Review of Machining Equipment Reliability Analysis Methods based on Condition Monitoring Technology
Source abstract
Abstract
The condition of mechanical equipment during machining is closely related to the accuracy and roughness of the workpiece. In an intelligent sensing environment, a large amount of multi-source data reflecting status information are generated during processing, and a number of studies have been conducted for machining equipment reliability analysis. In this paper, the reliability analysis method of machining equipment based on condition monitoring technology is taken as the main line. And an up-to-date comprehensive survey of multi-source information during the cutting process, failure physical analysis for signal selection and reliability assessment based on condition information will be provided. Finally, the future challenges and trends will also be presented. It is a feasible and valuable research direction to evaluate the reliability of machining equipment for product quality characteristics.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · Manufacturing Process and Optimization · Machine Fault Diagnosis Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Reliability and Systems Engineering, Beihang University, Beijing 100191, China
System Safety Dept, Beijing Branch, CASCO SIGNAL LTD, Beijing 100160, China
School of Mechanical Engineering and Automation, Beihang University, Beijing 100191, China
School of Automation Science and Electrical Engineering, Beihang University, Beijing 100191, China
Beijing Institute of Control Engineering, Beijing 100195, China
References (100+)
Show source-provided references
1. Study on the cutting force prediction of CNC turning
2. Tool life determination based on the measurement of wear and tool force ratio variation
3. Application of big data processing technology in fault diagnosis and early warning of wind turdine cearbox
4. Review of Automatic Fault Diagnosis Systems Using Audio and Vibration Signals10.1109/TSMCC.2013.2257752 ↗
5. Tool condition monitoring in an end-milling operation based on the vibration signal collected through a microcontroller-based data acquisition system10.1007/s00170-007-1186-6 ↗
6. Driver current analysis for senseless tool breakage monitoring of CNC milling machines10.1016/j.ijmachtools.2003.08.004 ↗
7. Tool wear estimation by soft-sensing technology based on stochastic fuzzy neural network
8. Guan, S. (2011). Technology of Classification and Forecast of Tools Wear Based on Muti-Feature Analysis and Fusion of AE., Jilin University.
9. Estimation of tool wear during CNC milling using neural network-based sensor fusion10.1016/j.ymssp.2005.10.010 ↗
10. Chen, P. (2011). AE-Based Fault Diagnosis of Milling Cutter, Nanchang Hangkong University.
11. Single mode Lamb waves in composite laminated plates generated by piezoelectric transducers10.1016/S0263-8223(02)00191-5 ↗
12. Acoustic emission method for tool condition monitoring based on wavelet analysis10.1007/s00170-006-0523-5 ↗
13. Micro-end-milling—III. Wear estimation and tool breakage detection using acoustic emission signals10.1016/S0890-6955(98)00017-0 ↗
14. Tool Breakage Feature Extraction and Optimization in Milling Using Acoustic Emission
15. Tool wear evaluation in drilling by acoustic emission10.1016/j.phpro.2010.01.105 ↗
16. Application of wavelet transform of acoustic emission and cutting force signals for tool condition monitoring in rough turning of Inconel 625. Proceedings of the Institution of Mechanical Engineers. part B10.1243/09544054JEM2057 ↗
17. Tool wear state recognition based on chaotic time series analysis and support vector machine
18. Research on Tool Wear Monitoring by Acoustic Emission Technology
19. Detection of tool breakage during hard turning through acoustic emission at low removal rates10.1016/j.measurement.2015.03.035 ↗
20. State recognition of tool wear based on wavelet neural network
21. Zhou, Y.M. (2014). Tool Wear Monitoring Based on Acoustic Emission Technology, Henan University of Science and Technology.
