Creep damage laws for bonded joints under pure mode II loading
Source abstract
Abstract
Adhesively bonded joints have played an important role in several industries, mainly in automotive and aeronautics. A wide range of studies have been presented on the evaluation of the static behaviour of bonded joints, considering pure modes I and II, but also mixed-mode I + II loading. More recently, some developments have been done on the analysis of fatigue loading in this type of structural elements, introducing the importance of studying damage cohesively, along a determined period of time. As fatigue loading, creep loading can provide a significant contribution in terms of damage during the lifetime of a given bonded joint. Few studies were presented in the literature, regarding creep loading in bonded joints, so that a cohesive model capable of predicting the corresponding mechanical behaviour is needed. Twelve damage laws were postulated in this study, being used in a new cohesive zone model, predicting the creep behaviour of bonded joints under pure mode II loading. The corresponding implementation was proved, after an in-depth parametric analysis. The presented study constitutes a basis for future developments on the cohesive damage modelling of bonded joints, considering mixed-mode I + II loading scenarios.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Fatigue and fracture mechanics · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. A history of adhesive bonding
2. Aerospace industry application of adhesive bonding
3. A cohesive zone model for fatigue and creep-fatigue crack growth in single crystal superalloys10.1016/j.ijfatigue.2008.11.002 ↗
4. Numerical simulations of adhesively-bonded beams failing with extensive plastic deformation10.1016/S0022-5096(98)00101-X ↗
5. On the effective constitutive properties of a thin adhesive layer loaded in peel10.1007/s10704-006-0075-6 ↗
6. Crack equivalent concept applied to the fracture characterization of bonded joints under pure mode I loading10.1016/j.compscitech.2008.04.003 ↗
7. Pure mode II fracture characterization of composite bonded joints10.1016/j.ijsolstr.2008.12.001 ↗
8. Mixed-mode I+II fracture characterisation of composite bonded joints10.1080/01694243.2019.1708645 ↗
9. Environmental degradation of the interfacial fracture energy in an adhesively bonded joint10.1016/S0013-7944(02)00004-8 ↗
10. Mode I fracture toughness of an adhesively bonded composite composite joint in a cryogenic environment10.1016/j.compscitech.2006.08.026 ↗
11. Temperature dependence of cohesive laws for an epoxy adhesive in mode I and mode II loading10.1007/s10704-013-9887-3 ↗
12. Effect of temperature on pure modes I and II fracture behavior of composite bonded joints10.1016/j.compositesb.2016.04.022 ↗
13. Effect of moisture on pure mode I and II fracture behaviour of composite bonded joints10.1016/j.ijadhadh.2016.01.010 ↗
14. Influence of adverse temperature and moisture conditions on the fracture behaviour of single-strap repairs of carbon-epoxy laminates10.1016/j.ijadhadh.2019.102452 ↗
15. Predicting fatigue damage in adhesively bonded joints using a cohesive zone model10.1016/j.ijfatigue.2009.12.013 ↗
16. A procedure for the simulation of fatigue crack growth in adhesively bonded joints based on the cohesive zone model and different mixed-mode propagation criteria10.1016/j.engfracmech.2011.02.004 ↗
17. Mixed-mode fatigue crack growth and life prediction of an automotive adhesive bonding system10.1016/j.engfracmech.2017.11.004 ↗
18. A simple strategy to perform mixed-mode I+II fatigue/fracture characterisation of composite bonded joints10.1016/j.ijfatigue.2022.106723 ↗
19. Characterisation of composite bonded single-strap repairs under fatigue loading10.1016/j.ijmecsci.2015.09.001 ↗
20. High-cycle fatigue analysis of adhesively bonded composite scarf repairs10.1016/j.compositesb.2020.107900 ↗
21. Creep damage laws for bonded joints under pure mode I loading10.1016/j.tafmec.2024.104346 ↗
22. A customized shear traction separation law for cohesive zone modelling of creep loaded ENF adhesive joints10.1016/j.tafmec.2022.103336 ↗
23. Findley · 1976
24. A damage-based cohesive zone model of intergranular crack growth in a nickel-based superalloy10.1177/1056789512468917 ↗
25. Cohesive zone modeling of creep–fatigue crack propagation with dwell time10.1177/1687814017721144 ↗
26. Comparative analysis of the sin-hyperbolic and Kachanov-Rabotnov creep-damage models10.1016/j.ijpvp.2019.02.001 ↗
27. Rabotnov · 1969
28. Computational methods for creep fracture analysis by damage mechanics
29. A continuum damage mechanics (CDM) based Wilshire model for creep deformation, damage, and rupture prediction10.1016/j.msea.2020.140231 ↗
30. Interface element including point-to-surface constraints for three-dimensional problems with damage propagation10.1108/02644400010308053 ↗
31. A novel strategy to obtain the fracture envelope under mixed-mode I+II loading of composite bonded joints10.1016/j.engfracmech.2020.107032 ↗
32. Assessment of the creep life of adhesively bonded joints using the end notched flexure samples10.1016/j.engfailanal.2021.105969 ↗