Development of a Laboratory-Integrated Microwave-Assisted Cutting Machine and Its Use in Carbonate Rocks
Source abstract
Abstract
Full-face tunnel boring machines (TBMs) can be used to excavate hard rocks, but there are still significant issues with low advance rate and high cutter wear. However, roadheaders and other mechanical excavators are unable to cut hard rocks. Research on microwave-assisted excavation has gained attention recently in an effort to decrease cutter wear, increase the TBM advance rate in hard rock excavation, and enable the mechanical excavation of hard rocks using machines other than TBMs. Nevertheless, neither a laboratory nor a field-based integrated microwave-assisted excavation machine is currently in use. The present paper aims to examine the cuttability of carbonate rock samples in the laboratory using an integrated microwave-assisted linear cutting machine which has just been developed. Samples of carbonate rock were gathered from Türkiye and Romania, and both untreated and treated samples underwent cutting tests with a pointed pick. For both non-microwave and microwave-assisted cutting experiments, optimum specific energy values for each sample were determined. During microwaving at 15 kW, when comparing optimum specific energy values to those of non-microwave cutting, notable decreases were seen. The evaluation of the findings demonstrated the economic viability of cutting carbonate rocks with microwave assistance.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Tunneling and Rock Mechanics · Advanced machining processes and optimization · Mineral Processing and Grinding
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Graduate School of Science and Engineering, Hacettepe University, Ankara 06532, Türkiye
Mining Engineering Department, Hacettepe University, Ankara 06532, Türkiye
Department of Mining Engineering, Nigde Omer Halisdemir University, Nigde 51240, Türkiye
Geological Engineering Department, Ankara University, Ankara 06100, Türkiye
Department of Mechanical, Industrial and Transport Engineering, University of Petrosani, 332006 Petroșani, Romania
Funding
European Union through the ERA-NET Cofund on Raw Materials
References (34)
Show source-provided references
1. Complex analysis of rock cutting with consideration of rock tool interaction using distinct element method (DEM)
2. Effect of hardfacing on wear reduction of pick cutters under mixed rock conditions
3. Performance prediction of hard rock Tunnel Boring Machines (TBMs) in difficult ground10.1016/j.tust.2016.01.009 ↗
4. Santamarina, C. (1989, January 25–29). Rock excavation with microwaves: A literature review. Proceedings of the 1989 ASCE Foundation Engineering, Evanston, IL, USA. Available online: https://cedb.asce.org/CEDBsearch/record.jsp?dockey=0060982.
5. Microwave heating of dry and water saturated basalt, granite and sandstone10.1504/IJMME.2010.031810 ↗
6. Satish, H. (2005). Exploring Microwave Assisted Rock Breakage for Possible Space Mining Applications. [Master’s Thesis, McGill University]. Available online: https://escholarship.mcgill.ca/concern/theses/pz50gw73f.
7. Investigating microwave assisted rock breakage for possible space mining applications10.1179/174328606X101902 ↗
8. Motlagh, P.N. (2009). An Investigation on the Influence of Microwave Energy on Basic Mechanical Properties of Hard Rocks. [Master’s Thesis, Concordia University]. Available online: https://spectrum.library.concordia.ca/976521/.
9. Nejati, H., Hassani, F., and Radziszewski, P. (2012, January 15–18). Experimental Investigating of Fracture Toughness Reduction and Fracture Development in Basalt Specimens under Microwave Illumination. Proceedings of the 13th ASCE Aerospace Division Conference on Engineering, Science, Construction, and Operations in Challenging Environments, Pasadena, CA, USA.10.1061/9780784412190.036 ↗
10. Motlagh, P.N. (2015). Physical and Mechanical Properties of Rocks Exposed to Microwave Irradiation: Potential Application to Tunnel Boring. [Ph.D. Thesis, McGill University]. Available online: https://escholarship.mcgill.ca/concern/theses/xg94hs56k.
