Microstructural evolution and mechanical properties of a β-solidifying γ-TiAl alloy densified by spark plasma sintering

Abstract This study deals with the densification of a pre-alloyed Ti–44Al–6Nb–1Mo–0.2Y–0.1B (at.%) powder by spark plasma sintering (SPS). The powder was produced by a plasma rotating electrode process (PREP), and then SPS densified at temperatures between 1200 and 1320 °C. At SPS temperatures below 1240 °C, the α2-dominated dendritic structure in the PREP powder particles disappeared and the fully dense microstructure mainly consisting of γ and B2 grains formed during SPS, but several original powder particle boundaries (OPBs) still remained. While sintered above 1240 °C, OPBs vanished entirely and an uniform duplex microstructure emerged. Furthermore, fully-lamellar (FL) microstructure with mean colony size smaller than 20 μm was produced via β-homogenization annealing. This FL microstructure renders a good tensile elongation of 1.25% and yield strength of 665 MPa at room temperature. However, instability of α2/γ lamellar structures was induced by final stabilization annealing, resulting in sharp reduction of both room-temperature ductility and high-temperature strength.