Determination of the Statistical Power of Fatigue Characteristics in Relation to the Number of Samples
Source abstract
Abstract
The paper presents guidelines included in the ISO 12107:2003 standard regarding the number of samples for determining the fatigue characteristics in the high cycle range. The proposed normative values were compared with the classical statistical approach. Fatigue test results for S355J2+C steel for rotary bending were used for verification. In addition, the error and power of a statistical test were determined for characteristics with different sample sizes. It determined the number of specimens to estimate the fatigue curve, which required significant error and power of the statistical test.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Material Properties and Failure Mechanisms · Fatigue and fracture mechanics · Engineering Diagnostics and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Mechanical Engineering, Bydgoszcz University of Science and Technology, 85-796 Bydgoszcz, Poland
References (41)
Show source-provided references
1. Impact of Cutting Units’ Design on Biomass Cutting Resistance
2. Fatigue Life Analysis of Steel Bicycle Frame According to ISO 421010.1016/j.engfailanal.2020.105195 ↗
3. Safe Life and Damage Tolerance Aspects of Railway Axles—A Review10.1016/j.engfracmech.2012.09.029 ↗
4. Failure Analysis of a Bridge Crane Shaft10.1016/j.csefa.2013.12.002 ↗
5. (2012). Metallic Materials—Fatigue Testing—Statistical Planning and Analysis of Data (Standard No. ISO-12107:2012).
6. (2015). Standard Practice for Statistical Analysis of Linear or Linearized Stress-Life (S-N) and Strain-Life (ε-N) Fatigue Data (Standard No. ASTM E-739-10).
7. The Exponential Law of Endurance Tests
8. Shen, C. (1994). The Statistical Analysis of Fatigue Data. [Ph.D. Thesis, The University of Arizona].
9. Determination of Sample Size for Estimation of Fatigue Life by Using Weibull or Log-Normal Distribution10.1016/S0142-1123(99)00048-1 ↗
10. Estimation of the Minimum Number of Test Specimens for Fatigue Testing of Acrylic Bone Cement10.1016/j.biomaterials.2003.11.014 ↗
11. Statistical Techniques of Sample Size Estimating in Fatigue Tests
12. Backwards Statistical Inference Method for P-S-N Curve Fitting with Small-Sample Experiment Data10.1016/j.ijfatigue.2014.01.006 ↗
13. Determination of the Fatigue P-S-N Curves—A Critical Review and Improved Backward Statistical Inference Method10.1016/j.ijfatigue.2020.105789 ↗
14. Small Sample-Based Fatigue Reliability Analysis Using Non-Intrusive Polynomial Chaos10.1109/ACCESS.2020.2983195 ↗
15. α-S-N Curve: A Novel S-N Curve Modeling Method under Small-Sample Test Data Using Uncertainty Theory10.1016/j.ijfatigue.2020.105725 ↗
16. (2003). Metallic Materials—Fatigue Testing—Statistical Planning and Analysis of Data (Standard No. ISO-12107:2003).
17. Shigeo, S. Academic Frontier Data Sheet on Fatigue Properties of Rail Steel by Alternating Axial Loading Life Test. Personal communication.
18. Górecki, T. (2011). Basic Statistics with Examples in R, Wydawnictwo BTC. (In Polish).
19. Walpole, R.E., Myers, R.H., Myers, S.L., and Ye, K.E. (2012). Probability and Statistics for Engineers and Scientists, Pearson Education, Inc.. [9th ed.].
20. (2011). Railway Applications—Wheelsets and Bogies—Method of Specifying the Structural Requirements of Bogie Frames (Standard No. PN-EN 13749).
