., Dabkowski, D., Corraro, G., Marra, F., and Di Palma, L. (2020). Superhydrophobic Coatings as Anti-Icing Systems for Small Aircraft. Aerospace, 7.10.3390/aerospace7010002 ↗
30. On a simplified method to produce hydrophobic coatings for aeronautical applications10.1016/j.apsusc.2018.04.062 ↗
31. (2009). Standard Test Methods for Measuring Adhesion by Tape Test (Standard No. ASTM D3359–09).
32. (2017). Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings (Standard No. ASTM C633-13).
33. Facile preparation of superhydrophobic polymer surfaces10.1016/j.polymer.2012.01.053 ↗
34. Nanostructured superhydrophobic surfaces10.1007/s10853-005-2892-9 ↗
35. The Effect of Temperature on the Strength of Adhesively-Bonded Composite-Aluminium Joints10.1080/00218469308026585 ↗
36. Fortin, G., Ilinca, A., and Perron, J. (, January October). A study of Icing Events at Murdochville: Conclusions for the Wind Power Industry. Proceedings of the Quebec Premier Wind Energy Event, International Conference, Wind Energy Remote Regions, Magdalene Islands, QC, Canada.