Hot deformation behaviour and microstructure evolution of TiAl-based alloy reinforced with carbide particles
Source abstract
Abstract
Abstract The hot deformation behaviour and microstructure evolution of TiAl-based alloy with nominal composition Ti-43Al-8Nb-3.6C-0.7Mo (at.%) reinforced with carbide particles were studied. The compression tests were carried out in the temperature range from 900 to 1000 °C and strain rates from 0.0001 to 0.01 s−1 up to a true strain of 0.5. The microstructure of the compression specimens was characterised using scanning electron microscopy (SEM), transmission electron microscopy (TEM), and electron backscatter diffraction (EBSD). The work hardening stage of the flow curves results from an increment of the dislocation density and deformation twins. The work softening of the composite results from the dynamic recovery (DRV), dynamic recrystallization (DRX) and fragmentation of some coarse Ti2AlC particles. The size of recrystallised grains increases with decreasing Zener-Hollomon parameter. The non-uniform distribution of local strains in the deformed specimens and deformation temperature affect the orientation and fragmentation of coarse Ti2AlC particles. A constitutive model predicting hot deformation behaviour of the studied alloy is proposed and its validity is evaluated and discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Advances in gamma titanium aluminides and their manufacturing techniques10.1016/j.paerosci.2012.04.001 ↗
2. Elevated temperature deformation behavior of discontinuous-reinforced titanium aluminide matrix composites10.1016/S0921-5093(02)00553-1 ↗
3. Strain partitioning behavior of in situ Ti5Si3/TiAl composites10.1016/j.jallcom.2018.02.087 ↗
4. In situ Ti2AlN reinforced TiAl-based composite with a novel network structure: microstructure and flexural property at elevated temperatures10.1016/j.msea.2018.11.018 ↗
5. Formation of TiC/Ti2AlC and α2+γ in in-situ TiAl composites with different solidification paths10.1016/j.intermet.2017.02.025 ↗
6. The role of incoherent interface in evading strength-ductility trade-off dilemma of Ti2AlN/TiAl composite: a combined in-situ TEM and atomistic simulations10.1016/j.compositesb.2020.107794 ↗
7. Effects of C and N additions on primary MAX phase particles in intermetallic Ti-Al-Nb-Mo matrix in-situ composites prepared by vacuum induction melting
8. Vacuum induction melting and casting of TiAl-based matrix in-situ composites reinforced by carbide particles using graphite crucibles and moulds10.1016/j.vacuum.2019.108930 ↗
9. Effects of niobium on phase composition and improving mechanical properties in TiAl alloy reinforced by Ti2AlC10.1016/j.intermet.2019.106630 ↗
10. Effect of Ta element on microstructure formation and mechanical properties of high-Nb TiAl alloys10.1016/j.intermet.2018.10.017 ↗
11. Room temperature mechanical behaviour of cast in-situ TiAl matrix composite reinforced with carbide particles10.1016/j.intermet.2018.11.007 ↗
12. Fracture behaviour of cast in-situ TiAl matrix composite reinforced with carbide particles10.1016/j.msea.2018.02.077 ↗
13. Thermodynamic description of the Al-C-Ti system10.1016/j.jallcom.2014.10.119 ↗
14. Microstructure and mechanical properties of cast in-situ TiAl matrix composites reinforced with (Ti,Nb)2AlC particles10.1016/j.matdes.2017.08.012 ↗
15. High temperature deformation behaviour and microstructure of cast in-situ TiAl matrix composite reinforced with carbide particles10.1016/j.jallcom.2019.05.136 ↗
16. Influence of alloy composition and thermal history on carbide precipitation in γ-based TiAl alloys10.1016/j.intermet.2017.05.006 ↗
17. Nucleation and thermal stability of carbide precipitates in high Nb containing TiAl alloys10.1016/j.intermet.2015.07.001 ↗
18. Morphology evolution of Ti3AlC carbide precipitates in high Nb containing TiAl alloys10.1016/j.actamat.2017.07.018 ↗
19. A critical review of the oxidation of Ti2AlC, Ti3AlC2 and Cr2AlC in air10.1080/21663831.2013.806364 ↗
20. Processing and characterization of Ti2AlC, Ti2AlN, and Ti2AlC0.5N0.510.1007/s11661-006-0243-3 ↗
21. Lamellar structure and effect of Ti2AlC on properties of prepared in-situ TiAl matrix composites10.1016/j.ceramint.2016.05.152 ↗
22. Effect of Al content on microstructure of Ti-Al-Nb-C-Mo composites reinforced with carbide particles
23. Effect of carbon on the room temperature compressive behaviour of Ti-44.5Al-8Nb-0.8Mo-xC alloys prepared by vacuum induction melting
24. Comparative study of microstructure and mechanical properties of two TiAl-based alloys reinforced with carbide particles10.3390/molecules25153423 ↗
25. Effect of microstructural instability on the creep resistance of an advanced intermetallic γ-TiAl based alloy10.1016/j.intermet.2016.09.007 ↗
26. Enhancement of creep properties and microstructural stability of intermetallic β-solidifying γ-TiAl based alloys10.1016/j.intermet.2015.03.017 ↗
27. Annealing studies of γ-titanium aluminides alloyed with light elements for creep strengthening10.1016/S0966-9795(98)00030-2 ↗
28. Elevated temperature deformation properties of in-situ carbide particle strengthened Ti48Al materials10.1016/0966-9795(94)90055-8 ↗
