The oxidation resistance of submicron-grained NiAl–Al2O3 composite fabricated by pulse current auxiliary sintering
Source abstract
Abstract
Abstract Dense and submicron-grained NiAl–Al2O3 composite was fabricated by mechanical alloying and subsequent pulse current auxiliary sintering (PCAS). The isothermal and cyclic oxidations were carried out at 900–1100 °C with intervals of 100 °C in order to investigate its oxidation resistance. The results indicate that submicron-grained NiAl–Al2O3 exhibits excellent oxidation resistance. A dense and continuous α-Al2O3 scale is formed after oxidation. The grain refinement is found to be beneficial for the improvement of oxidation resistance, because it can promote the selective oxidation of Al, provide more nucleation points and improve the adhesion of the α-Al2O3 scale. Moreover, a model of leading edge was fabricated by sinter-forging technology with short process in the PCAS furnace to evaluate the practical application of submicron-grained NiAl–Al2O3. Its oxidation resistance was tested by cyclic oxidation at 1100 °C. The result reveals that the NiAl–Al2O3 leading edge exhibits favorable oxidation resistance, which is consistent with the results of the test specimens.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Intermetallics and Advanced Alloy Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Mechanical properties of NiAl–AlN–Al2O3 composites10.1016/S0921-5093(97)00618-7 ↗
2. High temperature oxidation of an oxide-dispersion strengthened NiAl10.1016/S0966-9795(99)00061-8 ↗
3. Secondary recrystallization and high temperature compressive properties of ODS MA NiAl10.1016/S1359-6462(02)00161-6 ↗
4. High temperature deformation of NiAl matrix composites10.1016/S1359-6454(99)00146-9 ↗
5. The oxidation behavior of oxide-dispersed β-NiAl-I. Short-term performance at 1200°C10.1023/A:1018894711276 ↗
6. The effect of various oxide dispersions on the phase composition and morphology of Al203 scales grown on β-NiAl10.1007/BF01682369 ↗
7. Effect of Hf and Y alloy additions on aluminide coating performance10.1016/j.surfcoat.2010.03.040 ↗
8. Improvement of cyclic oxidation resistance of a NiAl-based alloy modified by Dy10.1016/j.surfcoat.2006.03.033 ↗
9. The effect of Y and Zr on the Oxidation of NiAl10.1002/maco.19960471107 ↗
10. Oxidation of a novel electrodeposited Ni–Al nanocomposite film at 1050°C10.1016/j.scriptamat.2004.03.014 ↗
11. Effect of microcrystallization on the cyclic oxidation behavior of β-NiAl intermetallics at 1000°C in air10.1016/S0966-9795(01)00059-0 ↗
12. Oxidation behaviour of sputter-deposited Ni–Cr–Al micro-crystalline coatings10.1016/S1359-6454(97)00346-7 ↗
13. Tensile behaviors of fine-grained γ-TiAl based alloys synthesized by pulse current auxiliary sintering10.1016/j.msea.2009.05.011 ↗
14. The oxidation behaviour of NiAl-I. Phase transformations in the alumina scale during oxidation of NiAl and NiAl–Cr alloys10.1016/0010-938X(92)90002-K ↗
15. Effect of the θ–α-Al2O3 transformation on the oxidation behavior of β-NiAl+Zr10.1007/BF00846690 ↗
16. 18O/SIMS characterization of the growth mechanism of doped and undoped α-Al2O310.1007/BF00665610 ↗
17. Diffusion fluxes and creep of polycrystalline compounds: application to alumina10.1016/0956-716X(93)90455-2 ↗
18. The oxidation of nanocrystalline Ni3Al fabricated by mechanical alloying and spark plasma sintering10.1016/j.intermet.2007.07.003 ↗
19. Cao · 2007
20. The oxidation mechanism of θ-Al2O3 scales10.1016/0167-2738(95)00013-V ↗
21. Transient oxidation of NiAl10.1016/S1359-6454(97)00378-9 ↗
22. The thermal expansion of grain boundaries10.1016/0001-6160(87)90038-1 ↗