21. Scatter Analysis of Fatigue Life and Prediction of S-N Curve10.1007/s11668-012-9590-0 ↗
22. Danielewski, H., Skrzypczyk, A., Hebda, M., Tofil, S., Witkowski, G., Długosz, P., and Nigrovič, R. (2020). Numerical and Metallurgical Analysis of Laser Welded, Sealed Lap Joints of S355j2 and 316l Steels under Different Configurations. Materials, 13.10.3390/ma13245819 ↗
23. (2003). Dimensions and Tolerances of Bright Steel Products (Standard No. PN-EN 10278).
24. Experimental Verification of the Analytical Method for Estimated S-N Curve in Limited Fatigue Life10.4028/www.scientific.net/MSF.726.11 ↗
25. Li, C., Dai, W., Duan, F., Zhang, Y., and He, D. (2017). Fatigue Life Estimation of Medium-Carbon Steel with Different Surface Roughness. Appl. Sci., 7.10.20944/preprints201703.0187.v1 ↗
26. (2010). Metallic Materials—Rotating Bar Bending Fatigue Testing (Standard No. ISO-1143).
27. Dyskin, A.V., and Pasternak, E. (2018, January 3–6). Fatigue Scatter of the Test results Related to Error of Applied Stress. Proceedings of the the 11th International Conference on Structural Integrity and Failure, Perth, Australia.
28. Zawadzki, K. (2015). Experimental Verification of Selected Parameters Determining the Mechanical Properties of Steel. [Master's Thesis, University of Science and Technology in Bydgoszcz].
29. (2016). Metallic Materials—Tensile Testing—Part 1: Method of Test at Room Temperature (Standard No. ISO 6892–1).
30. Mechanical Properties of Explosively Welded AA2519-AA1050-Ti6Al4V Layered Material at Ambient and Cryogenic Conditions10.1016/j.matdes.2017.08.008 ↗
31. (2022, September 13). R-Project.org Package Stats 4. Available online: https://www.rdocumentation.org/packages/stats4/versions/3.6.2.
32. Trzepieciński, T., Kubit, A., Fejkiel, R., Chodoła, Ł., Ficek, D., and Szczęsny, I. (2021). Modelling of Friction Phenomena Existed in Drawbead in Sheet Metal Forming. Materials, 14.10.3390/ma14195887 ↗
33. Design Characteristics of Structural Steels Based on Statistical Analysis of Metallurgical Products10.1016/S0143-974X(03)00144-5 ↗
34. Kucharska, M., Wiewiórowska, S., Michalczyk, J., and Gontarz, A. (2020). The Influence of the Drawing Process on the Mechanical Properties of TRIP Steel Wires with 0.4% C Content. Materials, 13.10.3390/ma13245769 ↗
35. Baumann, M., Selbmann, R., Milbrandt, M., Kräusel, V., and Bergmann, M. (2021). Adjusting the Residual Stress State in Wire Drawing Products via In-Process Modification of Tool Geometries. Materials, 14.10.3390/ma14092157 ↗
36. Hwang, Y.M., Tsui, H.S.R., and Lin, M.R. (2022). Investigations on Effects of Forming Parameters on Product Dimensions in Cold Drawing of AISI-316 Stainless Steel Rods. Metals, 12.10.3390/met12040690 ↗
37. (2018). Bright Steel Products—Technical Delivery Conditions (Standard No. PN-EN 10277).
38. Comparing Guidelines Concerning Construction of the S-N Curve within Limited Fatigue Life Range10.1515/pomr-2015-0058 ↗
39. Base Material Fatigue Data for Low Alloy Forged Steels Used in the Subsea Industry. Part 1: In Air S–N Data10.1016/j.ijfatigue.2015.07.007 ↗
40. Hobbacher, A.F. (2008). Recommendations for Fatigue Design of Welded Joints and Components, Springer. IIW Document IIW-1823-07, International Institute of Welding.
41. Strzelecki, P., Mazurkiewicz, A., Musiał, J., Tomaszewski, T., and Słomion, M. (2019). Fatigue Life for Different Stress Concentration Factors for Stainless Steel 1.4301. Materials, 12.10.3390/ma12223677 ↗