Examination of the Effect of Cooling Rate after Extrusion to Formability of 6061 Automotive Profiles
Source abstract
Abstract
As part of the present project, an inquiry is being conducted into the impact of the cooling rate subsequent to extrusion on both the mechanical characteristics and microstructure of 6061 alloy extruded profiles tailored for application in the automotive industry. Water quenching, air cooling, and step-cooling (combination of air cooling and water quenching) were performed after a solution heat treatment for simulating different cooling processes on the exit of the extrusion press. Microstructure examination was performed after artificial aging for every cooling method accompanied by three-point bending and tensile testing for investigation of differences in formability characteristics in each one of the three cases. Electron fractography, texture, and grain boundary misorientation analysis consisted the main analytical techniques, allowing the correlation between grains orientation resulting from the extrusion process with cracking initiation behavior in mechanical testing and for the determination of the regions which were more prone to cracking. From the examination, the positive role of rapid cooling for improved formability was highlighted. Through the grain boundary misorientation analysis and the formation of Taylor factor maps, it was shown that crack initiation preferably took place at subsurface regions even though “roughening” of the bent surface was obvious and expected to lead to crack initiation in the more ductile samples. Considerable amounts of LAGBs (Low Angle Grain Boundaries) (14.7%) and SGBs (Subgrain Boundaries) (4.5%) were detected in the sample which was subjected to step cooling accompanied by an outer and inner surface layers (surface zone) of 200–250 μm thicknesses exhibiting different orientations. The results of this project will be used for optimization of the automotive extruded profiles production process, ensuring improved mechanical performance and resistance to premature fracture.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
ELKEME Hellenic Research Centre for Metals S.A., 61st km Athens–Lamia National Road, 32011 Oinofyta, Greece
ETEM-GESTAMP Extrusion Company, Bul. “Iliyantsi” 119, 1220 Sofia, Bulgaria
References (31)
Show source-provided references
1. Bajor, T., Kawałek, A., Berski, S., Jurczak, H., and Borowski, J. (2022). Analysis of the Extrusion Process of Aluminium Alloy Profiles. Materials, 15.10.3390/ma15238311 ↗
2. Shen, X., Liu, S., Wang, X., Cui, C., Gong, P., Zhao, L., Han, X., and Li, Z. (2022). Effect of Cooling Rate on the Microstructure Evolution and Mechanical Properties of Iron-Rich Al–Si Alloy. Materials, 15.10.3390/ma15020411 ↗
3. Xu, Z., Wang, S., Wang, H., Song, H., Li, S., and Chen, X. (2020). Effect of Cooling Rate on Microstructure and Properties of Twin-Roll Casting 6061 Aluminum Alloy Sheet. Metals, 10.10.3390/met10091168 ↗
4. Investigation on the deformation behavior and post-formed microstructure/properties of AA7075-T6 alloy under pre-hardened hot forming process10.1016/j.msea.2020.139749 ↗
5. Improvement of the mechanical properties of Al–Mg–Si alloys with nano-scale precipitates after repetitive continuous extrusion forming and T8 tempering10.1016/j.jmrt.2019.09.070 ↗
6. Optimization of heat treatment in cold-drawn 6063 aluminium tubes10.1016/j.jmatprotec.2009.01.027 ↗
7. Zupanič, F., Steinacher, M., Žist, S., and Bončina, T. (2021). Microstructure and Properties of a Novel Al-Mg-Si Alloy AA 6086. Metals, 11.10.3390/met11020368 ↗
8. Mao, H., Bai, X., Song, F., Song, Y., Jia, Z., Xu, H., and Wang, Y. (2022). Effect of Cd on Mechanical Properties of Al-Si-Cu-Mg Alloys under Different Multi-Stage Solution Heat Treatment. Materials, 15.10.3390/ma15155101 ↗
9. Effect of ageing and thermal exposure on microstructure and mechanical properties of a HPDC Al–Si–Cu–Mg alloy10.1016/j.msea.2022.143463 ↗
10. The Effect of Cooling Rate on Microstructure and Mechanical Properties of Al-Mg-Si (6063) Alloy
11. Ye, Y., Sanders, R., and Yang, X. (2018, January 17–21). The Influence of Microstructure on the Fracture Resistance of 6xxx Alloy Sheet. Proceedings of the 16th International Aluminum Alloys Conference (ICAA16), Montreal, QC, Canada.
