Cracking and Toughening Mechanisms in Nanoscale Metallic Multilayer Films: A Brief Review
Source abstract
Abstract
Nanoscale metallic multilayer films (NMMFs) have captured scientific interests on their mechanical responses. Compared with the properties of monolithic films, multilayers possess unique high strength as the individual layer thickness reduces to the nanoscale, which is benefited from the plentiful hetero-interfaces. However, NMMFs always exhibit a low fracture toughness and ductility, which seriously hinders their practical applications. While there have been reviews on the strengthening and deformation mechanisms of microlaminate, rapid developments in nanotechnology have brought an urgent requirement for an overview focused on the cracking and toughening mechanisms in nanoscale metallic multilayers. This article provides an extensive review on the structure, standard methodology and fracture mechanisms of NMMFs. A number of issues about the crack-related properties of NMMFs have been displayed, such as fracture toughness, wear resistance, adhesion energy, and plastic instability. Taken together, it is hoped that this review will achieve the following two purposes: (1) introducing the size-dependent cracking and toughness performance in NMMFs; and (2) offer a better understanding of the role interfaces displayed in toughening mechanisms. Finally, we list a few questions we concerned, which may shed light on further development.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Microstructure and mechanical properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory of Solidification Processing, Center of Advanced Lubrication and Seal Materials, Northwestern Polytechnical University, Xi’an 710072, Shaanxi, China
Funding
National Natural Science Foundation of China · Initiative Postdocs Supporting Program
References (100+)
Show source-provided references
1. Structure and mechanical properties of Cu-X (X = Nb, Cr, Ni) nanolayered composites10.1016/S1359-6462(98)00196-1 ↗
2. Recent advances in modeling of interfaces and mechanical behavior of multilayer metallic/ceramic composites10.1007/s10853-017-1704-3 ↗
3. Preface to the viewpoint set on: Deformation and stability of nanoscale metallic multilayers10.1016/j.scriptamat.2003.11.036 ↗
4. Nanotwins and stacking faults in high-strength epitaxial Ag/Al multilayer films10.1063/1.4768000 ↗
5. Deformability of ultrahigh strength 5 nm Cu/Nb nanolayered composites10.1063/1.2938921 ↗
6. Mara, N.A., Bhattacharyya, D., Dickerson, P.O., Hoagland, R.G., and Misra, A. (2009). Ultrahigh strength and ductility of Cu-Nb nanolayered composites. Materials Science Forum, Trans Tech Publications.10.4028/www.scientific.net/MSF.633-634.647 ↗
7. Work hardening in rolled nanolayered metallic composites10.1016/j.actamat.2004.09.018 ↗
8. Length-scale-dependent deformation and fracture behavior of Cu/X (X = Nb, Zr) multilayers: The constraining effects of the ductile phase on the brittle phase10.1016/j.actamat.2011.08.016 ↗
9. The mechanical behavior of nanoscale metallic multilayers: A survey10.1007/s10409-015-0401-1 ↗
10. On the role of weak interface in crack blunting process in nanoscale layered composites10.1016/j.apsusc.2017.10.002 ↗
11. Strength and plasticity of nanolaminated materials10.1080/21663831.2016.1225321 ↗
12. A maximum in ductility and fracture toughness in nanostructured Cu/Cr multilayer films10.1016/j.scriptamat.2009.10.030 ↗
13. Mechanism for shear banding in nanolayered composites10.1063/1.3458000 ↗
14. Achieving maximum hardness in semi-coherent multilayer thin films with unequal layer thickness10.1016/j.actamat.2012.01.029 ↗
15. Improving the crack resistance and fracture toughness of Cu/Ru multilayer thin films via tailoring the individual layer thickness10.1016/j.jallcom.2018.01.282 ↗
16. Deformation behavior of Au/Ti multilayers under indentation10.1007/s10854-011-0550-3 ↗
17. Microstructure and mechanical properties of nanoscale Cu/Ni multilayers10.1016/j.msea.2009.09.058 ↗
18. Atomic structure variations of mechanically stable fcc-bcc interfaces10.1063/1.3693015 ↗
19. In situ tem observations of room temperature dislocation climb at interfaces in nanolayered Al/Nb composites10.1016/j.scriptamat.2010.04.005 ↗
20. Stacking fault and partial dislocation dominated strengthening mechanisms in highly textured Cu/Co multilayers10.1016/j.ijplas.2013.03.005 ↗
21. High strength Mg/Nb nanolayer composites10.1016/j.msea.2010.10.101 ↗
