Study on surface grafting of hydroxyapatite and its influence on the properties of urea-formaldehyde resin
Source abstract
Abstract
Urea formaldehyde (UF) is the most widely used resin in the wood composite board industry. UF has formaldehyde emission, which is harmful to the environment and human health. In this paper, hydroxyapatite (HAP) was surface modified by silane coupling agent (HAP-KH). And hydroxyapatite/urea formaldehyde resin (HAP-UF) was prepared by adding different amounts of HAP-KH. The optimal amount of HAP-KH was determined by wet shear strength and formaldehyde release. The degradation performance and degradation kinetics of the resin were also studied. The results show that the addition of HAP-KH can improve the wet shear strength of plywood and reduce the release of formaldehyde. The optimal content of HAP-KH was 3%, and the formaldehyde emission of plywood reached the lowest level of 0.35 mg L −1 , 52.32% lower than that of the control resin. The wet shear strength was 1.14 MPa, 14.4% higher than that of the control resin. HAP-KH had no significant effect on the thermal stability of UF resins. However, HAP-KH has a significant effect on the thermal degradation mechanism of UF resins. The most likely kinetics mechanism models for UF and HAP-UF are G(a) = [−ln(1−α)] 2 and G(a) = [−ln(1−α)] 3, respectively.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer Synthesis and Characterization · Thermal and Kinetic Analysis · Photopolymerization techniques and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Derivative thermogravimetric analysis curve for characterizing the curing process of urea-formaldehyde resins10.1016/j.ijadhadh.2022.103184 ↗
2. Urea–formaldehyde (UF) adhesive resins for wood10.1016/S0143-7496(97)00054-7 ↗
3. Introduction to special issue: wood adhesives: past, present, and future
4. Utilization of carbon black from Mao bamboo as reinforcing agent for melamine urea formaldehyde resin wood adhesive10.1016/j.indcrop.2022.115373 ↗
5. Sulfonated Kraft lignin addition in urea–formaldehyde resin10.1007/s10973-019-08075-1 ↗
6. Potential use of wollastonite as a filler in UF resin based medium-density fiberboard (MDF)10.3390/polym12071435 ↗
7. Unexpected role of amphiphilic lignosulfonate to improve the storage stability of urea formaldehyde resin and its application as adhesives10.1016/j.ijbiomac.2020.06.135 ↗
8. Water resistance evaluation of a MFU resins with different molar ratio catalyzed with citric acid10.1016/j.ijadhadh.2021.103020 ↗
9. Decreasing formaldehyde emission from medium density fiberboard panels produced by adding different amine compounds to urea formaldehyde resin10.1016/j.ijadhadh.2011.06.011 ↗
10. 13C-NMR study on the structure of phenol-urea-formaldehyde resins prepared by methylolureas and phenol10.1002/app.29532 ↗
11. Pyrolysis of melamine–formaldehyde and urea–formaldehyde resins10.1002/app.1991.070421208 ↗
12. Thermal behaviour of melamine-modified urea–formaldehyde resins10.1007/s10973-009-0617-z ↗
13. Influence of the melamine content in melamine-urea-formaldehyde resins on formaldehyde emission and cured resin structure10.1007/BF00767897 ↗
14. A novel design for nanocellulose reinforced urea–formaldehyde resin: a breakthrough in amino resin synthesis and biocomposite manufacturing10.1007/s10570-021-03739-4 ↗
15. Application of surface chemical functionalized cellulose nanocrystals to improve the performance of UF adhesives used in wood based composites - MDF type10.1016/j.carbpol.2018.10.115 ↗
16. Addition of cellulose nanofibers extracted from rice straw to urea formaldehyde resin; effect on the adhesive characteristics and medium density fiberboard properties10.1016/j.ijadhadh.2020.102582 ↗
17. The effect of soda bagasse lignin modified by ionic liquids on properties of the urea-formaldehyde resin as a wood adhesive10.1080/00218464.2016.1188284 ↗
18. Improving urea formaldehyde resin properties by glyoxalated soda bagasse lignin10.1007/s00107-014-0850-4 ↗
19. Synthesis, characterization and thermal analysis of urea–formaldehyde/nanoSiO2 resins10.1016/j.tca.2011.10.007 ↗
20. Preparation and properties of the urea-formaldehyde res-in/reactive halloysite nanocomposites adhesive with low-formaldehyde emission and good water resistance10.3390/polym13142224 ↗
21. Modification of nanoclay with different methods and its application in urea-formaldehyde bonded plywood panels
22. Effects of nanoclay as a reinforcement filler on the physical and mechanical properties of wood-based composite10.1177/0021998309340936 ↗
23. Recent developments in the performance of micro/nanoparticle-modified urea-formaldehyde resins used as wood-based composite binders: a review10.1016/j.ijadhadh.2022.103106 ↗
24. Effects of nanoclay as a reinforcement filler on the physical and mechanical properties of wood-based composite10.1177/0021998309340936 ↗
25. Morphology and mechanical properties of polyamide/clay nanocomposites toughened with NBR/NBR-g-GMA: a comparative study10.1016/j.compositesb.2015.12.042 ↗
26. Preparation and characterization of bionanocomposites based on benzylated wheat straw and nanoclay10.1007/s10924-017-0997-2 ↗
27. Formation and properties of nanocomposites made up from solid aspen wood, melamine-urea-formaldehyde, and clay10.1515/HF.2007.027 ↗
