Research on a Nonlinear Dynamic Incipient Fault Detection Method for Rolling Bearings
Source abstract
Abstract
The incipient fault detection technology of rolling bearings is the key to ensure its normal operation and is of great significance for most industrial processes. However, the vibration signals of rolling bearings are a set of time series with non-linear and timing correlation, and weak incipient fault characteristics of rolling bearings bring about obstructions for the fault detection. This paper proposes a nonlinear dynamic incipient fault detection method for rolling bearings to solve these problems. The kernel function and the moving window algorithm are used to establish a non-linear dynamic model, and the real-time characteristics of the system are obtained. At the same time, the deep decomposition method is used to extract weak fault characteristics under the strong noise, and the incipient failures of rolling bearings are detected. Finally, the validity and feasibility of the scheme are verified by two simulation experiments. Experimental results show that the fault detection rate based on the proposed method is higher than 85% for incipient fault of rolling bearings, and the detection delay is almost zero. Compared with the detection performance of traditional methods, the proposed nonlinear dynamic incipient fault detection method is of better accuracy and applicability.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Machine Fault Diagnosis Techniques · Fault Detection and Control Systems · Gear and Bearing Dynamics Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical Engineering, Shenyang Jianzhu University, Shenyang 110168, Liaoning, China
The State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110819, Liaoning, China
Funding
National Science Foundation of China · Natural Science Foundation of Liaoning Province
References (36)
Show source-provided references
1. Islam, R., Kim, Y.-H., Kim, J., and Kim, J.-M. (2019). Detecting and Learning Unknown Fault States by Automatically Finding the Optimal Number of Clusters for Online Bearing Fault Diagnosis. Appl. Sci., 9.10.3390/app9112326 ↗
2. Early fault diagnosis of rolling bearings based on hierarchical symbol dynamic entropy and binary tree support vector machine10.1016/j.jsv.2018.04.036 ↗
3. Rolling Bearing Fault Detection of Civil Aircraft Engine Based on Adaptive Estimation of Instantaneous Angular Speed10.1109/TII.2019.2949000 ↗
4. Research on bearing fault feature extraction based on singular value decomposition and optimized frequency band entropy10.1016/j.ymssp.2018.08.056 ↗
5. A New Online Detection Approach for Rolling Bearing Incipient Fault via Self-Adaptive Deep Feature Matching10.1109/TIM.2019.2903699 ↗
6. Time-varying tan-type barrier Lyapunov function-based adaptive fuzzy control for switched systems with unknown dead zone10.1109/ACCESS.2019.2934117 ↗
7. Chen, Y., Zhang, T., Luo, Z., and Sun, K. (2019). A novel rolling bearing fault diagnosis and severity analysis method. Appl. Sci., 9.10.3390/app9112356 ↗
8. Development and trend of condition monitoring and fault diagnosis of multi-sensors information fusion for rolling bearings: A review10.1007/s00170-017-1474-8 ↗
9. Influence of uneven loading condition on the sound radiation of starved lubricated full ceramic ball bearings10.1016/j.jsv.2019.114910 ↗
10. Modeling of amplitude-dependent damping characteristics of fiber reinforced composite thin plate10.1016/j.apm.2019.11.048 ↗
11. Model-based uneven loading condition monitoring of full ceramic ball bearings in starved lubrication10.1016/j.ymssp.2019.106583 ↗
12. Ekman boundary layer mass transfer mechanism of free sink vortex10.1016/j.ijheatmasstransfer.2019.119250 ↗