22. A new approach for detection of wear mechanisms and determination of tool life in turning using acoustic emission10.1016/j.triboint.2015.07.024 ↗
23. An approach based on current and sound signals for in-process tool wear monitoring10.1016/j.ijmachtools.2007.04.013 ↗
24. Current-Sensor-Based Feed Cutting Force Intelligent Estimation and Tool Wear Condition Monitoring10.1109/41.847910 ↗
25. A cutting power model for tool wear monitoring in milling10.1016/j.ijmachtools.2004.05.003 ↗
26. Low, K.S., Win, W.N.N., and Er, M.J. (2005, January 14–18). Wireless Sensor Networks for Industrial Environments. Proceedings of the International Conference on International Conference on Computational Intelligence for Modelling, Monterrey, Mexico.
27. Efficient security mechanisms for mHealth applications using wireless body sensor networks10.3390/s120912606 ↗
28. Monitoring architectural heritage by wireless sensors networks: San Gimignano—A case study10.3390/s140100770 ↗
29. Zhang, C., Yao, X., and Zhang, J. (2016). Tool Condition Monitoring and Remaining Useful Life Prognostic Based on a Wireless Sensor in Dry Milling Operations. Sensors, 16.10.3390/s16060795 ↗
30. Liang, S.Y., Hecker, R.L., and Landers, R.G. (2004, January 13–19). Machining Process Monitoring and Control: The State–of–the–Art. Proceedings of the ASME 2002 International Mechanical Engineering Congress and Exposition, Anaheim, CA, USA.10.1115/IMECE2002-32640 ↗
31. Control chart pattern recognition using learning vector quantization networks10.1080/00207549408956963 ↗
32. Feature-based recognition of control chart patterns10.1016/j.cie.2006.07.013 ↗
33. Improved SPC chart pattern recognition using statistical features10.1080/0020754021000049844 ↗
34. Identification of control chart patterns using wavelet filtering and robust fuzzy clustering10.1007/s10845-007-0028-6 ↗
35. Recognizing control chart patterns with neural network and numerical fitting10.1007/s10845-008-0152-y ↗
36. Control chart pattern recognition using K-MICA clustering and neural networks10.1016/j.isatra.2011.08.005 ↗
37. Recognition of control chart patterns using fuzzy SVM with a hybrid kernel function10.1007/s10845-015-1089-6 ↗
38. The in-process surface roughness measurement using fringe field capacitive (FFC) method10.1016/S0890-6955(97)00124-7 ↗
39. Identification of common sensory features for the control of CNC milling operations under varying cutting conditions10.1016/S0890-6955(03)00087-7 ↗
40. Accurate estimation of surface roughness from texture features of the surface image using an adaptive neuro-fuzzy inference system10.1016/j.precisioneng.2004.05.002 ↗
41. An in-process surface recognition system based on neural networks in end milling cutting operations10.1016/S0890-6955(98)00053-4 ↗
42. The development of an in-process surface roughness adaptive control system in turning operations10.1007/s10845-007-0024-x ↗
43. In-process surface roughness prediction using displacement signals from spindle motion10.1016/j.ijmachtools.2006.07.004 ↗
44. Prediction of workpiece surface roughness using soft computing
45. Comparison of Bayesian networks and artificial neural networks for quality detection in a machining process10.1016/j.eswa.2008.09.024 ↗
46. Predicting surface roughness in machining: A review10.1016/S0890-6955(03)00059-2 ↗
47. Study on metrological relations between instant tool displacements and surface roughness during precise ball end milling10.1016/j.measurement.2018.07.058 ↗
48. Optimisation of machining parameters during ball end milling of hardened steel with various surface inclinations10.1016/j.measurement.2017.07.020 ↗
49. Yang, P. (2016). Research on Online Condition Monitoring Based Prognostics of Key Parts and Components of Mechnicanic Equipment, University of Electronic Science and Technology of China.