11. The influence of microwave irradiation on rocks for microwave assisted underground excavation10.1016/j.jrmge.2015.10.004 ↗
12. The influence of microwave irradiation on thermal properties of main rock-forming minerals10.1016/j.applthermaleng.2016.11.015 ↗
13. Effect of microwave treatment on thermal and ultrasonic properties of gabbro10.1016/j.applthermaleng.2017.08.060 ↗
14. Experimental Investigation on the Effects of Microwave Treatment on Basalt Heating, Mechanical Strength, and Fragmentation10.1007/s00603-019-1743-y ↗
15. Experimental investigation on structural evolution of granite at high temperature induced by microwave irradiation10.1007/s00710-019-00681-z ↗
16. Influence of individual and combined pre-treatment on the strength properties of granite and sandstone10.1007/s12517-019-5009-5 ↗
17. Influence of microwave treatment on mechanical behaviour of compact basalts under different confining pressures10.1016/j.jrmge.2019.06.009 ↗
18. The influence of microwave treatment on the compressive and tensile strength of igneous rocks10.1016/j.ijrmms.2020.104303 ↗
19. Wang, P., Lin, Y., Chen, D., and Yin, T. (2025). Dynamic Mode I Fracture Toughness and Damage Mechanism of Dry and Saturated Sandstone Subject to Microwave Radiation. Appl. Sci., 15.10.3390/app15179500 ↗
20. Thermo-mechanical degradation and fracture evolution in low-permeability coal subjected to cyclic heating–cryogenic cooling10.1063/5.0282266 ↗
21. Lindroth, D.P., Morrell, R.J., and Blair, J.R. (1991). Microwave Assisted Hard Rock Cutting. (No. 5,003,144), United States Patent, Available online: https://patents.google.com/patent/US5003144A/en.
22. Hassani, F., and Nekoovaght, P. (July, January 29). The development of microwave assisted machineries to break hard rocks. Proceedings of the 28th International Symposium on Automation and Robotics in Construction, Seoul, Republic of Korea.
23. Experimental Study on Microwave Assisted Hard Rock Cutting of Granite10.1007/s00501-016-0569-0 ↗
24. Experimental study on artificially induced crack patterns and their consequences on mechanical excavation processes10.1016/j.ijrmms.2017.10.024 ↗
25. Evaluation of cutting forces in granite treated with microwaves on the basis of multiple linear regression analysis10.1016/j.ijrmms.2018.04.043 ↗
26. Feng, X.T., Lu, G.M., Li, Y.H., and Zhang, X.W. (2019). Cutter Head for Microwave Presplitting Type Hard-Rock Tunnel Boring Machine. (No. 10,428,654 B2), United States Patent, Available online: https://patents.google.com/patent/US10428654B2/en.
27. The effect of mineralogy on the microwave assisted cutting of igneous rocks10.1007/s10064-021-02561-3 ↗
28. A Test System for Microwave-Assisted Dual-Mode Mechanical Cutting of Hard Rock Under True Triaxial Compression10.1007/s00603-024-03815-8 ↗
29. Field test of high-power microwave-assisted mechanical excavation for deep hard iron ore10.1016/j.jrmge.2023.09.012 ↗
30. Experimental study on rock breaking using a microwave-assisted tunnel boring machine cutter10.1007/s10064-024-03632-x ↗
31. Kahraman, S., Fener, M., Comakli, R., Buldak, S., and Andras, A. (2024). Investigating the Microwave Assisted Cutting of Carbonate Rocks, ERA Learn. Research Project; the European Union Through the ERA-NET Cofund on Raw Materials (ERA-MIN 2) (Reference Number: ERA-MIN-2018_95).
32. Ulusay, R., and Hudson, J.A. (2007). The Complete ISRM Suggested Methods for Rock Characterization, Testing and Monitoring: 1974–2006. Suggested Methods Prepared by the Commission on Testing Methods, International Society for Rock Mechanics, ISRM Turkish National Group.
33. Damage of basalt induced by microwave irradiation10.1016/j.mineng.2012.01.011 ↗
34. The dielectric constant of mineral powders