12. Westermann, I., Snilsberg, K., Holmedal, B., and Hopperstad, O. (2010, January 5–9). Bendability and Fracture Behaviour of Heat-Treatable Extruded Aluminium Alloys. Proceedings of the 12th International Conference on Aluminium Alloys, ICAA12, Yokohama, Japan.
13. Vazdirvanidis, A., Pressas, I., Papadopoulou, S., Toulfatzis, A., Rikos, A., Katsivarda, M., Symeonidis, G., and Pantazopoulos, G. (2019). Examination of formability properties of 6063 alloy extruded profiles for the automotive industry. Materials, 12.10.3390/met9101080 ↗
14. The influence of second phase particles on texture during rolling of Al 3104
15. Prediction of in-plane anisotropy of bendability based on orientation distribution function for polycrystalline face-centered cubic metal sheets with various textures10.2320/matertrans.ME201405 ↗
16. Microstructure and fracture toughness of as-cast and heat-treated Al-Mg-Si alloys
17. The effect of Cu addition on the mechanical properties of Al-Mg-Si alloy
18. Effect of aging on microstructure and fracture toughness of Al-Mg-Si-Cu alloys
19. Investigation of the effect of homogenization practice of 6063 alloy billets on beta to alpha transformation and of the effect of cooling rate on precipitation kinetics10.4028/www.scientific.net/MSF.941.884 ↗
20. Papadopoulou, S., Loukadakis, V., Zacharopoulos, Z., and Papaefthymiou, S. (2021). Influence of uniaxial deformation on texture evolution and anisotropy of 3104 Al sheet with different initial microstructure. Metals, 11.10.3390/met11111729 ↗
21. Papadopoulou, S., Kontopoulou, A., Gavalas, E., and Papaefthymiou, S. (2020). The Effects of Reduction and Thermal Treatment on the Recrystallization and Crystallographic Texture Evolution of 5182 Aluminum Alloy. Metals, 10.10.3390/met10101380 ↗
22. Vazdirvanidis, A., Skordilis, I., Katsivarda, M., Stavroulakis, P., and Papaefthymiou, S. (2017, January 13–16). Study of Grain structure and crystallographic orientation of extruded 6xxx series alloy profiles. Proceedings of the 14th International Scientific Congress Machines, Technologies, Materials (MTM 2017), Varna, Bulgaria.
23. A micromechanics study on strain-localization-induced fracture initiation in bending using crystal plasticity models10.1080/01418610108216649 ↗
24. Microstructural and Mechanical Characterization of the Aging Response of Wrought 6156 (Al-Mg-Si) Aluminum Alloy10.3390/alloys1020011 ↗
25. Vazdirvanidis, A., Koumarioti, A., Pantazopoulos, G., Rikos, A., Toulfatzis, A., Kostazos, P., and Manolakos, D. (2012, January 3–7). Examination of Buckling Behavior of Thin-Walled Al-Mg-Si Alloy Extrusions. Proceedings of the 12th International Conference on Aluminium Alloys, Pittsburgh, PA, USA.10.1007/978-3-319-48761-8_136 ↗
26. Papadopoulou, S., Gavalas, E., and Papaefthymiou, S. (2021). Methodology for the Identification of Nucleation Sites in Aluminum Alloy by Use of Misorientatation Mapping. Mater. Proc., 3.10.3390/IEC2M-09251 ↗
27. Koumarioti, I., Ping, S., Vazdirvanidis, A., Pantazopoulos, G., and Zormalia, S. (2010, January 5–9). Influence of Homogenizing and Ageing Practices on Microstructure and Dynamic Compression of Crash Relevant Al-Alloy Extrusions. Proceedings of the 12th International Conference on Aluminium Alloys, Yokohama, Japan.
28. Three-Point Bending of Heat-Treatable Aluminum Alloys: Influence of Microstructure and Texture on Bendability and Fracture Behavior10.1007/s11661-011-0768-y ↗
29. Martin, O. (2018). Light Metals, Springer. TMS.10.1007/978-3-319-72284-9 ↗
30. Lloyd, D. (2018, January 17–21). Aspects of plasticity and fracture under bending in Al alloys. Proceedings of the 16th International Aluminum Alloys Conference (ICAA16), Montreal, QC, Canada.
31. 6061 Aluminum Composition Spec (2023, January 14). The Aluminum Association. Available online: https://www.aluminum.org/sites/default/files/Aluminum-Standards-Data-2017_0.pdf.