Characterization of the Fracture Network and Its Spatial Variability in Complex Faulted Zones: Implication in Landslide Susceptibility Analysis
Source abstract
Abstract
In the frame of a regional study that is aimed at defining the landslide susceptibility in the upper Susa Valley (Western Italian Alps), this paper investigated the variation in the fracture network of rock masses in correspondence to faults zones. Fracture networks were characterized at sites located along transects that are oriented normally to fault traces and scattered in their adjacent sectors with the scope to be able to define and estimate the variation in fracture abundance in the bedrock. Fracture collection using a traditional geomechanical survey was combined with topological analysis to estimate the degree of fracturing of rock masses in terms of fracture intensity (P21) and connectivity. Several sites were selected, and the variation in fracturing intensity values and degree of connectivity allowed for the defining of “high fracturing zones” (HFZ) near fault traces moving from the background values of adjacent rock masses. Considering the variation in fracture intensity, a range of 400 m to 150 m HFZ can be defined, with considerable differences between the areas analysed. The values recorded show a high irregular variability in fracture intensity in correspondence to the mapped faults due to the interference and overlay of structures related to the complexity setting of the fault damage zone.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Landslides and related hazards · Rock Mechanics and Modeling · earthquake and tectonic studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Earth Science, University of Torino, 10125 Turin, Italy
Institute of Geosciences and Earth Resources, National Research Council (CNR), 10125 Turin, Italy
References (66)
Show source-provided references
1. Adler, P.M., and Thovert, J.F. (1999). Fractures and Fracture Networks, Springer Science & Business Media.10.1007/978-94-017-1599-7 ↗
2. Hydromechanical behavior of fractured rocks10.1016/S0074-6142(03)80023-2 ↗
3. A review of recent developments concerning the structure, mechanics and fluid flow properties of fault zones10.1016/j.jsg.2010.06.009 ↗
4. Prediction of macrofracture properties using microfracture information, Mesaverde Group sandstones, San Juan basin, New Mexico10.1016/S0191-8141(99)00186-8 ↗
5. A conceptual model for the origin of fault damage zone structures in high-porosity sandstone10.1016/S0191-8141(02)00037-8 ↗
6. Spatial distribution of brittle strain in layered sequences10.1016/j.jsg.2007.10.005 ↗
7. The nature and origin of off-fault damage surrounding strike-slip fault zones with a wide range of displacements: A field study from the Atacama fault system, northern Chile10.1016/j.jsg.2009.05.002 ↗
8. Collateral damage: Evolution with displacement of fracture distribution and secondary fault strands in fault damage zones10.1029/2010JB007665 ↗
9. Spatial distribution of deformation bands in damage zones of extensional faults in porous sandstones: Statistical analysis of field data10.1016/j.jsg.2013.03.013 ↗
10. Implications of heterogeneous fracture distribution on reservoir quality; an analogue from the Torridon Group sandstone, Moine Thrust Belt, NW Scotland10.1016/j.jsg.2017.06.002 ↗
11. Fault core thickness: Insights from siliciclastic and carbonate rocks10.1155/2019/2918673 ↗
12. Morphology and topology of dolostonelithons in the regional Carboneras Fault Zone, Southern Spain10.1016/j.jsg.2020.104073 ↗
13. The growth of faults and fracture networks in a mechanically evolving, mechanically stratified rock mass: A case study from Spireslack Surface Coal Mine, Scotland10.5194/se-11-2119-2020 ↗
14. Chang, Z., Du, Z., Zhang, F., Huang, F., Chen, J., Li, W., and Guo, Z. (2020). Landslide susceptibility prediction based on remote sensing images and GIS: Comparisons of supervised and unsupervised machine learning models. Remote Sens., 12.10.3390/rs12030502 ↗
15. Influence of hole diameter on mechanical properties and stability of granite rock surrounding tunnels10.1063/5.0154872 ↗
16. Stress evolution of deep surrounding rock under characteristics of bi-modulus and strength drop10.1007/s11771-022-4945-5 ↗
17. Damage zone geometry around fault tips10.1016/0191-8141(94)00116-H ↗
18. Propagation, interaction and linkage in normal fault systems10.1016/S0012-8252(01)00085-X ↗
19. Initiation of brittle faults in the upper crust: A review of field observations10.1016/j.jsg.2003.07.007 ↗
20. Mesoscale strike-slip faults and damage zones at Marsalforn, Gozo Island, Malta10.1016/S0191-8141(02)00200-6 ↗
21. Fault damage zones10.1016/j.jsg.2003.08.002 ↗
22. Structural similarity and variety at the tips in a wide range of strike–slip faults: A review10.1111/j.1365-3121.2006.00697.x ↗
23. Definition and classification of fault damage zones: A review and a new methodological approach10.1016/j.earscirev.2015.11.006 ↗
24. Fault linkage and relay structures in extensional settings—A review10.1016/j.earscirev.2015.11.014 ↗
25. Glossary of fault and other fracture networks10.1016/j.jsg.2016.09.008 ↗
26. A broader classification of damage zones10.1016/j.jsg.2017.08.004 ↗
27. Umili, G., Bonetto, S.M.R., Mosca, P., Vagnon, F., and Ferrero, A.M. (2020). In situ block size distribution aimed at the choice of the design block for rockfall barriers design: A case study along gardesana road. Geosciences, 10.10.3390/geosciences10060223 ↗
28. Lineament mapping and its application in landslide hazard assessment: A review10.1007/s10064-009-0255-5 ↗
29. New application of open source data and Rock Engineering System for debris flow susceptibility analysis10.1007/s11629-021-6814-3 ↗
30. Debris flow susceptibility mapping using the Rock Engineering System (RES) method: A case study10.1007/s10346-022-01985-6 ↗
