Effects of Machining Induced Residual Shear and Normal Stresses on Fatigue Life and Stress Intensity Factor of Inconel 718
Source abstract
Abstract
Residual shear stresses and normal stresses induced by machining affect the fatigue performance of components. Thus, residual shear and normal stresses should be considered simultaneously when evaluating the influence of residual stress on fatigue performance. In the present paper, the influences of residual shear and normal stresses on the fatigue life and stress intensity factor (SIF) of turned Inconel 718 were investigated. Firstly, the cos α measurement method was utilized to calculate the residual shear stress and residual normal stress of turned Inconel 718. Then, the combined effects of residual shear and normal stresses on fatigue life were evaluated through uniaxial tension–tension fatigue tests. Thirdly, a prediction model for the SIF was proposed by taking the residual shear and normal stresses into account. Finally, the predicted SIF was validated by the published experimental data from the literature. The predicted results of the proposed model generally agreed well with the available experimental data.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · Surface Treatment and Residual Stress · Erosion and Abrasive Machining
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical Engineering, Shandong University, Jinan 250061, China
Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE/Key National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan 250061, China
Funding
National Natural Science Foundation of China · National Key Research and Development Program of China · Natural Science Foundation of Shandong Province
References (33)
Show source-provided references
1. Machining induced surface integrity in titanium and nickel alloys: A review10.1016/j.ijmachtools.2010.11.003 ↗
2. Influence of turning parameters on the high-temperature fatigue performance of Inconel 718 superalloy10.1111/ffe.12623 ↗
3. Investigation on residual stress loss during laser peen texturing of 316L stainless steel
4. Surface modification through combination of finish turning with low plasticity burnishing and its effect on fatigue performance for Inconel 71810.1016/j.surfcoat.2019.07.057 ↗
5. State-of-the-art in surface integrity in machining of nickel-based super alloys10.1016/j.ijmachtools.2015.10.001 ↗
6. Yue, C., Gao, H., Liu, X., and Liang, S. (2018). Part functionality alterations induced by changes of surface integrity in metal milling process: A review. Appl. Sci., 8.10.3390/app8122550 ↗
7. Analysis of shot-peening and residual stress relaxation in the nickel-based superalloy RR100010.1016/j.actamat.2013.01.031 ↗
8. Residual stress and surface properties of stainless steel welded joints induced by ultrasonic pulsed water jet peening10.1016/j.measurement.2018.06.012 ↗
9. Experimental measurement and optimization of tensile residual stress in turning process of Inconel718 superalloy10.1016/j.measurement.2014.11.021 ↗
10. Characterization and analyses on micro-hardness, residual stress and microstructure in laser cladding coating of 316L stainless steel subjected to massive LSP treatment10.1016/j.jallcom.2016.02.266 ↗
11. Influence of residual stresses on the fatigue crack growth from surface anomalies in a nickel-based superalloy10.1016/j.msea.2015.07.077 ↗
12. On the conjoint influence of broaching and heat treatment on bending fatigue behavior of Inconel 71810.1016/j.msea.2016.06.030 ↗
13. Effect of ultrasonic nanocrystal surface modification on elevated temperature residual stress, microstructure, and fatigue behavior of ATI 718Plus alloy10.1016/j.ijfatigue.2018.01.017 ↗
14. Evaluating the influence of residual stresses and surface damage on fatigue life of Nickel superalloys10.1016/j.ijfatigue.2017.08.015 ↗
15. Surface machining condition and fatigue life on Inconel 71810.1016/j.prostr.2018.12.339 ↗
16. Influence of milling on the fatigue lifetime of a Ti6Al4V titanium alloy10.3390/met5031148 ↗
17. The effect of roughness and residual stresses on fatigue life time of an alloy of titanium10.1007/s00170-014-6596-7 ↗
18. Comparison of two X-ray residual stress measurement methods: Sin2 ψ and cos α, through the determination of a martensitic steel X-ray elastic constant
19. A method of X-ray microbeam measurement of local stress and its application to fatigue crack growth problems10.2472/jsms.27.251 ↗
20. A study on improvements in multiaxial stress analysis with area detector type diffraction method10.1299/kikaia.75.219 ↗
21. Very high cycle fatigue of TC4 titanium alloy under variable stress ratio: Failure mechanism and life prediction10.1016/j.ijfatigue.2017.08.004 ↗
22. Hua, Y., and Liu, Z.Q. (2018). Experimental investigation of principal residual stress and fatigue performance for turned nickel-based superalloy inconel 718. Materials, 11.10.3390/ma11060879 ↗
23. Relation between psi-splitting and microscopic residual shear stresses in x-ray stress measurement on uni-directionally deformed layers10.2472/jsms.31.227 ↗
24. Evaluation of rolling contact fatigue by X-ray diffraction ring
25. Effect of cutting parameters in the surface residual stresses generated by turning in AISI 4340 steel10.1016/j.ijmachtools.2012.05.008 ↗
26. Dry machining of Inconel 718, workpiece surface integrity10.1016/j.jmatprotec.2011.04.011 ↗
27. Numerical and experimental analysis of residual stress and plastic strain distributions in machined stainless steel10.1016/j.ijmecsci.2012.07.011 ↗
28. Surface characteristics and fatigue behavior of shot peened Inconel 71810.1016/j.ijfatigue.2018.01.005 ↗
29. Micromechanisms of fatigue crack growth in a forged Inconel 718 nickel-based superalloy10.1016/S0921-5093(99)00214-2 ↗
30. Fatigue behavior of two nickel-base alloys I: Experimental results on low cycle fatigue, fatigue crack propagation and substructures10.1016/0025-5416(82)90129-X ↗
31. Fatigue crack growth in polycrystalline IN 718 superalloy10.1016/S0921-5093(03)00156-4 ↗
32. Crack closure under high load-ratio conditions for Inconel-718 near threshold behavior10.1016/j.engfracmech.2008.09.009 ↗
33. Compression precracking methods to generate near-threshold fatigue-crack-growth-rate data10.1016/j.ijfatigue.2009.02.030 ↗