50. Cutting flutter mechanism and control
51. Development of Chatter Detection in Milling Process10.1007/s00170-012-4228-7 ↗
52. In-process Detection and Suppression of Chatter in Milling10.1016/0890-6955(92)90006-3 ↗
53. Cutting force-based real-time estimation of tool wear in face milling using a combination of signal processing techniques10.1016/j.ymssp.2007.01.004 ↗
54. Complexity measure of motor current signals for tool flute breakage detection in end milling10.1016/j.ijmachtools.2007.09.008 ↗
55. An overview of approaches to end milling tool monitoring10.1016/S0890-6955(98)00020-0 ↗
56. A time–frequency acoustic emission-based monitoring technique to identify workpiece surface malfunctions in milling with multiple teeth cutting simultaneously10.1016/j.ijmachtools.2008.08.002 ↗
57. Holmberg, K., and Matthews, A. (1994). Coatings tribology-properties, techniques and applications insSurface engineering. Coatings Tribology, Elsevier. [2nd ed.].10.1016/S0167-8922(08)70748-X ↗
58. Chen, H.T. (2013). Study on Tool Wear Monitoring and Prediction Technology Based on Multi-Parameter Information Fusion, Southwest Jiaotong University.
59. Niu, Z.Y. (Computer and Information Technology, 2006). Research on Multi-sensor Information Fusion Technology in Modern Warfare, Computer and Information Technology.
60. A review about multi-sensor information fusion and its application in machining process
61. A System for Monitoring the Machining Operation by Referring to a Predicted Cutting Torque Pattern10.1016/S0007-8506(07)63436-2 ↗
62. Research on Quantitative Monitoring of Tool Wear Based on Neural Network and Multi-sensor Fusion
63. An Application Case Study on Multi-sensor Data fusion System for Intelligent Process Monitoring10.1016/j.procir.2014.01.122 ↗
64. Yan, C. (2016). Degradation Assessment and Residual Life Prediction of Rolling Bearings Based on Multiple Features, School of Mechatronics Engineering.
65. A review on machinery diagnostics and prognostics implementing condition-based maintenance10.1016/j.ymssp.2005.09.012 ↗
66. Application of the weibull proportional hazards model to aircraft and marine engine failure data10.1002/qre.4680030204 ↗
67. Liao, H., Zhao, W., and Guo, H. (2006, January 23–26). Predicting remaining useful life of an individual unit using proportional hazards model and logistic regression model. Proceedings of the 2006 Annual Reliability and Maintainability Symposium—Product Quality & Integrity (RAMS), Newport Beach, CA, USA.
68. Application of relevance vector machine and logistic regression for machine degradation assessment10.1016/j.ymssp.2009.10.011 ↗
69. Reliability Estimation for Cutting Tool Based on Logistic Regression Model10.3901/JME.2011.18.158 ↗
70. Bearing performance degradation assessment using locality preserving projections and Gaussian mixture models10.1016/j.ymssp.2011.02.006 ↗
71. A mixture Weibull proportional hazard model for mechanical system failure prediction utilising lifetime and monitoring data10.1016/j.ymssp.2013.10.013 ↗
72. Summary of KNN Algorithm
73. Li, Y.C. (2010). Research on Remote Intelligent Fault-Diagnosis of CNC Machine Tools Based on BN., Zhejiang University.10.4028/www.scientific.net/KEM.426-427.254 ↗
74. Fault Diagnosis for Rolling Bearing Based on the Variational Mode Decomposition De-Noising
75. The Fault Diagnostic Method of Numerical Controlled Machine Based on Sugeno Fuzzy Model
76. Jia, G.F. (2011). Rolling Bearing Faults Diagnosis Based on Hilbert-Huang Transform and Decision Tree, Huazhong Agricultural University.
77. Guifeng, J., Shengfa, Y., Chengwen, T., and Jie, X. (2011, January 15–17). Fault diagnosis of roller bearing using feedback EMD and decision tree. Proceedings of the International Conference on Electric Information & Control Engineering, Wuhan, China.
