Preparation and characterization of green adhesives using modified tannin and hyperbranched poly (amine-ester)
Source abstract
Abstract
Abstract Tannin-glyoxalated Kraft lignin (TGKL) resin is a successful substitution for phenol formaldehyde resin in the production of wood adhesives, however it has a poor water resistance. To overcome this obstacle, this research was focused on scalable adhesive through the modified tannin adhesive and oligomeric precursors of a hyperbranched poly (amine-ester) (HBPAE). The prepared glyoxalated Kraft lignin resin (MTGKL), TGKL, HBPAE and commercial phenol formaldehyde (CPF) resin were evaluated by FTIR, 1H and 13C NMR spectroscopy. The tensile strengths and thermal stability were determined. The results indicated that the addition of HBPAE to tannin adhesive could improve the water resistance of MTGKL. This was evident when soaking plywood bonded with TGKL in cool water, where delamination occurred, but it was not evident with MTGKL. The tensile results indicated that the adhesive strengths of MTGKL, 39.72 MPa (dry) and 27.62 MPa (wet), were higher compared to TGKL and CPF resins.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Lignin and Wood Chemistry · Polymer composites and self-healing · Dyeing and Modifying Textile Fibers
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Structure buildup in hyperbranched polymers from 2,2-bis(hy-droxymethyl) propionic acid10.1021/ma991100w ↗
2. Preparation and characterization of hyperbranched polyesteramides10.1007/s00289-007-0884-4 ↗
3. Khan · Biomacromolecules · 2006 · 7 · 138610.1021/bm050999o ↗
4. Statistically branched dendritic polymers
5. Dendritic core–shell macromolecules soluble in supercritical carbon dioxide10.1021/ma0607315 ↗
6. Models for randomly hyperbranched polymers: theory and simulation
7. Flavonoid compounds
8. Development and characterization of a wood adhesive using bagasse lignin10.1016/j.ijadhadh.2004.01.003 ↗
9. Hot-setting tannin-urea-formaldehyde exterior wood adhesives
10. Developing lignin-based resin coatings and composites10.1016/j.indcrop.2007.07.021 ↗
11. Kim · Bioresour Technol · 2009 · 100 · 74410.1016/j.biortech.2008.06.062 ↗
12. Kim · J Adhes Sci Technol · 2003 · 17 · 136910.1163/156856103769172797 ↗
13. Trosa A, Pizzi A. Holz als Roh-und Werkst 2001; 59 (40), pp. 266–271.10.1007/s001070100200 ↗
14. Lu · Acta Polym Sin · 2000 · 4 · 411
15. Synthesis of functionalized carbon nanotubes by hyperbranched poly(amine-ester) with liquid like behavior at room temperature10.1016/j.polymer.2009.04.042 ↗
16. Pichelin · Prod J · 2006 · 56 · 31
17. Characterization of lignin precipitated from the soda black liquor of oil palm empty fruit bunch fibers by various mineral acids10.29037/ajstd.92 ↗
18. Lin · 1992
19. Study of chemical modification of alkaline lignin by the glyoxalation reaction10.15376/biores.6.4.4523-4536 ↗
20. Low formaldehyde emitting biobased wood adhesives manufactured from mixtures of tannin and glyoxylated lignin10.1163/156856111X618489 ↗
21. Sarkanen · 1987
22. Eucalyptus bark lignin substituted phenol formaldehyde adhesives: a study on optimization of reaction parameters and characterization10.1002/app.20374 ↗
23. Infrared spectroscopy study of baggase and unbleached high-yield soda baggase pulps (cotton cellulose, seed pulp, ground wood pulp and paper, lignin)10.1515/hfsg.1980.34.6.218 ↗
24. Characterization of a novolac resin substituting phenol by ammonium lignosulfonate as filler or extender10.15376/biores.2.2.270-283 ↗
25. Effect of alkalinity on the structure of phenol-formaldehyde resol resins10.1002/app.1846 ↗
26. Proton magnetic resonance study on the structure of phenol-formaldehyde resins
27. Phenol formaldehyde resol resin studied by 13C NMR spectroscopy, gel permeation chromatography, and differential scanning calorimetry10.1002/(SICI)1097-4628(19971107)66:6<1183::AID-APP18>3.0.CO;2-2 ↗
28. Phenol-formaldehyde resin curing and bonding in steam-injection pressing. I. Resin synthesis, characterization, and cure behavior10.1002/app.1991.070430203 ↗
29. Performance of flakeboard bonded with three phenol-formaldehyde resins of different mole ratios and molecular weights
30. Gabilondo · 2004
31. Physico-chemical characterization of lignins from different sources for use in phenol–formaldehyde resin synthesis10.1016/j.biortech.2006.05.042 ↗
32. Physicochemical characterization of alkaline and ethanol organosolv lignins from oil palm (Elaeis guineensis) fronds as phenol substitutes for green material applications10.1016/j.indcrop.2013.04.030 ↗
33. A novel thermal degradation mechanism of phenol-formaldehyde type resins
34. Thermal degradation of polymers. 2. mass spectrometric thermal analysis of phenol-formaldehyde polycondensates10.1002/app.1966.070100407 ↗
35. Thermal analysis of polymers10.1351/pac198961081353 ↗
36. British Standard. Specification for bond performance of veneer plywood. London 9, 1985; p. part 8.