TEM analysis of 2205 duplex stainless steel to determine orientation relationship between M23C6 carbide and austenite matrix at 950 °C
Source abstract
Abstract
Abstract Microstructures of 2205 duplex stainless steel were examined using transmission electron microscopy. During isothermal heating at 950 °C, M23C6 carbide was formed on the austenite grain boundaries with two types of morphologies: “larva” and “triangle”. The orientation relationship between the M23C6 carbide and the austenite matrix is cubic-to-cubic. In addition, these two types of precipitates have a twin relationship with each other. Based on the STEM-EDS data, the silicon content of triangle M23C6 carbide is higher than that of the larva M23C6 carbide, revealing that the silicon content in the M23C6 carbide plays an important role in determining the orientation relationship between the M23C6 carbide and the austenite matrix.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Influence of microstructure on the flow behavior of duplex stainless steels at high temperatures10.1007/s11661-000-0254-4 ↗
2. Effect of intermetallic precipitations on the properties of duplex stainless steel10.1016/j.matchar.2006.03.015 ↗
3. Hot deformation characteristics of 2205 duplex stainless steel based on the behavior of constituent phases10.1016/j.matdes.2009.06.028 ↗
4. Preferential precipitation site of sigma phase in duplex stainless steel weld metal10.1016/S1359-6462(98)00483-7 ↗
5. Phase transformation and mechanical behavior in annealed 2205 duplex stainless steel welds10.1016/j.matchar.2007.03.004 ↗
6. Effect of solution treatment temperature on the precipitation kinetic of σ-phase in 2205 duplex stainless steel welds10.1016/j.msea.2008.06.024 ↗
7. Stress corrosion cracking behavior of 2205 duplex stainless steel in concentrated NaCl solution10.1016/S0010-938X(99)00105-5 ↗
8. Effects of sigma phase precipitation on seawater pitting of duplex stainless steel10.1016/j.desal.2006.05.021 ↗
9. The influence of aging on the intergranular corrosion of 22 chromium-5 nickel duplex stainless steel10.1016/0010-938X(94)00120-U ↗
10. Effect of isothermal treatment of SAF 2205 duplex stainless steel on migration of δ/γ interface boundary and growth of austenite10.1016/S0925-8388(99)00014-6 ↗
11. Orientation relationships associated with austenite formation from ferrite in a coarse-grained duplex stainless steel10.1007/s11661-006-0067-1 ↗
12. The microstructure evolution of 2205 stainless steel in long-term aging at 500 °C10.1016/j.nucengdes.2012.05.030 ↗
13. High temperature ageing behaviour of a duplex stainless steel10.1016/j.matchar.2008.04.008 ↗
14. Sigma phase precipitation in duplex stainless steel 220510.1016/j.msea.2006.08.107 ↗
15. Qualitative and quantitative analysis of σ and χ phases in 2205 duplex stainless steel10.1016/j.matchar.2005.11.003 ↗
16. The effect of high-temperature exposure on the microstructural stability and toughness property in a 2205 duplex stainless steel10.1016/S0921-5093(02)00093-X ↗
17. The relationship between chromium nitride and secondary austenite precipitation in duplex stainless steels10.1007/s11661-003-0304-9 ↗
18. Effects of solution treatment and continuous cooling on σ-phase precipitation in a 2205 duplex stainless steel10.1016/S0921-5093(01)00911-X ↗
19. Precipitation of second phases in high-interstital-alloyed austenitic steel10.1007/s11661-011-0924-4 ↗