Eco-Efficient Hybrid Cements: Pozzolanic, Mechanical and Abrasion Properties
Source abstract
Abstract
One of the most polluting industries is the cement industry and, for this reason, alternative lines of research recommend the use of substitute materials for traditional Portland cement. This study proposes the use of industrial (slag and fly ash) and ceramic wastes for the total or partial replacement of Portland cement in the manufacturing of both alkaline-activated and hybrid cements. To carry out this study and evaluate the behavior of the proposed materials, different mortars were manufactured: Portland cement (CEM I), two alkaline-activated slag systems and six hybrid systems, with an 80–20% waste-to-Portland-cement ratio for all the proposed wastes. An assessment of the pozzolanic activity was carried out for the different materials. The behavior of all the systems regarding mechanical resistance and durability to abrasion was studied. All the proposed materials, especially those with ceramic wastes, showed pozzolanic activity and suitable characteristics for use in the manufacturing of alternative cements. The mortar made of slag activated with waterglass presented the highest mechanical strength and lowest porosity, but the hybrid materials presented competitive results. After being subjected to the Böhme abrasion test, their effectiveness as substitutes for Portland cement is reiterated, some of them improving their durability to wear.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Recycled Aggregate Concrete Performance · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Materials Sciences and Engineering Department-IAAB, University Carlos III of Madrid, Avda. Universidad 30, Leganés, 28911 Madrid, Spain
Funding
Ministerio de Ciencia, Innovación y Universidades · Comunidad de Madrid
References (33)
Show source-provided references
1. Andrew, R.M. (2017). Global CO2 emissions from cement production. Earth Syst. Sci. Data, 1–52.
2. Building Sustainability on Deep Values Through Mindfulness Nurturing10.1016/j.ecolecon.2017.12.003 ↗
3. The effectiveness of different superplasticizers in ambient cured one-part alkali activated pastes10.1016/j.cemconcomp.2018.12.027 ↗
4. Transition to circular economy in the construction industry: Environmental aspects of waste brick recycling scenarios10.1016/j.wasman.2020.09.004 ↗
5. Advanced life cycle integrated exergoeconomic analysis of building heating systems: An application and proposing new indices10.1016/j.jclepro.2018.05.239 ↗
6. La activación alcalina de diferentes aluminosilicatos como una alternativa al Cemento Portland: Cementos activados alcalinamente o geopolímeros10.4067/S0718-50732017000200001 ↗
7. Waste glass in the geopolymer preparation. Mechanical and microstructural characterisation10.1016/j.jclepro.2014.11.074 ↗
8. Use of glass waste as an activator in the preparation of alkali-activated slag. Mechanical strength and paste characterisation10.1016/j.cemconres.2013.12.005 ↗
9. In situ characterization of main reaction products in alkali-activated slag materials by Confocal Raman Microscopy10.1016/j.cemconcomp.2019.02.004 ↗
10. High volume Portland cement replacement: A review10.1016/j.conbuildmat.2020.120445 ↗
11. Pitarch, A.M., Reig, L., Tomás, A.E., Forcada, G., Soriano, L., Borrachero, M.V., Payá, J., and Monzó, J.M. (2021). Pozzolanic activity of tiles, bricks and ceramic sanitary-ware in eco-friendly Portland blended cements. J. Clean. Prod., 279.10.1016/j.jclepro.2020.123713 ↗
12. Waste ceramic as low cost and eco-friendly materials in the production of sustainable mortars10.1016/j.jclepro.2020.121825 ↗
13. Enríquez, E., Torres-Carrasco, M., Cabrera, M.J., Muñoz, D., and Fernández, J.F. (2020). Towards more sustainable building based on modified Portland cements through partial substitution by engineered feldspars. Constr. Build. Mater., 121334.10.1016/j.conbuildmat.2020.121334 ↗
14. Torres-Carrasco, M., Enríquez, E., Terrón-menoyo, L., Cabrera, M.J., Muñoz, D., and Fernández, J.F. (2020). Improvement of thermal efficiency in cement mortars by using synthetic feldspars. Constr. Build. Mater., 121279.10.1016/j.conbuildmat.2020.121279 ↗
15. Desempeño a temperaturas altas de morteros y hormigones basados en mezclas de escoria/metacaolín activadas alcalinamente10.3989/mc.2012.01712 ↗
16. Freeze–thaw cycle test and damage mechanics models of alkali-activated slag concrete10.1016/j.conbuildmat.2010.12.006 ↗
17. Freeze-thaw durability of activated blast furnace slag cement concrete
18. Durability of Alkali-Activated Slag Concretes Prepared using waste glass as Alternative activator
19. New cements for the 21st century: The pursuit of an alternative to Portland cement10.1016/j.cemconres.2011.03.016 ↗
20. Shagñay, S., Velasco, F., del Campo, A., and Torres-Carrasco, M. (2020). Wear behavior in pastes of alkali-activated materials: Influence of precursor and alkali solution. Tribol. Int., 147.10.1016/j.triboint.2020.106293 ↗
21. Compressive strength and durability properties of roller-compacted concrete pavement containing electric arc furnace slag aggregate and fly ash10.1016/j.conbuildmat.2018.10.080 ↗
22. Asociación Española de Normalización y Certificación, EN 196-5 (2011). Method of Testing Cement. Part 5: Pozzolanicity Test for Pozzolanic Cement, AENOR.
23. Characterization of Ceramic-Based Construction and Demolition Waste: Use as Pozzolan in Cements10.1111/jace.14437 ↗
24. UNE-EN 196-5 (2011). Métodos de Ensayo de Cementos. Ensayo de Puzolanicidad Para Los Cementos Puzolánicos, AENOR.
25. En, N.E., and Une-en, N. (2016). Española, AENOR.
26. New insights in weathering analysis of anhydrous cements by using high spectral and spatial resolution Confocal Raman Microscopy10.1016/j.cemconres.2017.06.003 ↗
27. In situ full view of the Portland cement hydration by confocal Raman microscopy10.1002/jrs.5574 ↗
28. Waste glass as a precursor in alkaline activation: Chemical process and hydration products10.1016/j.conbuildmat.2017.02.071 ↗
29. Puertas, F., Torres-Carrasco, M., and Alonso, M.M. (2014). Reuse of urban and industrial waste glass as novel activator for alkali-activated slag cement pastes: A case study. Handbook of Alkali-Activated Cements, Mortars and Concretes, Woodhead.10.1533/9781782422884.1.75 ↗
30. Resistance of alkali-activated slag mortar to abrasion and fire10.1680/adcr.2011.23.6.289 ↗
31. Abrasion Resistance of Cement Mortar with Different Pozzolanic Compositions and Matrices10.1061/(ASCE)MT.1943-5533.0000147 ↗
32. Effects of bottom ash and granulated blast furnace slag as fine aggregate on abrasion resistance of concrete10.1515/secm-2015-0101 ↗
33. A Taguchi approach for investigating the engineering properties of concretes incorporating barite, colemanite, basaltic pumice and ground blast furnace slag10.1016/j.conbuildmat.2016.12.209 ↗