United Approach to Modelling of the Hot Deformation Behavior, Fracture, and Microstructure Evolution of Austenitic Stainless AISI 316Ti Steel
Source abstract
Abstract
Hot deformation is one of the main technological stages of products made from metallic materials. It is strictly required to decrease the costs of developing optimized technologies at this stage without a significant decrease in the products’ quality. The present investigation offers an algorithm to unite three different models to predict the hot deformation behavior, fracture, and microstructure evolution. The hot compression and tension tests of the AISI 316Ti steel were conducted using the thermomechanical simulator Gleeble 3800 for the models’ construction. The strain-compensated constitutive model and the Johnson–Mehl–Avrami–Kolmogorov (JMAK)-type model of the grain structure evolution show a satisfactory accuracy of 4.38% and 6.9%, respectively. The critical values of the modified Rice and Tracy fracture criteria were determined using the experimental values of the relative cross-section reduction and finite element calculation of the stress triaxiality. The developed models were approved for the stainless AISI 316Ti steel by the hot torsion with tension test.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Metal Forming Simulation Techniques · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Physical Metallurgy of Non-Ferrous Metals, National University of Science and Technology “MISiS”, Leninskiy Prospekt 4, 119049 Moscow, Russia
JSC “VNIINM”, Rogova str. 5a, 123098 Moscow, Russia
Funding
Russian Science Foundation
References (58)
Show source-provided references
1. Kamaya, M. (2020). Failure assessment curve for austenitic stainless steel pipes of nuclear power plants. Eng. Fract. Mech., 238.10.1016/j.engfracmech.2020.107283 ↗
2. Tan, J., Zhang, Z., Zheng, H., Wang, X., Gao, J., Wu, X., Han, E.-H., Yang, S., and Huang, P. (2020). Corrosion fatigue model of austenitic stainless steels used in pressurized water reactor nuclear power plants. J. Nucl. Mater., 541.10.1016/j.jnucmat.2020.152407 ↗
3. Characterization of the hot deformation microstructure of AISI 321 austenitic stainless steel10.1016/j.msea.2018.06.025 ↗
4. Deformation Behavior and Evolution of Microstructure and Texture During Hot Compression of AISI 304LN Stainless Steel10.1007/s11661-017-4447-5 ↗
5. Hot Deformation and Recrystallization Mechanisms in a Coarse-Grained, Niobium Stabilized Austenitic Stainless Steel (316Nb)10.1007/s11661-018-05103-x ↗
6. Xiao, Z., Huang, Y., Liu, H., and Wang, S. (2016). Hot Tensile and Fracture Behavior of 35CrMo Steel at Elevated Temperature and Strain Rate. Metals, 6.10.3390/met6090210 ↗
7. Lee, B.J., Song, J.S., and Hong, S.I. (2018). High-Temperature Deformability of a Fe-Cr-Mn-Ni Austenite Stainless Steel with High Nitrogen and High Carbon Contents. Metals, 8.10.3390/met8080608 ↗
8. Investigation on hot deformation behavior of 00Cr23Ni4N duplex stainless steel under medium–high strain rates10.1016/j.matchar.2010.11.013 ↗
9. Fu, X.-Y., Bai, P.-C., and Yang, J.-C. (2020). Hot Deformation Characteristics of 18Cr-5Ni-4Cu-N Stainless Steel Using Constitutive Equation and Processing Map. Metals, 10.10.3390/met10010082 ↗
10. Hot deformation behavior of austenitic stainless steel for a wide range of initial grain size10.1016/j.msea.2013.01.050 ↗
11. Study of the processing map and hot deformation behavior of a Cu-bearing 317LN austenitic stainless steel10.1016/j.matdes.2015.08.011 ↗
12. Hot plastic deformation of heat-resistant austenitic aisi 310s steel. Part 1. simulation of flow stress and dynamic recrystallization
13. Analysis of the cup-cone fracture in a round tensile bar10.1016/0001-6160(84)90213-X ↗
14. Parameter Identification of GTN Model Using Response Surface Methodology for High-Strength Steel BR1500HS10.1007/s11665-017-2806-4 ↗
15. A fracture criterion for fracture simulation of ductile metals based on micro-mechanisms10.1016/j.tafmec.2018.02.005 ↗
16. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures10.1016/0013-7944(85)90052-9 ↗
17. Evaluation of ductile fracture criterions
18. Calibration of ductile fracture criteria at negative stress triaxiality10.1016/j.ijmecsci.2016.02.001 ↗
19. The effect of low stress triaxialities and deformation paths on ductile fracture simulations of large shell structures10.1016/j.marstruc.2018.08.004 ↗
20. On fracture locus in the equivalent strain and stress triaxiality space10.1016/j.ijmecsci.2004.02.006 ↗
21. A new shear and tension based ductile fracture criterion: Modeling and validation10.1016/j.euromechsol.2017.08.005 ↗
22. Ductile and workability of metals