78. Application of Wavelet Package Analysis and Support Vector Machine to Fault Diagnosis of Cutting Too
79. Hu, L. (2010). Research on Novelty Detection Methods Oriented to Flight Vehicle Health Management, National University of Defense Technology.
80. Chang, Q. (2011). Research on the Key Technologies of Knowledge Based Structural Health Management, Nanjing University of Aeronautics and Astronautics.
81. Long, X.Y. (2014). System Design of Intelligent NC Machine Tool Fault Diagnosis Syetem, Southwest Jiaotong University.
82. Review of vibration signal processing methods
83. Time domain rapid diagnosis of signal power spectrum characteristics
84. Ding, Y.M., Kuo, Y.H., and Gao, X.B. (2002). Digital Signal Processing-Time Domain Discrete Random Signal Processing, Xi’an University of Electronic Science and Technology Press.
85. Performance of STFT in speech processing used for cochlear implant
86. Hu, C.H., Li, H.H., and Liu, T. (2004). System Analysis and Design Based on Matlab6.x—Wavelet Analysis, Xi’an University of Electronic Science and Technology Press.
87. Discrete wavelet transform for tool breakage monitoring10.1016/S0890-6955(99)00021-8 ↗
88. The Empirical Mode Decomposition and the Hilbert Spectrum for Nonlinear and Non-Stationary Time Series Analysis10.1098/rspa.1998.0193 ↗
89. Rail defect diagnosis using wavelet packet decomposition10.1109/TIA.2003.816474 ↗
90. Ensemble Empirical Mode Decomposition and Sparsity Measurement as Tools Enhancing the Gear Diagnostic Capabilities of Time Synchronous Averaging10.1142/S2424922X17500048 ↗
91. Dong, S., Wang, J., Tang, B., Xu, X., and Liu, J. (2016, January 19–22). Bearing faults recognition based on the local mode decomposition morphological spectrum and optimized support vector machine. Proceedings of the 2016 13th International Conference on Ubiquitous Robots and Ambient Intelligence (URAI), Xian, China.10.1109/URAI.2016.7734128 ↗
92. Gritli, Y., Rossi, C., Zarri, L., Filippetti, F., Chatti, A., Casadei, D., and Stefani, A. (2011, January 15–18). Advanced diagnosis of broken bar fault in induction machines by using discrete wavelet transform under time-varying condition. Proceedings of the 2011 IEEE International Electric Machines & Drives Conference (IEMDC), Niagara Falls, ON, Canada.10.1109/IEMDC.2011.5994632 ↗
93. Zhao, Z.H. (2012). Research on Mechanical Fault Feature Extraction and Diagnosis Based on Vibration Signal, Beijing Jiaotong University.
94. Ren, S. (2014). Research on Fault Diagnosis Technology of Rolling Bearing Based on Vibration Signal, Nanchang Aeronautical University.
95. Qiao, H. (2011). Fault Diagnosis of Key Parts of CNC Machine Tools Based on Wavelet Neural Network, Southwest Jiaotong University.
96. High-performance XY table fault diagnosis based on wavelet multi-resolution analysis
97. Fault Diagnosis of CNC Machine Tool Based on Acoustic Emission and Neural Network
98. Zhang, P. (2009). Research on Aeroengine Fault Diagnosis Technology Based on Kalman Filter, Nanjing Aerospace University.
99. Younus, A.M., and Yang, B.-S. (2010, January 12–14). Wavelet co-efficient of thermal image analysis for machine fault diagnosis. Proceedings of the Prognosties & System Health Management Conference, Macao, China.10.1109/PHM.2010.5414573 ↗
100. Atoui, I., Meradi, H., Boulkroune, R., Saidi, R., and Grid, A. (2013, January 12–15). Fault detection and diagnosis in rotating machinery by vibration monitoring using FFT and Wavelet techniques. Proceedings of the 8th International Workshop on Systems, Signal Processing and their Applications (WoSSPA), Algiers, Algeria.10.1109/WoSSPA.2013.6602399 ↗