22. Phase stability in Al/Ti multilayers10.1016/S1359-6454(99)00003-8 ↗
23. Stacking sequences in close-packed metallic superlattices10.1103/PhysRevB.34.1378 ↗
24. Structural transitions in epitaxial overlayers10.1051/jphys:0198600470120205500 ↗
25. Polymorphic phase stability in thin multilayers10.1016/S1359-6462(98)00144-4 ↗
26. Bi-phase transition diagrams of metallic thin multilayers10.1016/j.actamat.2004.11.004 ↗
27. Mechanical properties of fcc/fcc Cu/Nb nanostructured multilayers10.1016/j.msea.2012.03.009 ↗
28. Structure transformation and coherent interface in large lattice-mismatched nanoscale multilayers
29. Observation of continuous and reversible bcc–fcc phase transformation in Ag/V multilayers10.1063/1.3569759 ↗
30. Microstructure and strengthening mechanisms in Cu/Fe multilayers10.1016/j.actamat.2012.08.005 ↗
31. Phase transition and dislocation nucleation in Cu-Nb layered composites during physical vapor deposition10.1557/jmr.2008.0120 ↗
32. The microstructure and mechanical behavior of Mg/Ti multilayers as a function of individual layer thickness10.1016/j.actamat.2013.10.032 ↗
33. Freund, L.B., and Suresh, S. (2003). Thin Film Materials: Stress, Defect Formation, and Surface Evolution, Cambridge University Press.10.1017/CBO9780511754715 ↗
34. Defects in epitaxial multilayers
35. Erratum deformation mechanism maps for polycrystalline metallic multilayers10.1016/S1359-6462(99)00239-0 ↗
36. Emergence of strain-rate sensitivity in Cu nanopillars: Transition from dislocation multiplication to dislocation nucleation10.1016/j.actamat.2011.05.038 ↗
37. The influence of grain morphology on indentation deformation characteristic of metallic nano-multilayers10.1016/j.msea.2009.08.006 ↗
38. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation10.1557/JMR.1992.1564 ↗
39. Microstructure and nanoindentation investigation of magnetron sputtering Ag/Co multilayers10.1016/j.surfcoat.2006.01.044 ↗
40. Strain rate sensitivity and related plastic deformation mechanism transition in nanoscale Ag/W multilayers10.1016/j.tsf.2014.03.061 ↗
41. Indentation creep behavior of nano-scale Ag/Co multilayers10.1016/j.scriptamat.2006.03.036 ↗
42. Microstructure and ultrahigh strength of nanoscale Cu/Nb multilayers10.1016/j.tsf.2010.12.251 ↗
43. Room temperature nanoindentation creep of nanoscale Ag/Fe multilayers10.1016/j.matlet.2009.10.003 ↗
44. Measurement of mechanical properties by ultra-low load indentation10.1016/S0921-5093(98)00724-2 ↗
45. A method for interpreting the data form depth-sensing indentation instruments10.1557/JMR.1986.0601 ↗
46. Dominant factor controlling the fracture mode in nanostructured Cu/Cr multilayer films10.1016/j.msea.2010.12.054 ↗
47. Scaling of the ductility with yield strength in nanostructured Cu/Cr multilayer films10.1016/j.scriptamat.2010.03.024 ↗
48. Modulating individual thickness for optimized combination of strength and ductility in Cu/Ru multilayer films10.1016/j.matlet.2013.06.053 ↗
49. Thickness dependent critical strain in submicron Cu films adherent to polymer substrate10.1063/1.2722684 ↗
50. The yield strength of thin copper films on kapton10.1063/1.1644634 ↗
51. Elasto-plastic properties of gold thin films deposited onto polymeric substrates10.1007/s10853-009-3339-5 ↗
52. Buckling behaviors and adhesion energy of nanostructured Cu/X (X = Nb, Zr) multilayer films on a compliant substrate10.1016/j.actamat.2013.09.028 ↗
53. Cracking of thin bonded films in residual tension10.1016/0020-7683(92)90015-L ↗
54. Discussion: “Edge-bonded dissimilar orthogonal elastic wedges under normal and shear loading”
55. Deformation and fracture in microlaminates10.1016/S0040-6090(96)08905-5 ↗
56. Contact deformation regimes around sharp indentations and the concept of the characteristic strain10.1557/JMR.2002.0144 ↗
57. Strain rate sensitivity and activation volume of Cu/Ni metallic multilayer thin films measured via micropillar compression10.1063/1.4739521 ↗
58. Sample dimensions influence strength and crystal plasticity10.1126/science.1098993 ↗
59. A methodology to investigate size scale effects in crystalline plasticity using uniaxial compression testing10.1016/j.msea.2005.03.082 ↗
60. Strain rate sensitivity of nanolayered Cu/X (X = Cr, Zr) micropillars: Effects of heterophase interface/twin boundary10.1016/j.msea.2014.06.025 ↗
61. Intrinsic and extrinsic size effects on deformation in nanolayered Cu/Zr micropillars: From bulk-like to small-volume materials behavior10.1016/j.actamat.2012.03.056 ↗
