journal article·2021-08-11Open access

Numerical Characterization of the Solid Particle Accumulation in a Turbulent Flow through Curved Pipes by Means of Stokes Numbers

Santiago Henríquez Lira, María Josefina Torres, Rafael Guerra Silva, Jorge Zahr Viñuela

Applied Sciences· Volume 11· Issue 16

Abstract

The accumulation of particles in a turbulent flow of incompressible air with mono-dispersed solid particles inside a 90° pipe bend was simulated using ANSYS® Fluent (CFD), taking into account the effect of gravity, drag force and a bidirectional fluid-particle coupling. An analysis of the geometrical parameters and the structures of the secondary flow generated in a curved pipe (Dean vortices) was developed, thus determining the characteristic time scales of the flow. Four Stokes numbers (Stk) were formulated, whose values are calculated and studied from the numerical simulations performed. Two different particle sizes (d1 = 50 μm y d2 = 150 μm), at two different flow conditions (Re1 = 61,500 y Re2 = 173,972), and for three curvature ratios Rc/R = 1, 4 and 8 were studied. The flow was solved using a Eulerian–Lagrangian approach with a RNG k-ε turbulence model. Once the multiphase flow was solved and validated, the distribution and maximum particle concentration inside the 90° bend were presented. Additionally, the Stk numbers were calculated to estimate the possible particle concentration level for the different system configurations (dp, Re and Rc/R). It is concluded that, if all Stk numbers are less than one, relative concentration levels reach a minimum, while for Stk numbers larger than one, an increase in the maximum concentration inside the pipe bend was noticed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Particle Dynamics in Fluid Flows · Wind and Air Flow Studies · Aerosol Filtration and Electrostatic Precipitation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical Engineering, Pontificia Universidad Católica de Valparaíso, Quilpué 2430000, Chile

References (13)

Show source-provided references
1. Aerosol Deposition in Bends with Turbulent Flow10.1021/es960975c ↗
2. Prediction of Aerosol Deposition in 90∘ Bends Using LES and an Efficient Lagrangian Tracking Method10.1016/j.jaerosci.2006.01.013 ↗
3. Experimental Study of Particle Deposition in Bends of Circular Cross Section10.1080/02786828708959166 ↗
4. Computational Guidelines and an Empirical Model for Particle Deposition in Curved Pipes Using an Eulerian-Lagrangian Approach10.1016/j.jaerosci.2012.05.007 ↗
5. Particle Transport in Turbulent Curved Pipe Flow10.1017/jfm.2016.136 ↗
6. Investigation of Rope Formation in Gas–Solid Flows through a 90° Pipe Bend Using High-Speed Video and CFD Simulations10.1177/1757482X17723306 ↗
7. Simulación Computacional de la Hidrodinámica Del, Flujo
8. Characteristics of Secondary Flow Induced by 90-Degree Elbow in Turbulent Pipe Flow
9. Equation of Motion for a Small Rigid Sphere in a Nonuniform Flow10.1063/1.864230 ↗
10. Experimental Investigation on Turbulent Flow in a Circular-Sectioned 90-Degree Bend10.1007/s003480050206 ↗
11. Kalpakli, A. (2012). Experimental Study of Turbulent Flows through Pipe Bends. [Ph.D. Thesis, KTH Royal Institute of Technology].
12. Hetsroni, G., Sideman, S., and Hartnett, J.P. (1972). Turbulent Fluid and Particle Interaction. Proceedings of the International Symposium on Two-Phase Systems, Pergamon.
13. Sommerfeld, M. (2021, March 15). Theoretical and Experimental Modelling of Particulate Flow von Karman Institute. Available online: https://store.vki.ac.be/theoretical-and-experimental-modelling-of-particulate-flow.html.