29. Processing, microstructure and mechanical properties of in-situ Ti3Al+TiAl matrix composite reinforced with Ti2AlC particles prepared by centrifugal casting10.1016/j.intermet.2018.04.012 ↗
30. Effects of Nb on microstructure and mechanical properties of Ti42Al2.6C alloys10.1002/adem.201701112 ↗
31. Role of graphite on microstructural evolution and mechanical properties of ternary TiAl alloy prepared by arc melting method10.1016/j.matdes.2018.06.048 ↗
32. Evidence for deformation twinning of the D019-α2 phase in a high Nb containing TiAl alloy10.1016/j.intermet.2019.03.014 ↗
33. General features of high temperature deformation kinetics for γ-TiAl-based alloys with DP/NG microstructures: Part I. A survey of mechanical data and development of unified rate-equations10.1016/j.msea.2016.08.079 ↗
34. Hot deformation behavior and microstructural evolution of as-forged Ti-44Al-8Nb-(W, B, Y) alloy with nearly lamellar microstructure10.1016/j.intermet.2017.02.026 ↗
35. Phase transformation and dynamic recrystallization behavior of a β-solidifying γ-TiAl alloy and its wrought microstructure control10.1016/j.matdes.2015.10.133 ↗
36. Characterization of the high temperature deformation behavior of two intermetallic TiAl-Mo alloys10.1016/j.msea.2015.09.077 ↗
37. Deformation and dynamic recrystallization behavior of a high Nb containing TiAl alloy10.1016/j.jallcom.2012.11.076 ↗
38. Hot deformation behavior and dynamic recrystallization of a β-solidifying TiAl alloy10.1016/j.msea.2015.11.097 ↗
39. On the high temperature deformation of a directionally solidified γ-TiAl alloy10.1016/j.msea.2019.04.072 ↗
40. High temperature compressive flow behavior and associated microstructural development in a β-stabilized high Nb-containing γ-TiAl based alloy10.1016/j.jallcom.2019.02.207 ↗
41. Microstructural characteristics and dynamic recrystallization behavior of β-γ TiAl based alloy during high temperature deformation10.1016/j.intermet.2018.04.002 ↗
42. Dynamic recrystallization behavior of an as-cast TiAl alloy during hot compression10.1016/j.matchar.2014.09.013 ↗
43. Hot deformation behavior and processing maps of B and Gd containing β-solidified TiAl based alloy10.1016/j.intermet.2018.01.004 ↗
44. Vacuum induction melting and solidification of TiAl-based alloy in graphite crucibles10.1016/j.vacuum.2018.05.017 ↗
45. Model selection and stress prediction of Ti-45Al-9Nb alloy during hot deformation
46. Microstructure evolution and dynamic softening behavior of as-forged Ti-43Al-9V-Y-0.2Y alloy under different deformation parameters
47. On the mechanism of hot deformation10.1016/0001-6160(66)90207-0 ↗
48. Effect of anisotropic microstructure on high-temperature compression deformation of CoCrFeNi based complex concentrated alloy
49. Microstructure and deformation of two-phase γ-titanium aluminides10.1016/S0927-796X(97)00018-1 ↗
50. Deformation mechanisms in TiAl intermetallics - experiments and modeling10.1016/S0749-6419(01)00036-5 ↗
51. Appel · 2011
52. Deformation microstructure developed by nanoindentation of a MAX phase Ti2AlC10.2320/matertrans.MBW201703 ↗
53. Dynamic recrystallization of a β(B2)-Stabilized γ-TiAl based Ti–45Al–8Nb–2Cr-0.2B alloy: the contributions of constituent phases and Zener-Hollomon parameter modulated recrystallization mechanisms10.1016/j.jallcom.2020.154386 ↗
54. Comparing the evolution and deformation mechanisms of lamellar and equiaxed microstructures in near β-Ti alloys during hot deformation10.1016/j.msea.2019.05.015 ↗
55. Microstructure evolution, hot deformation behavior and mechanical properties of Ti-43Al-6Nb-1B alloy10.1016/j.intermet.2012.07.016 ↗
56. Microstructural evolution during hot working of Ti aluminide alloys: influence of phase constitution and initial casting texture10.1007/s11661-005-1015-1 ↗
57. Hot deformation and dynamic recrystallization behavior of TiAl-based alloy10.1016/j.intermet.2019.106521 ↗
58. Elevated temperature compressive deformation behaviors of γ-TiAl-based Ti–48Al–2Cr–2Nb alloy additively manufactured by electron beam melting10.1016/j.intermet.2020.106859 ↗
59. Phase transformation and microstructure evolution of differently processed Ti-45Al-9Nb-Y alloy10.1016/j.intermet.2012.07.009 ↗
60. Dynamic recrystallization behavior of the Ti–48Al–2Cr–2Nb alloy during isothermal hot deformation10.1016/j.pnsc.2019.08.004 ↗
61. Characterization of the elevated temperature compressive deformation behavior of high Nb containing TiAl alloys with two microstructures10.1016/j.msea.2018.04.055 ↗
62. Mechanical properties, deformation behavior and microstructure evolution of Ti-43Al-6Nb-1Mo-1Cr alloys10.1016/j.matchar.2017.11.050 ↗
63. Self-diffusion in γ-TiAl: an experimental study and atomistic calculations10.1016/S0966-9795(98)00117-4 ↗
64. Diffusion in the Ti–Al system10.1016/S1359-6454(99)00400-0 ↗
65. Tensile creep of Ti2AlC in air in the temperature range 1000-1150°C10.1016/j.scriptamat.2012.02.015 ↗
66. Deformation inhomogeneity due to sample–anvil friction in cylindrical compression test10.1016/S1003-6326(19)64937-X ↗
67. Evolution of fiber lengths in a short fiber reinforced low volume fraction metal matrix composite during creep10.1016/j.msea.2004.04.059 ↗