28. Influence of nanoclay on urea-formaldehyde resins for wood adhesives and its model10.1002/app.28359 ↗
29. Converting crystalline thermosetting urea–formaldehyde resins to amorphous polymer using modified nanoclay10.1016/j.jiec.2020.03.014 ↗
30. Thermal and mechanical properties of urea-formaldehyde (UF) resin combined with multiwalled carbon nanotubes (MWCNT) as nanofiller and fiberboards prepared by UF-MWCNT10.1515/hf-2014-0038 ↗
31. Effects of adding multiwall carbon nanotubes on performance of polyvinyl acetate and urea-formaldehyde adhesives in tropical timber species10.1155/2015/895650 ↗
32. The reduction of adhesive application in plywood manufacturing by using nanocellulose reinforced urea-formaldehyde resin10.1002/app.49834 ↗
33. Modified nanocrystalline cellulose from two kinds of modifiers used for improving formaldehyde emission and bonding strength of urea-formaldehyde resin adhesive10.15376/biores.6.4.4430-4438 ↗
34. Particulate reinforcement and formaldehyde adsorption of modified nanocrystalline cellulose in urea-formaldehyde resin adhesive10.1080/01694243.2012.727173 ↗
35. Effect of addition of microfibrillated cellulose to urea-formaldehyde on selected adhesive characteristics and distribution in particle board10.1007/s10570-015-0818-5 ↗
36. Preparation and characterization of spherical β-cyclodextrin/urea–formaldehyde microcapsules modified by nano-titanium oxide10.1039/C6RA27895G ↗
37. Curing behavior of epoxy/Fe3O4 nanocomposites: a comparison between the effects of bare Fe3O4, Fe3O4/SiO2/chitosan and Fe3O4/SiO2/chitosan/imide/phenylalanine-modified nanofillers10.1016/j.porgcoat.2018.06.006 ↗
38. Synthesis, characterization and thermal analysis of urea–formaldehyde/nanoSiO2 resins10.1016/j.tca.2011.10.007 ↗
39. Improving some of applied properties of oriented strand board (OSB) made from underutilized low quality paulownia (Paulownia fortunie) wood employing nano-SiO210.1016/j.indcrop.2012.05.010 ↗
40. Alumina nanoparticles as formaldehyde scavenger for urea-formaldehyde resin: rheological and in-situ cure performance10.1016/j.compositesb.2019.107281 ↗
41. Bioinspired mineral–organic hybridization strategy to produce a green high performance soybean meal based adhesive10.1016/j.jclepro.2021.126939 ↗
42. TG-FTIR study on urea-formaldehyde resin residue during pyrolysis and combustion10.1016/j.jhazmat.2009.08.070 ↗
43. Kinetics and mechanisms of coal oxidation mass gain phenomenon by TG–FTIR and in situ IR analysis10.1007/s10973-017-6916-x ↗
44. Thermal degradation kinetics of urea–formaldehyde resins modified by almond shells10.1021/acsomega.1c03896 ↗
45. Using the Friedman method to study the thermal degradation kinetics of photonically cured electrically conductive adhesives10.1007/s10973-014-4195-3 ↗
46. ICTAC Kinetics Committee recommendations for performing kinetic computations on thermal analysis data10.1016/j.tca.2011.03.034 ↗
47. ICTAC Kinetics Committee recommendations for collecting experimental thermal analysis data for kinetic computations10.1016/j.tca.2014.05.036 ↗
48. Sample controlled thermal analysis and kinetics10.1007/s10973-005-0609-6 ↗
49. Kinetic parameters from thermogravimetric data10.1038/201068a0 ↗
50. Materials produced from plant biomass: Part I: evaluation of thermal stability and pyrolysis of wood10.1590/S1516-14392010000300016 ↗
51. Pyrolysis of high ash sewage sludge: kinetics and thermodynamic analysis using Coats-Redfern method10.1016/j.renene.2018.07.094 ↗
52. Thermal decomposition of wood: kinetics and degradation mechanisms10.1016/j.biortech.2012.08.133 ↗
53. Thermodynamics and kinetics parameters of co-combustion between sewage sludge and water hyacinth in CO2/O2 atmosphere as biomass to solid biofuel10.1016/j.biortech.2016.06.133 ↗
54. Biomass pyrolysis kinetics: a comparative critical review with relevant agricultural residue case studies10.1016/j.jaap.2011.01.004 ↗
55. Kinetics and thermodynamic analysis of recent and ancient BuriedPhoebe zhennan wood10.1021/acsomega.0c02395 ↗
56. FTIR, XRD, SEM and solid state NMR investigations of carbonate-containing hydroxyapatite nano-particles synthesized by hydroxide-gel technique10.1016/S0022-3697(02)00257-3 ↗
57. Synthesis and characterization of hydroxyapatite using ammonium hydroxide and ethylenediaminetetraacetic acid10.1002/bkcs.10343 ↗
58. Surface modification of nanocrystalline hydroxyapatite10.1049/mnl.2010.0187 ↗
59. A surface modification ofpolylactic acid composites for additive manufacturing with modified choppedcarbon fiber and modifiednano‐hydroxyapatite10.1002/pc.26903 ↗
60. Testing by fourier transform infrared species variation during melamine–urea–formaldehyde resin preparation10.1002/app.26757 ↗
61. Water-borne melamine–formaldehyde-cured epoxy–acrylate corrosion resistant coatings10.1002/app.27022 ↗
62. Practical continuous resolution of α-amino-ε-caprolactam by diastereomeric salt formation using a single resolving agent with a solvent switch method10.1016/j.tetasy.2003.09.047 ↗
63. Thermal behavior of modified urea–formaldehyde resins10.1007/s10973-010-1143-8 ↗
64. Urea-formaldehyde resins characterized by thermal analysis and FTIR method10.1007/s10973-007-8731-2 ↗
65. TG-FTIR study on urea-formaldehyde resin residue during pyrolysis and combustion10.1016/j.jhazmat.2009.08.070 ↗