23. On the ductile enlargement of voids in triaxial stress fields∗10.1016/0022-5096(69)90033-7 ↗
24. Microstructure and hot deformation behavior of FeMnAlCMo steel10.1016/j.jmrt.2020.02.069 ↗
25. A new methodology for prediction of fracture initiation in hot compression of Ti40 titanium alloy10.1016/j.msea.2012.05.100 ↗
26. Deformation and Fracture of 13CrMoNbV Ferritic-Martensitic Steel at Elevated Temperature10.1134/S0031918X19120032 ↗
27. Hot plastic deformation of heat-resistant austenitic aisi 310s steel. Part 2. tensile torsional fracture simulation
28. Shaikh, A., Churyumov, A., Pozdniakov, A., and Churyumova, T. (2020). Simulation of the Hot Deformation and Fracture Behavior of Reduced Activation Ferritic/Martensitic 13CrMoNbV Steel. Appl. Sci., 10.10.3390/app10020530 ↗
29. Criteria for ductile fracture and their applications10.1016/0378-3804(80)90006-6 ↗
30. A Plastic-Strain, Mean-Stress Criterion for Ductile Fracture10.1115/1.3443491 ↗
31. Modeling of dynamic recrystallization behavior of 21Cr-11Ni-N-RE lean austenitic heat-resistant steel during hot deformation10.1016/j.msea.2016.03.119 ↗
32. Simulation of Microstructure Evolution in Metal Materials under Hot Plastic Deformation and Heat Treatment10.1134/S0031918X20110034 ↗
33. Reaction Kinetics in Processes of Nucleation and Growth
34. Kinetics of Phase Change. II Transformation-Time Relations for Random Distribution of Nuclei10.1063/1.1750631 ↗
35. On the Statistical Theory of Errors10.1103/RevModPhys.6.119 ↗
36. Modeling microstructural development during the forging of Waspaloy10.1007/BF02670767 ↗
37. Simulation of the Kinetics of Dynamic Recrystallization of Alloy KhN55MBYu-VD During Hot Deformation10.1007/s11041-019-00326-0 ↗
38. Modeling of recrystallization and austenite grain size for AISI 316 stainless steel and its application to hot bar rolling10.1016/S0921-5093(03)00165-5 ↗
39. Study on the dynamic recrystallization model and mechanism of nuclear grade 316LN austenitic stainless steel10.1016/j.matchar.2016.05.015 ↗
40. Investigation of Damage in Small Deformation in Hot Rolling Process Using FEM10.1016/j.matpr.2017.02.085 ↗
41. A new fracture criterion for ductile materials based on a finite element aided testing method10.1016/j.msea.2016.06.076 ↗
42. Alternative approach to model ductile fracture by incorporating anisotropic yield function10.1016/j.ijsolstr.2019.01.011 ↗
43. Mirnia, M.J., and Vahdani, M. (2020). Calibration of ductile fracture criterion from shear to equibiaxial tension using hydraulic bulge test. J. Mater. Process. Technol., 280.10.1016/j.jmatprotec.2020.116589 ↗
44. Lemesle, J., Hubert, C., and Bigerelle, M. (2020). Numerical Study of the Toughness of Complex Metal Matrix Composite Topologies. Appl. Sci., 10.10.3390/app10186250 ↗
45. Kaczmarczyk, J., and Grajcar, A. (2018). Numerical Simulation and Experimental Investigation of Cold-Rolled Steel Cutting. Materials, 11.10.3390/ma11071263 ↗
46. Finite Element simulation of the edge-trimming/cold rolling sequence: Analysis of edge cracking10.1016/j.jmatprotec.2011.12.011 ↗
47. Finite element modelling of surface defect evolution during hot rolling of Silicon steel10.1016/j.jmatprotec.2019.01.014 ↗
48. An evaluation of H13 tool steel deformation in hot forging conditions10.1016/j.jmatprotec.2017.03.026 ↗
49. Hot deformation behavior and processing workability of a Ni-based alloy10.1016/j.jallcom.2018.08.010 ↗
50. Study of the structure and mechanical properties of corrosion-resistant steel with a high concentration of boron at elevated temperatures10.1134/S0031918X14080031 ↗
51. A one-parameter approach to determining the critical conditions for the initiation of dynamic recrystallization10.1016/1359-6454(95)00146-7 ↗
52. Recent developments in stainless steels10.1016/j.mser.2009.03.001 ↗
53. The effect of cold rolling regime on microstructure and mechanical properties of AISI 304L stainless steel10.1016/j.jmatprotec.2010.02.010 ↗
54. Effect of strain rate on the strain-induced γ, → α′-martensite transformation and mechanical properties of austenitic stainless steels10.1007/s11661-005-0313-y ↗
55. Strain dependent constitutive model and microstructure evolution of a novel 9Cr martensitic steel during high-temperature deformation10.1016/j.msea.2019.04.062 ↗
56. Hot deformation behaviour and fracture of 10CrMoWNb ferritic–martensitic steel10.1016/j.matdes.2015.02.023 ↗
57. Artificial neural network modeling to evaluate and predict the deformation behavior of stainless steel type AISI 304L during hot torsion10.1016/j.asoc.2008.03.016 ↗
58. Modelling of constitutive relationship, dynamic recrystallization and grain size of 40Cr steel during hot deformation process10.1016/j.rinp.2018.12.046 ↗