journal article·2022-04-07Open access

Digital versus Conventional Workflow in Oral Rehabilitations: Current Status

Arthur Rodriguez Gonzalez Cortes

Applied Sciences· Volume 12· Issue 8

Abstract

In recent years, computer-aided design and computer-aided manufacturing (CAD-CAM) technology has developed along with its applications in dentistry, including several new techniques that are used in oral rehabilitation applications [...]
Only a short abstract or summary was supplied by the source.
Source: crossref · Quality: short

Research context

OpenAlex topics: Dental Research and COVID-19 · Dental materials and restorations · Dental Implant Techniques and Outcomes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Dental Surgery, Faculty of Dental Surgery, University of Malta, MSD 2090 Msida, Malta

References (32)

Show source-provided references
1. Fully Digital Workflow with Magnetically Connected Guides for Full-Arch Implant Rehabilitation Following Guided Alveolar Ridge Reduction10.1111/jopr.13150 ↗
2. Full digital workflow for anterior immediate implants using custom abutments10.1563/aaid-joi-D-19-00249 ↗
3. Digital workflow for full-arch implant-supported prosthesis based on intraoral scans of a relative of the patient10.1563/aaid-joi-D-20-00095 ↗
4. Costa, A.J.D.M.E., Burgoa, S., Pinhata-Baptista, O.H., Gutierrez, V., and Cortes, A.R.G. (J. Prosthet. Dent., 2021). Digital workflow for image-guided immediate implant placement by using the socket-shield technique and custom abutment in the esthetic area, J. Prosthet. Dent., in press.
5. Three dimensionally printed surgical guides for removing fixation screws from onlay bone grafts in flapless implant surgeries10.1016/j.prosdent.2019.05.022 ↗
6. Computer-Aided Design/Computer-Aided Manufacturing Milling of Allogeneic Blocks Following Three-Dimensional Maxillofacial Graft Planning10.1097/SCS.0000000000005353 ↗
7. Digital workflow for alveolar ridge preser-vation with equine-derived bone graft and subsequent implant rehabilitation: A case report [published online ahead of print, 22 July 2020]10.1563/aaid-joi-D-20-00060 ↗
8. Full digital workflow for crown lengthening by using a single surgical guide10.1016/j.prosdent.2019.06.027 ↗
9. Mangano, F., Gandolfi, A., Luongo, G., and Logozzo, S. (2017). Intraoral scanners in dentistry: A review of the current literature. BMC Oral Health, 17.10.1186/s12903-017-0442-x ↗
10. Clinical Relevance of Digital Dentistry during COVID-19 Outbreak: A Scoped Review10.20396/bjos.v19i00.8660201 ↗
11. Combining Intraoral Scans, Cone Beam Computed Tomography and Face Scans: The Virtual Patient10.1097/SCS.0000000000004485 ↗
12. Morsy, N., El Kateb, M., Azer, A., and Fathalla, S. (J. Prosthet. Dent., 2021). Fit of zirconia fixed partial dentures fabricated from conventional impressions and digital scans: A systematic review and meta-analysis, J. Prosthet. Dent., in press.
13. Nedelcu, R., Olsson, P., Nyström, I., and Thor, A. (2018). Finish line distinctness and accuracy in 7 intraoral scanners versus conventional impression: An in vitro descriptive comparison. BMC Oral Health, 18.10.1186/s12903-018-0489-3 ↗
14. Influence of abutment tooth geometry on the accuracy of conventional and digital methods of obtaining dental impressions10.1016/j.prosdent.2016.10.021 ↗
15. Schmidt, A., Klussmann, L., Wöstmann, B., and Schlenz, M.A. (2020). Accuracy of Digital and Conventional Full-Arch Impressions in Patients: An Update. J. Clin. Med., 9.10.3390/jcm9030688 ↗
16. Evaluation of marginal fit of CAD/CAM restorations fabricated through cone beam computerized tomography and laboratory scanner data10.1016/j.prosdent.2015.08.006 ↗
17. Kim, Y.H., Jung, B.-Y., Han, S.-S., and Woo, C.-W. (2020). Accuracy evaluation of 3D printed interim prosthesis fabrication using a CBCT scanning based digital model. PLoS ONE, 15.10.1371/journal.pone.0240508 ↗
18. Can lithium disilicate ceramic crowns be fabricated on the basis of CBCT data?10.1007/s00784-019-02802-6 ↗
19. Influence of Gingival Contour on Marginal Fit of CAD-CAM Zirconia Copings on Implant Stock Abutments
20. Effect of varying levels of expertise on the reliability and reproducibility of the digital waxing of single crowns: A preliminary in vitro study
21. Marginal Adaptation of CAD/CAM All-Ceramic Crowns Made by Different Impression Methods: A Literature Review10.1111/jopr.12800 ↗
22. Vasiliu, R.-D., Porojan, S.D., and Porojan, L. (2020). In Vitro Study of Comparative Evaluation of Marginal and Internal Fit between Heat-Pressed and CAD-CAM Monolithic Glass-Ceramic Restorations after Thermal Aging. Materials, 13.10.3390/ma13194239 ↗
23. Comparison of Marginal and Internal Adaptation of Heat-Pressed and CAD/CAM Porcelain Laminate Veneers and a 2-Year Follow-up10.1111/jopr.12669 ↗
24. Comparison of marginal fit between CAD-CAM and hot-press lithium disilicate crowns10.1016/j.prosdent.2018.03.035 ↗
25. A comparison of the marginal and internal fit of porcelain laminate veneers fabricated by pressing and CAD-CAM milling and cemented with 2 different resin cements10.1016/j.prosdent.2018.04.008 ↗
26. Assessment of the internal fit and marginal integrity of interim crowns made by different manufacturing methods10.1016/j.prosdent.2019.02.024 ↗
27. Park, S.M., Park, J.M., Kim, S.K., Heo, S.J., and Koak, J.Y. (2020). Flexural Strength of 3D-Printing Resin Materials for Provisional Fixed Dental Prostheses. Materials, 13.10.3390/ma13183970 ↗
28. No-Cortes, J., Ayres, A.P., Lima, J.F., A Markarian, R., Attard, N.J., and Cortes, A.R.G. (Eur. J. Prosthodont. Restor. Dent., 2021). Trueness, 3D Deviation, Time and Cost Comparisons between Milled and 3D-Printed Resin Single Crowns, Eur. J. Prosthodont. Restor. Dent., in press.
29. In vitro assessment of the marginal and internal fits of interim implant restorations fabricated with different methods10.1016/j.prosdent.2016.03.012 ↗
30. Markarian, R., Vasconcelos, E., Kim, J., Attard, N., and Cortes, A. (Int. J. Prosthodont., 2021). Effect of Different Milling Devices on Marginal Fit of CAD-CAM Zirconia Copings on Implant Stock Abutments, Int. J. Prosthodont., in press.10.11607/ijp.7069 ↗
31. Cortes, A.R.G. (2022). Digital Dentistry: A Step-by-Step Guide and Case Atlas, Wiley Blackwell. [1st ed.].10.1002/9781119852025 ↗
32. Spagnuolo, G., and Sorrentino, R. (2020). The Role of Digital Devices in Dentistry: Clinical Trends and Scientific Evidences. J. Clin. Med., 9.10.3390/jcm9061692 ↗