Study on the Detection of Sleeve Grouting Defects Using the Impact-Echo Method: FEM and Experimental Analysis
Source abstract
Abstract
Grouted sleeve connections are widely employed in the substructures of prefabricated bridges. After installation, the grout filling condition inside the sleeves cannot be directly inspected, while grouting defects may significantly compromise the mechanical performance of the piers. This study investigates the feasibility of using the non-destructive impact-echo method to detect grouting defects in sleeves. Finite element simulation was conducted to analyze the influence of the distance between the impact point and the signal acquisition point on detection accuracy, revealing that a distance of 40–60 mm yields optimal results. Experimental findings demonstrate that the method can effectively identify grouting defects in double-row sleeves, although it cannot precisely locate the defective sleeve. A novel analytical approach is proposed, using the thickness frequency and its modes of fully grouted specimens as a benchmark. By comparing thickness frequencies at different measurement points, grout quality can be intuitively evaluated. Validation using a six-sleeve model with varying grouting densities confirmed the method’s effectiveness in detecting grouting defects in non-boundary sleeves and its practical applicability in engineering.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Structural Health Monitoring Techniques · Ultrasonics and Acoustic Wave Propagation · Geophysical Methods and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Power China Northwest Engineering Corporation Limited, Xi’an 710100, China
Key Laboratory of Transport Industry of Bridge Detection Reinforcement Technology, Chang’an University, Xi’an 710064, China
Funding
Key R&D Program Projects in Shaanxi Province · Shaanxi Provincial Department of Transportation and Communications Transportation Research Project · Shanxi Province Transportation Science and Technology Project · Power China Northwest Engineering Corporation Limited Science and Technology Project
References (40)
Show source-provided references
1. Seismic performance of a two-span steel girder bridge with ABC connections10.1016/j.engstruct.2021.112502 ↗
2. Review of accelerated construction of bridge piers—Methods and performance10.1186/s43251-024-00116-6 ↗
3. Seismic Analysis of Precast Concrete Bridge Columns Connected with Grouted Splice Sleeve Connectors10.1061/(ASCE)ST.1943-541X.0001678 ↗
4. Experimental and Numerical Assessment of Precast Bridge Columns with Different Grouted Splice Sleeve Coupler Designs Based on Shake Table Test10.1061/(ASCE)BE.1943-5592.0001748 ↗
5. Experimental study of precast columns with a hybrid joint incorporating bolted couplers and grouted sleeves10.1016/j.jobe.2023.106878 ↗
6. Evaluation of common defects of grouted sleeve connectors
7. Experimental study on construction quality of grouting sleeve detected by X-ray digital radiography technology
8. Analysis and research on non-destructive testing technology of grouting quality based on X-ray absorption contrast imaging improvement
9. Experimental study of testing defects in grout sleeve pieces by X-ray
10. Study on non-destructive testing method of grouting sleeve compactness with wavelet packet energy ratio change10.1016/j.conbuildmat.2023.131767 ↗
11. Ultrasonic guided wave detection of weak bond interface defects in steel-concrete structures
12. On-line Monitoring Technologies for Complex Structural Damage Identification Based on Low-frequency Structural Dynamic Signals and Ultrasonic Guided Waves
13. Study on low frequency ultrasonic array imaging method for defects of concrete structures
14. Research on identification of grouting defect size based on impact—Echo method
15. Experimental and signal processing research on concrete-rock structural defects by impact-echo method
16. Study on quantitative detection of defects of concrete members by impact-echo method
17. Effect of impact source on detection quality in impact echo testing of sleeve grouting10.3139/120.111566 ↗
18. Mechanical performance of prefabricated concrete beam-column joints with double-grouted sleeve connectors: A numerical and theoretical study10.1016/j.istruc.2023.07.060 ↗
19. Experimental research on the mechanical behavior of grouted sleeves with fiber-reinforced grouting material under cyclic loading10.1016/j.istruc.2021.08.083 ↗
20. Seismic performance of pre-fabricated segmental bridge piers with grouted splice sleeve connections10.1016/j.engstruct.2020.111668 ↗
21. The seismic performance of precast bridge piers with grouted sleeves
22. Detect defections in concrete plates with impulse-response test and statistical pattern recognition10.1016/j.ymssp.2021.107948 ↗
23. Investigation of Ground-Penetrating Radar, Impact-echo, and Infrared Thermography Methods to Detect Defects in Concrete Bridge Decks10.1177/03611981221101027 ↗
24. Experimental study on the impact-echo test for the flaw detection of concrete structure
25. Explaining impact-echo geometry effects using modal analysis theory and numerical simulations10.1016/j.ndteint.2023.103035 ↗
26. Automated Procedure to Identify Concrete Defects from Impact-echo Data
27. Detection of concrete structures using the Impact-echo method
28. Experimental and numerical study on detection of sleeve grouting defect with impact-echo method10.1016/j.istruc.2023.03.137 ↗
29. Lin, W., Wang, H., Chen, S., Lin, X., Huang, J., and Wang, R. (2023). Time Reversal Method for Lamb−Wave−Based Diagnostics of Multiple−Sleeve Grouting Connections. Buildings, 13.10.3390/buildings13112824 ↗
30. Detecting flaws in concrete blocks using the impact-echo method10.1016/j.ndteint.2007.08.008 ↗
31. Assessment of identifiable defect size in a drilled shaft using sonic echo method: Numerical simulation10.1016/j.compgeo.2010.06.002 ↗
32. Prediction of the strength of concrete radiation shielding based on LS-SVM10.1016/j.anucene.2015.05.030 ↗
33. Zhang, J.-K., Yan, W., and Cui, D.-M. (2016). Concrete Condition Assessment Using Impact-echo Method and Extreme Learning Machines. Sensors, 16.10.3390/s16040447 ↗
34. Experiment on grout sleeve compactness detection using the Impact-echo method
35. Liu, Z.H. (2017). The Testing Technology of Sleeves Grouting Defect Based on the Impact-Echo Method. [Master’s Thesis, Anhui Jianzhu University].
36. Current status and progress of concrete nondestructive testing technology
37. Experimental study on testing grouting quality of grouted and splicing joints in precast concrete structure using impact-echo method
38. Ministry of Housing and Urban-Rural Development of the People’s Republic of China (2010). Code for Design of Concrete Structures (Standard No. GB 50010-2010).
39. Ministry of Housing and Urban-Rural Development of the People’s Republic of China (2017). Standard for Design of Steel Structures (Standard No. GB 50017-2017).
40. Ministry of Housing and Urban-Rural Development of the People’s Republic of China (2015). Technical Code for Application of Cementitious Grout (Standard No. GB/T 50448-2015).