journal article·2025-12-05Open access

Lifetime Prediction of Lithium-Ion Batteries Based on the Correlation Between Internal Resistance Growth and State of Health (SoH)

Hongjong Lee, Byunghyun Lee, Junhee Lee, Junho Choi, Kwonse Kim

Applied Sciences· Volume 15· Issue 24

Abstract

This study analyzes the lifetime characteristics and degradation behavior of lithium-ion batteries under increasing charge–discharge cycles. The experiment focused on RE (Real Part), IM (Imaginary Part), and DCIR Degradation% (Direct Current Internal Resistance Degradation). The RE increased from 0.0023 Ω at the initial state to 0.00293 Ω after 1200 cycles, representing a 28% rise, with a sharp acceleration after 400 cycles due to interfacial resistance buildup and electrolyte decomposition. The IM shifted from negative to positive values, indicating delayed electrochemical reactions and enhanced inductive behavior. A pronounced transition occurred between 400 and 800 cycles, confirming this range as a critical phase of performance degradation. Correlation analysis between SoH (State of Health) and DCIR Degradation% showed that while SoH decreased slightly from 100% to 87.3%, DCIR Degradation% increased significantly to 137.8%, indicating that internal resistance growth is the dominant cause of aging. When SoH falls below 70%, the battery reaches its effective end-of-life, accompanied by severe heat generation and power loss. In conclusion, the combined analysis of RE, IM, and DCIR Degradation% demonstrates that accumulated internal resistance is the key factor determining battery lifetime. Stabilizing the SEI layer, reinforcing electrode structures, and improving electrolyte stability are essential strategies for extending battery durability.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Electric Powertrain R&D Division, Korea Automotive Technology Institute, Pungse-ro, Pungse-myeon, Cheonan-si 31214, Republic of Korea

R & D Division, LAONTECH, Mojeon 1-gil, Seonggeo-eup, Cheonan-si 31041, Republic of Korea

Automotive Engineering Department, Ajou Motor College, Daehak-gil, Jupo-myeon, Boryeong-si 33415, Republic of Korea

Funding

Korea Institute for Advancement of Technology

References (33)