13. Skóra, M., Ewert, P., and Kowalski, C.T. (2019). Selected Rolling Bearing Fault Diagnostic Methods in Wheel Embedded Permanent Magnet Brushless Direct Current Motors. Energies, 12.10.3390/en12214212 ↗
14. ReLTanh: An activation function with vanishing gradient resistance for SAE-based DNNs and its application to rotating machinery fault diagnosis10.1016/j.neucom.2019.07.017 ↗
15. Rolling Bearing Initial Fault Detection Using Long Short-Term Memory Recurrent Network10.1109/ACCESS.2019.2954091 ↗
16. Degradation State Recognition of Rolling Bearing Based on K-Means and CNN Algorithm
17. A Generic Intelligent Bearing Fault Diagnosis System Using Compact Adaptive 1D CNN Classifier10.1007/s11265-018-1378-3 ↗
18. Incipient fault detection of rolling bearing using maximum autocorrelation impulse harmonic to noise deconvolution and parameter optimized fast EEMD10.1016/j.isatra.2018.12.020 ↗
19. Kurtogram manifold learning and its application to rolling bearing weak signal detection10.1016/j.measurement.2018.06.026 ↗
20. Cui, L., Wang, X., Wang, H., and Ma, J. (2019). Research on Remaining Useful Life Prediction of Rolling Element Bearings Based on Time-Varying Kalman Filter. IEEE Trans. Instrum. Meas.10.1109/TIM.2019.2924509 ↗
21. Dynamic Bayesian wavelet transform: New methodology for extraction of repetitive transients10.1016/j.ymssp.2016.11.003 ↗
22. Underdetermined blind separation of bearing faults in hyperplane space with variational mode decomposition10.1016/j.ymssp.2018.10.016 ↗
23. Health Condition Monitoring and Early Fault Diagnosis of Bearings Using SDF and Intrinsic Characteristic-Scale Decomposition10.1109/TIM.2016.2564078 ↗
24. A novel optimized multi-kernel relevance vector machine with selected sensitive features and its application in early fault diagnosis for rolling bearings10.1016/j.measurement.2020.107583 ↗
25. A Combined Polynomial Chirplet Transform and Synchroextracting Technique for Analyzing Nonstationary Signals of Rotating Machinery10.1109/TIM.2019.2913058 ↗
26. Deep PCA Based Real-Time Incipient Fault Detection and Diagnosis Methodology for Electrical Drive in High-Speed Trains10.1109/TVT.2018.2818538 ↗
27. Liu, L., Liu, Y., Li, D., Tong, S., and Wang, Z. (2019). Barrier Lyapunov Function-Based Adaptive Fuzzy FTC for Switched Systems and Its Applications to Resistance-Inductance-Capacitance Circuit System. IEEE Trans. Cybern., 1–12.10.1109/TCYB.2019.2904186 ↗
28. Application of weighted contribution rate of nonlinear output frequency response functions to rotor rub-impact10.1016/j.ymssp.2019.106518 ↗
29. Adaptive neural control for switched non-linear systems with multiple tracking error constraints10.1049/iet-spr.2018.5077 ↗
30. Enhanced empirical wavelet transform based time-frequency analysis and its application to rolling bearing fault diagnosis
31. Nonlinear Component Analysis as a Kernel Eigenvalue Problem10.1162/089976698300017467 ↗
32. CNN and KPCA-Based Automated Feature Extraction for Real Time Driving Pattern Recognition10.1109/ACCESS.2019.2938768 ↗
33. Time-varying Barrier Lyapunov Function Based Adaptive Neural Controller Design for Nonlinear Pure-feedback Systems with Unknown Hysteresis10.1007/s12555-018-0745-y ↗
34. A Fault Diagnosis and Reconfiguration Strategy for Self-Validating Hydrogen Sensor Array Based on MWPCA and ELM10.1109/ACCESS.2019.2936128 ↗
35. Further understanding of rolling contact fatigue in rolling element bearings—A review10.1016/j.triboint.2019.105849 ↗
36. Yu, K., Ma, H., Zeng, J., Han, H., Li, H., and Wen, B. (2019). Frobenius and nuclear hybrid norm penalized robust principal component analysis for transient impulsive feature detection of rolling bearings. ISA Trans.10.1016/j.isatra.2019.11.021 ↗