Microstructure evolution and mechanical properties of Ti-46.5Al-4Nb-1Cr-0.2Ta alloy during near-isothermal forging at α single-phase region
Source abstract
Abstract
For TiAl alloys, forging in the α single-phase region is an important and efficient method to obtain fine lamellar structure. In this study, Ti-46.5Al-4Nb-1.8Cr-0.2Ta (at.%) alloy was fabricated using direct single-pass forging near α transition temperature (α-DSPF), the microstructure evolution and mechanical properties were investigated. The results show that the refined near lamellar structures were obtained by means of recrystallization of α phase through near-isothermal forging at 1390 °C. Finally, the yield strength, ultimate tensile strength and elongation of the as-forged alloy at 1390 °C were simultaneously improved due to the improvement of lamellar fraction, refinement of grain size and reduction of the β o phase. This work provides a promising and cost-effective method for α-processing of TiAl alloys to improve the mechanical properties.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Nat. Mater. · 2016 · 15 · 80310.1038/nmat4706 ↗
2. Recent advances in alloy development for metal additive manufacturing in gas turbine/aerospace applications: a review10.1007/s41745-022-00290-4 ↗
3. High temperature materials for aerospace applications: Ni-based superalloys and γ-TiAl alloys10.1016/j.crhy.2018.10.002 ↗
4. Modeling concepts for intermetallic titanium aluminides10.1016/j.pmatsci.2016.01.001 ↗
5. Development of gamma titanium aluminide (γ-TiAl) alloys: a review10.1016/j.jallcom.2022.167262 ↗
6. A review of microstructure control and mechanical performance optimization of γ-TiAl alloys10.1016/j.jallcom.2022.167611 ↗
7. Design, processing, microstructure, properties, and applications of advanced intermetallic TiAl alloys10.1002/adem.201200231 ↗
8. Advances in gammalloy materials–processes–application technology: successes, dilemmas, and future
9. Machinability of γ-TiAl: a review10.1016/j.cja.2023.05.029 ↗
10. The effect of vanadium on the microstructure and mechanical properties of TiAl alloy fabricated by twin-wire directed energy deposition-arc10.1007/978-3-031-04721-3 ↗
11. Enhanced strength and ductility in Ti46Al4Nb1Mo alloys via boron addition10.1016/j.jmst.2021.06.037 ↗
12. Tailoring microstructure and mechanical properties of β-solidifying TiAl alloy fabricated by laser-engineered net shaping through heat treatment
13. Evading the strength-ductility trade-off at room temperature and achieving ultrahigh plasticity at 800°C in a TiAl alloy10.1016/j.actamat.2021.117585 ↗
14. Formation of core-shell-like structure in β-solidified TiAl alloy and its effect on hot workability10.1016/j.actamat.2023.119036 ↗
15. History and development of γ-TiAl alloys and the effect of alloying elements on their phase transformations10.1016/j.jallcom.2022.164811 ↗
16. Design of novel β-solidifying TiAl alloys with adjustable β/B2-phase fraction and excellent hot-workability10.1002/adem.200800164 ↗
17. Intermetallic β-solidifying γ-TiAl based alloys − from fundamental research to application10.1002/adem.201600735 ↗
18. Enhancement of room-temperature mechanical properties of TiAl alloy by trace addition of C10.1016/j.msea.2023.145598 ↗
19. Simultaneous enhancement of strength and ductility in high Nb-TiAl by Si alloying10.1016/j.jmst.2023.09.008 ↗
20. A refined fully lamellar TiAl alloy extruded at α-phase region: microstructure and mechanical properties10.1016/j.msea.2023.145804 ↗
21. Microstructure evolution and mechanical properties of a Ti-45Al-8.5Nb-(W, B, Y) alloy obtained by controlled cooling from a single β region10.1016/j.jallcom.2017.12.326 ↗
22. Microstructure refinement of cast TiAl alloys by β solidification10.1016/j.scriptamat.2004.03.044 ↗
23. Grain refinement in γ-TiAl-based alloys by solid state phase transformations10.1016/j.intermet.2005.11.015 ↗
24. Effect of multi-stage heat treatment on mechanical properties and microstructure transformation of Ti–48Al–2Cr–2Nb alloy10.1016/j.msea.2021.141321 ↗
25. Effect of inter-pass annealing on the deformation microstructure of Ti-48Al-2Cr-2Nb alloy10.1016/j.jallcom.2022.167751 ↗
26. Simultaneously enhancing strength and ductility of high-Nb-containing TiAl alloy via extrusion-assisted microstructure tailoring10.1016/j.matchar.2023.113390 ↗
27. The microstructure evolution and tensile properties of Ti–43Al–4Nb–1Mo-0.2B alloy during hot rolling10.1016/j.msea.2022.144347 ↗
28. Effect of forging routes on the microstructure and mechanical properties of newly-developed Ti-44Al-5.5Nb-0.5W-0.5Cr-0.3Si-0.1C alloys10.1016/j.jallcom.2024.174442 ↗