31. Hudson, J.A. (1992). Rock Engineering Systems. Theory and Practice, Ellis Horwood.
32. Servizio Geologico D’Italia (1998). Carta Geologica d’Italia alla Scala 1:50.0000, F. 152-153 Bardonecchia, ISPRA.
33. Servizio Geologico D’Italia (2020). Carta Geologica d’Italia alla Scala 1:50.0000, F. 171 Cesana Torinese, ISPRA.
34. Geological outline of the Alps
35. Interlayer and Si content of phengite in HP–LT carpholite-bearing metapelites10.1046/j.0263-4929.2001.00322.x ↗
36. To be or not to be Alpine: New petrological constraints on the metamorphism of the Chenaillet Ophiolite (Western Alps)10.1111/jmg.12716 ↗
37. Geological setting of the Lyon-Turin cross-border section (Italian side)
38. L’unità piemontese Chaberton-GrandHoche (Val Susa-Alpi Occidentali): Evoluzione litostratigrafica, assetto strutturale e rapporti con i complexi circostanti
39. NetworkGT: A GIS tool for geometric and topological analysis of two-dimensional fracture networks10.1130/GES01595.1 ↗
40. The use of topology in fracture network characterization10.1016/j.jsg.2015.01.005 ↗
41. Characterizing rock joint geometry with joint system models10.1007/BF01019674 ↗
42. Dershowitz, W.S., and Herda, H.H. (1992, January 3–5). Interpretation of fracture spacing and intensity. Proceedings of the ARMA US Rock Mechanics/Geomechanics Symposium, Santa Fe, Mexico.
43. Circular scanlines and circular windows: New tools for characterizing the geometry of fracture traces10.1016/S0191-8141(00)00094-8 ↗
44. Estimating fracture trace intensity, density, and mean length using circular scan lines and windows
45. Defining the degree of fracturing in fault zones: Implications in the study of landslide susceptibility
46. Effects of texture and composition on mechanical behavior of experimentally deformed carbonate rocks
47. Fracture development and mechanical stratigraphy of Austin Chalk, Texas
48. Lithologic and structural controls on natural fracture distribution and behavior within the Lisburne Group, northeastern Brooks Range and North Slope subsurface, Alaska
49. Fault zone deformation controlled by carbonate mechanical stratigraphy, Balcones fault system, Texas10.1306/10290707066 ↗
50. Sedimentary and diagenetic controls on the multiscale fracturing pattern of a carbonate reservoir: The Madison Formation (Sheep Mountain, Wyoming, USA)10.1016/j.marpetgeo.2011.08.009 ↗
51. Quantifying diagenetic and stratigraphic controls on fracture intensity in platform carbonates: An example from the Sierra Madre Oriental, northeast Mexico10.1016/j.jsg.2010.07.004 ↗
52. Mechanics of discontinuous faults10.1029/JB085iB08p04337 ↗
53. Fault tip displacement gradients and process zone dimensions10.1016/S0191-8141(98)00029-7 ↗
54. Glossary of normal faults10.1016/S0191-8141(00)80102-9 ↗
55. Relationships between fractures10.1016/j.jsg.2017.11.010 ↗
56. Growth, linkage, and termination processes of a 10-km-long strike-slip fault in jointed granite: The Gemini fault zone, Sierra Nevada, California10.1016/S0191-8141(02)00027-5 ↗
57. Fault linkage and graben stepovers in the Canyonlands (Utah) and the North Sea Viking Graben, with implications for hydrocarbon migration and accumulation10.1306/10130909088 ↗
58. Effects of internal structure and local stresses on fracture propagation, deflection, and arrest in fault zones10.1016/j.jsg.2009.08.013 ↗
59. Scholz, C.H. (2019). The Mechanics of Earthquakes and Faulting, Cambridge University Press.10.1017/9781316681473 ↗
60. The formation of tension joints in sedimentary rocks: An explanation10.1017/S0016756800050226 ↗
61. Small-scale fracture density in Asmari Formation of southwest Iran and its relation to bed thickness and structural setting
62. Quantitative evaluation of fractures on Monkshood anticline, a detachment fold in the foothills of western Canada
63. A new conceptual fold-fracture model including prefolding joints, based on the Emigrant Gap anticline, Wyoming10.1130/B25225.1 ↗
64. The characteristics of fracture networks in the Shiranish formation of the Bina Bawi Anticline; comparison with the TaqTaq field, zagros, Kurdistan, NE Iraq10.1144/petgeo2012-036 ↗
65. Spatial and layer-controlled variability in fracture networks10.1016/j.jsg.2017.07.008 ↗
66. Extensional fracture network attribute distribution in faulted thick sandstone strata: Compione Fault, Northern Apennines, Italy10.1016/j.jsg.2019.103954 ↗