Show source-provided references
1. Lithium-Sulfur Battery Discharge Optimization Using a Thermally-Coupled Equivalent Circuit Model10.1016/j.ifacol.2021.11.206 ↗
2. Preparation of Graphene by Exfoliation and Its Application in Lithium-Ion Batteries10.1016/j.jallcom.2023.170885 ↗
3. Habib, A.K.M.A., Hasan, M.K., Issa, G.F., Singh, D., Islam, S., and Ghazal, T.M. (2023). Lithium-Ion Battery Management System for Electric Vehicles: Constraints, Challenges, and Recommendations. Batteries, 9.10.3390/batteries9030152 ↗
4. de la Vega, J., Riba, J.R., and Ortega-Redondo, J.A. (2025). On the Use of Machine Learning Methods for EV Battery Pack Data Forecast Applied to Reconstructed Dynamic Profiles. Appl. Sci., 15.10.20944/preprints202510.0106.v1 ↗
5. Aydin, N., Gurses, D., and Beyazoglu, E. (2025). Efficient Immersion Cooling of Lithium-Ion Batteries: A CFD and MOGA-Based Optimization Study. Appl. Sci., 15.10.3390/app152111564 ↗
6. Research Progress on Recycling of Spent Lithium Iron Phosphate Batteries10.1016/j.psep.2025.107512 ↗
7. Itinerary-Dependent Degradation Analysis of a Lithium-Ion Battery Cell for E-Bike Applications in Rwanda10.32604/ee.2024.053100 ↗
8. Research and Implementation of a Fast-Charging Methodology for Lithium-Ion Batteries under Bottom and Dual Cooling Configurations10.1016/j.est.2025.117285 ↗
9. Study on Lithium-Ion Battery State of Health Estimation through Multiobjective Feature Selection and Multivariate Analysis10.1016/j.egyr.2025.02.043 ↗
10. An Overview and Comparison of Online Implementable SOC Estimation Methods for Lithium-Ion Battery10.1109/TIA.2017.2775179 ↗
11. Ria, A., Manfredini, G., Gagliardi, F., Vitelli, M., Bruschi, P., and Piotto, M. (2023). Online High-Resolution EIS of Lithium-Ion Batteries by Means of Compact and Low Power ASIC. Batteries, 9.10.3390/batteries9050239 ↗
12. Life Cycle Sustainability Assessment Strategy for NMC Lithium-Ion Battery10.1016/j.procir.2024.12.076 ↗
13. The Evolution of Thermal Runaway Parameters of Lithium-Ion Batteries under Different Abuse Conditions: A Review10.1016/j.est.2024.112624 ↗
14. Electrochemical Modeling in Lithium Batteries: Pathways to next-Generation Power Sources10.1016/j.jpowsour.2025.237833 ↗
15. Enhancing Battery Lifetime in PV Battery Home Storage System Using Forecast Based Operating Strategies10.1016/j.egypro.2016.10.100 ↗
16. Modeling the Volumetric Expansion of the Lithium-Sulfur Battery Considering Charge and Discharge Profiles10.1016/j.ensm.2022.11.053 ↗
17. Potential of a Machine Learning Based Cross-Process Control in Lithium-Ion Battery Production10.1016/j.procir.2022.09.093 ↗
18. Antony Jose, S., Gallant, A., Gomez, P.L., Jaggers, Z., Johansson, E., LaPierre, Z., and Menezes, P.L. (2025). Solid-State Lithium Batteries: Advances, Challenges, and Future Perspectives. Batteries, 11.10.3390/batteries11030090 ↗
19. Zhang, T., and Sun, H. (2025). A Method for Predicting the Remaining Life of Lithium-Ion Batteries Based on an Improved Dempster–Shafer Evidence Theory Framework. Energies, 18.10.3390/en18133370 ↗
20. Zhang, W., Pranav, R.S.B., Wang, R., Lee, C., Zeng, J., Cho, M., and Shim, J. (2024). Lithium-Ion Battery Life Prediction Using Deep Transfer Learning. Batteries, 10.10.3390/batteries10120434 ↗
21. Madani, S.S., Shabeer, Y., Allard, F., Fowler, M., Ziebert, C., Wang, Z., Panchal, S., Chaoui, H., Mekhilef, S., and Dou, S.X. (2025). A Comprehensive Review on Lithium-Ion Battery Lifetime Prediction and Aging Mechanism Analysis. Batteries, 11.10.3390/batteries11040127 ↗
22. Muresanu, A.D., and Dudescu, M.C. (2025). FEM Study on Enhancing Crashworthiness of Cylindrical Li-Ion Battery Packs Using Spacers Between the Cells. Appl. Sci., 15.10.3390/app15052720 ↗
23. Guo, J., Wang, Y., Liu, H., Liu, Y., and Yang, X. (2025). Thermal–Electrical Optimization of Lithium-Ion Battery Conductor Structures Under Extreme High Amperage Current. Appl. Sci., 15.10.3390/app15105338 ↗
24. Liu, C., and Pei, L. (2025). Accurate Multi-Step State of Charge Prediction for Electric Vehicle Batteries Using the Wavelet-Guided Temporal Feature Enhanced Informer. Appl. Sci., 15.10.3390/app152111431 ↗
25. Arachchige, B., Perinpanayagam, S., and Jaras, R. (2017). Enhanced Prognostic Model for Lithium Ion Batteries Based on Particle Filter State Transition Model Modification. Appl. Sci., 7.10.3390/app7111172 ↗
26. Harting, N., Schenkendorf, R., Wolff, N., and Krewer, U. (2018). State-of-Health Identification of Lithium-Ion Batteries Based on Nonlinear Frequency Response Analysis: First Steps with Machine Learning. Appl. Sci., 8.10.3390/app8050821 ↗
27. Galatsopoulos, C., Papadopoulou, S., Ziogou, C., Trigkas, D., and Voutetakis, S. (2020). Optimal Operation of a Residential Battery Energy Storage System in a Time-of-Use Pricing Environment. Appl. Sci., 10.10.3390/app10175997 ↗
28. Accardo, A., Dotelli, G., Musa, M.L., and Spessa, E. (2021). Life Cycle Assessment of an NMC Battery for Application to Electric Light-Duty Commercial Vehicles and Comparison with a Sodium-Nickel-Chloride Battery. Appl. Sci., 11.10.3390/app11031160 ↗
29. Yin, T., Jia, L., Li, X., Zheng, L., and Dai, Z. (2022). Effect of High-Rate Cycle Aging and Over-Discharge on NCM811 (LiNi0.8Co0.1Mn0.1O2) Batteries. Energies, 15.10.3390/en15082862 ↗
30. Julien, C.M., and Mauger, A. (2020). NCA, NCM811, and the Route to Ni-Richer Lithium-Ion Batteries. Energies, 13.10.3390/en13236363 ↗
31. (2011). Electrically propelled road vehicles—Test specification for lithium-ion traction battery packs and systems—Part 1: High-power applications (Standard No. ISO 12405-1).
32. (2018). Electrically propelled road vehicles—Test specification for lithium-ion traction battery packs and systems—Part 4: Performance testing (Standard No. ISO 12405-4).
33. (2015). Lithium-ion traction battery packs and systems for electric vehicles—Part 1: High power application test procedures (Standard No. GB/T 31467.1-2015).