29. Microstructural evolution, hot workability, and mechanical properties of Ti–43Al–2Cr–2Mn–0.2Y alloy10.1016/j.matdes.2015.10.076 ↗
30. Texture evolution during α-forging of γ-TiAl alloys10.1016/S0921-5093(97)00659-X ↗
31. Grain fragmentation associated continuous dynamic recrystallization (CDRX) of hexagonal structure during uniaxial isothermal compression: high-temperature α phase in TiAl alloys10.1016/j.intermet.2020.107028 ↗
32. Microstructure and tensile properties of containerless near-isothermally forged TiAl alloys10.1016/S1003-6326(11)61098-4 ↗
33. An in-situ high-energy X-ray diffraction study on the hot-deformation behavior of a β-phase containing TiAl alloy10.1016/j.intermet.2013.02.016 ↗
34. Crystallography and phase transformation mechanisms in TiAl-based alloys – a synthesis10.1016/j.intermet.2009.05.013 ↗
35. New insights into high-temperature deformation and phase transformation mechanisms of lamellar structures in high Nb-containing TiAl alloys10.1016/j.actamat.2020.01.021 ↗
36. Decomposition and phase transformation mechanisms of α2 lamellae in β-solidified γ-TiAl alloys
37. Microstructure evolution and mechanical properties of β/γ-TiAl alloy during high-rate near-isothermal multidirectional forging10.1016/j.msea.2024.146648 ↗
38. High strength in high Nb containing TiAl alloy sheet with fine duplex microstructure produced by hot pack rolling10.1016/j.jallcom.2016.12.005 ↗
39. Microstructure evolution and recrystallization of Ti-44.5Al-3.8Nb-1Mo-0.2B alloy with different initial microstructure during hot pack rolling10.1016/j.matdes.2022.111138 ↗
40. Dynamic recrystallization and hot processing map of Ti-48Al-2Cr-2Nb alloy during the hot deformation10.1016/j.matchar.2021.111332 ↗
41. Investigation on the microstructure evolution and dynamic recrystallization mechanisms of TiAl alloy at elevated temperature10.1016/j.jmrt.2021.06.107 ↗
42. Characterization of the elevated temperature compressive deformation behavior of high Nb containing TiAl alloys with two microstructures10.1016/j.msea.2018.04.055 ↗
43. The effects of hot-pack coating materials on the pack rolling process and microstructural characteristics during Ti-46Al-8Nb sheet fabrication10.3390/ma13030762 ↗
44. Rapid decomposition of lamellar microstructure and enhanced hot workability of an as-cast triphase Ti–45Al–6Nb–1Mo alloy via one-step alpha-extrusion & annealing10.1016/j.msea.2020.140438 ↗
45. Reassessment of the binary aluminum-titanium phase diagram10.1361/154770306X109809 ↗
46. Hot deformation behavior of β phase containing γ-TiAl alloy10.1016/j.msea.2016.03.005 ↗
47. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
48. Y. Yu, H. Kou, X. Xu, Z. Zhang, Y. Wang, M. Jia, Y. Li, F. Qiang, J. Li, Quasi-in-situ investigation on complete lamellar fragmentation of β-solidified TiAl alloy during uniaxial isothermal compression, Journal of Materials Research and Technology. https://doi.org/10.1016/j.jmst.2023.11.024.10.1016/j.jmst.2023.11.024 ↗
49. Deformation behavior and dynamic recrystallization mechanism of a novel high Nb containing TiAl alloy in (α+γ) dual-phase field10.1016/j.jallcom.2023.169250 ↗
50. α″ martensite engineering: a strategy to achieve high yield strength and low yield ratio synergy for dual-phase titanium alloy10.1016/j.matdes.2024.112764 ↗
51. Fine duplex Ti-48Al alloy with high strength produced by forging based on near-γ microstructure10.1016/j.jallcom.2023.169058 ↗
52. Improving the formability and mechanical properties of TiAl alloy by direct forging of uncondensed powder10.1016/j.msea.2023.145890 ↗
53. The improved properties and microstructure of β-solidify TiAl alloys by boron addition and multi steps forging process10.1038/s41598-019-47530-9 ↗
54. Microstructural stability, phase evolution and mechanical properties of a forged W-modified high-Mn β-γ-TiAl alloy10.1016/j.intermet.2021.107230 ↗
55. Effect of texture on mechanical anisotropy of Ti–47Al–2Cr-0.2Mo intermetallics10.1016/j.intermet.2022.107742 ↗
56. Microstructure evolution and mechanical properties of a high Nb–TiAl alloy via HIP and heat treatment10.1016/j.msea.2023.145517 ↗
57. Remarkable improvement in tensile strength of a polycrystalline γ-TiAl-based intermetallic alloy by deformation nanotwins10.1016/j.msea.2021.141692 ↗
58. Lattice and phase strain evolution during tensile loading of an intermetallic, multi-phase γ-TiAl based alloy10.1016/j.actamat.2018.07.062 ↗
59. Microstructure evolution and properties of powder metallurgy Ti43Al9V0.3Y alloy sheets at different rolling temperatures10.1016/j.msea.2023.144685 ↗