62. Approaching the theoretical strength in nanoporous Au10.1063/1.2240109 ↗
63. Corrigendum to “size dependence in mechanical properties of gold at the micron scale in the absence of strain gradients”
64. Size-affected single-slip behavior of pure nickel microcrystals10.1016/j.actamat.2005.05.023 ↗
65. Study of strain softening behavior of Al–AlSc multilayers using microcompression testing10.1016/j.actamat.2009.06.007 ↗
66. Micropillar compression of Al/SiC nanolaminates10.1016/j.actamat.2010.08.025 ↗
67. On plasticity and fracture of nanostructured Cu/X (X = Au, Cr) multilayers: The effects of length scale and interface/boundary10.1016/j.actamat.2010.03.042 ↗
68. A new method of determining strength and fracture toughness of thin hard coatings10.1016/S0040-6090(00)01312-2 ↗
69. Friction monitored scratch adhesion testing
70. Micro/nanomechanical and tribological characterization of ultrathin amorphous carbon coatings10.1557/JMR.1999.0309 ↗
71. Development of a continuous microscratch technique in an atomic force microscope and its application to study scratch resistance of ultrathin hard amorphous carbon coatings10.1557/JMR.2001.0066 ↗
72. Characterization of Ti–Zr–N films deposited by cathodic vacuum arc with different substrate bias10.1016/j.apsusc.2007.12.022 ↗
73. Hydrophobicity-dependent friction and wear of spin-on zeolite thin films10.1016/j.scriptamat.2007.09.005 ↗
74. Nanotribology studies of Cr, Cr2N and CrN thin films using constant and ramped load nanoscratch techniques10.1016/S0257-8972(01)01403-7 ↗
75. A new experimental method for studying the cracking behaviour of PVD multilayer coatings10.1016/S0257-8972(03)00618-2 ↗
76. Nanoindentation and nanoscratch behaviors of Ag/Ni multilayers10.1016/j.apsusc.2008.12.001 ↗
77. The structure and properties of alternately electrodeposited metals
78. Length-scale-dependent deformation mechanisms in incoherent metallic multilayered composites10.1016/j.actamat.2005.06.025 ↗
79. Structure of composition-modulated Cu/Ni thin films prepared by electrodeposition10.1557/JMR.1989.0755 ↗
80. Mechanical properties of highly textured Cu/Ni multilayers10.1016/j.actamat.2010.11.057 ↗
81. Single-dislocation-based strengthening mechanisms in nanoscale metallic multilayers10.1080/01418610208239626 ↗
82. Tensile properties of nanostructured Ni-Cu multilayered materials prepared by electrodeposition10.1149/1.2085495 ↗
83. Nanoindentation study of the mechanical properties of copper-nickel multilayered thin films10.1063/1.103070 ↗
84. Atomistic simulations of dislocation–interface interactions in the Cu-Ni multilayer system10.1080/01418610008212148 ↗
85. On the strengthening effects of interfaces in multilayer fcc metallic composites
86. Wang, F., Zhang, L.F., Huang, P., Xie, J.Y., Lu, T.J., and Xu, K.W. (2013). Microstructure and Flow Stress of Nanoscale Cu/Nb Multilayers. J. Nanomater., 55.10.1155/2013/912548 ↗
87. Tensile behavior of 40 nm Cu/Nb nanoscale multilayers10.1016/j.scriptamat.2008.01.005 ↗
88. Investigation of deformation instability of Au/Cu multilayers by indentation10.1080/14786431003776802 ↗
89. Mechanical properties of sputtered Cu/V and Al/Nb multilayer films10.1016/j.msea.2007.07.101 ↗
90. Evaluating modulus and hardness enhancement in evaporated Cu/W multilayers10.1016/j.actamat.2006.07.043 ↗
91. Strain rate sensitivity of unequal grained nano-multilayers10.1016/j.msea.2011.04.009 ↗
92. Mechanical properties of crystalline Cu/Zr and crystal–amorphous Cu/Cu–Zr multilayers10.1016/j.msea.2012.05.056 ↗
93. Nanoindentation investigation of the mechanical behaviors of nanoscale Ag/Cu multilayers10.1557/JMR.2007.0423 ↗
94. Hardness enhancement and elastic modulus behaviour in sputtered Ag/Ni multilayers with different modulation wavelengths10.1080/01418619908210311 ↗
95. Observation of largely enhanced hardness in nanomultilayers of the Ag–Nb system with positive enthalpy of formation10.1063/1.2735670 ↗
96. Suppression of irradiation hardening in nanoscale V/Ag multilayers10.1016/j.actamat.2011.06.043 ↗
97. Microstructure and nanoindentation hardness of Ag/Fe multilayers10.1016/S1003-6326(09)60105-9 ↗
98. Influence of plasticity mismatch and porosity on mechanical behavior of nanoscale Ag/W multilayers10.1016/j.msea.2006.12.012 ↗
99. Length scale-dependent deformation behavior of nanolayered Cu/Zr micropillars10.1016/j.actamat.2011.12.001 ↗
100. Microcompression study of Al-Nb nanoscale multilayers10.1557/jmr.2011.414 ↗