Influence of Numerical Aperture on Molten Area Formation in Fusion Micro-Welding of Glass by Picosecond Pulsed Laser
Source abstract
Abstract
Focusing condition such as numerical aperture (N.A.) has a great influence on the creation of molten area and the stable welding process in fusion micro-welding of glass. In this study, a picosecond pulsed laser of 1064 nm in wavelength and 12.5 ps in pulse duration was tightly focused inside a borosilicate glass using objective lenses of numerical apertures 0.45, 0.65, and 0.85 with spherical aberration correction. Influence of numerical aperture on molten area formation was experimentally investigated through analysis of focusing situation in glass, and movement of absorption point, and then molten area characteristics were discussed. It is concluded that N.A. of 0.65 with superior focusing characteristics can form a large and continuous molten area without cracks, which enables achievement of stable joining of glass material by picosecond pulsed laser.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Laser Material Processing Techniques · Ocular and Laser Science Research · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Graduate School of Natural Science and Technology, Okayama University, 3-1-1 Tsushimanaka, Kita-ku, Okayama 700-8530, Japan
Kataoka Corporation, 2-14-27 Shinyokohama, Kohoku-ku, Yokohama 222-0033, Japan
Funding
Japan Society for the Promotion of Science · Amada Foundation
References (30)
Show source-provided references
1. Glasses as engineering materials: A review10.1016/j.matdes.2010.11.057 ↗
2. Fusion welding of glass using femtosecond laser pulses with high-repetition rates10.2961/jlmn.2007.01.0011 ↗
3. Evaluation of molten zone in micro-welding of glass by picosecond pulsed laser10.2961/jlmn.2013.01.0013 ↗
4. Darrin, A.G., and Osiander, R. (2011). MEMS Packaging Materials, Springer.10.1007/978-0-387-47318-5_12 ↗
5. Femtosecond laser three-dimensional micro- and nanofabrication10.1063/1.4904320 ↗
6. Sample preparation method for glass welding by ultrashort laser pulses yields higher seam strength10.1364/AO.50.001941 ↗
7. Glass-to-glass anodic bonding with standard IC technology thin films as intermediate layers10.1016/S0924-4247(99)00376-3 ↗
8. Optical contact and Van Der Waals interactions: The role of the surface topography in determining the bonding strength of thick glass plates10.1088/1464-4258/3/1/314 ↗
9. Low temperature wafer anodic bonding10.1088/0960-1317/13/2/308 ↗
10. Welding of transparent materials using femtosecond laser pulses10.1143/JJAP.44.L687 ↗
11. Femtosecond filamentation in transparent media10.1016/j.physrep.2006.12.005 ↗
12. Ultrastable bonding of glass with femtosecond laser bursts10.1364/AO.52.001149 ↗
13. Space-selective laser joining of dissimilar transparent materials using femtosecond laser pulses10.1063/1.2221393 ↗
14. Bonding of glass with femtosecond laser pulses at high repetition rates10.1007/s00339-011-6369-1 ↗
15. Micromachining bulk glass by use of femtosecond laser pulses with nanojoule energy10.1364/OL.26.000093 ↗
16. Numerical aperture dependence of damage and supercontinuum generation from femtosecond laser pulses in bulk fused silica10.1364/JOSAB.23.002317 ↗
17. Photowritten optical waveguides in various glasses with ultrashort pulse laser10.1063/1.120327 ↗
18. Internal modification of glass by ultrashort laser pulse and its application to microwelding10.1007/s00339-013-8115-3 ↗
19. Effect of focusing condition on molten area characteristics in micro-welding of borosilicate glass by picosecond laser10.1007/s00339-016-0026-7 ↗
20. A first order model for computation of laser-induced breakdown thresholds in ocular and aqueous media: Part II comparison to experiment10.1109/3.477754 ↗
21. Mechanism of dynamic plasma motion in internal modification of glass by fs-laser pulses at high pulse repetition rate10.1364/OE.24.025718 ↗
22. Evaluation of nonlinear absorptivity in internal modification of bulk glass by ultrashort laser pulses10.1364/OE.19.010714 ↗
23. Effects of spherical aberrations on micro welding of glass using ultra short laser pulses10.1016/j.phpro.2012.10.074 ↗
24. (2019, April 03). Schott North America, Inc.. Available online: https://www.us.schott.com/d/advanced_optics/4ec11ab4-e634-4b8a-88b5-7d86f9f9da1b/schott-glass-wafer-specification-english-us-26062018.pdf.
25. Influence of the pulse duration in the ps-regime on the ablation efficiency of metals10.1016/j.phpro.2011.03.118 ↗
26. Laser ablation and micromachining with ultrashort laser pulses10.1109/3.631270 ↗
27. Femtosecond, picosecond and nanosecond laser ablation of solids10.1007/BF01567637 ↗
28. Hecht, E. (2001). Optics, Addison-Wesley. [4th ed.].
29. Novel micro-welding of silicon and glass by ultrashort pulsed laser10.4028/www.scientific.net/MSF.783-786.2792 ↗
30. Arai, T. (2013). Fundamental Engineering Science for Laser Materials Processing, Maruzen Publishing.