Research on the Mechanism of the Passive Reinforcement of Structural Surface Shear Strength by Bolts under Structural Surface Dislocation
Source abstract
Abstract
In order to study the local deformation of an anchor bolt and the improvement in the shear strength of a structural surface under the misalignment of an anchorage structure surface, FLAC3D software was used to simulate granite, sandstone, and coal specimens with anchorage angles of 90° to analyze the damage of the anchoring agent and the changes in the local axial and shear forces of the anchor bolts with the misalignment of the structural surface. The results show that the anchor bolt near the structural surface had significant local characteristics with the misalignment of the structural surface; that is, the length of the local deformation area of the bolt was approximately equal to the length of the damaged area of the anchoring agent, and the stress on the anchor bolt was in a coupled tensile–shear stress state when the bolt reached the yield state. For the fully grouted bolts, it was this significant local feature that made the shear strength of the structural surface increase rapidly under a small shear displacement so that the structural surface reached a stable state. The improvement in the shear strength of the anchoring structural surface was caused by the misalignment of the structural surface. This is referred to as the passive improvement of the shear strength of the anchoring structural surface, which is the mechanism of the bonding section anchor to control the shear displacement of the structural surface and realize the stability of the rock mass.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Rock Mechanics and Modeling · Geotechnical Engineering and Underground Structures · Tunneling and Rock Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Shandong University of Science and Technology, Qingdao 266590, China
School of Architectural Environment, Ningxia Institute of Science and Technology, Shizuishan 753000, China
State Key Laboratory of Mining Disaster Prevention and Control Co-Founded by Shandong Province and the Ministry of Science and Technology, Shandong University of Science and Technology, Qingdao 266590, China
School of Engineering, Nagasaki University, Nagasaki 852-8521, Japan
Funding
Natural Science Foundation of Shandong Province for Young Scholars · National Natural Science Foundation of China
References (28)
Show source-provided references
1. Bjurstrom, S. (1974, January 1). Shear strength of hard rock joints reinforced by grouted untensioned bolts. Proceedings of the 3rd Congress of the International Society for Rock Mechanics, Denver, CO, USA.
2. Study of the shear resistance behaviour of bolted rock joints
3. Synthetical deformation analysis of anchor bolt in jointed rock mass
4. Mechanism analysis of shear deformation of joint bolt based on elastic plastic theory
5. An analytical model of jointed rock bolts under the combination of tensile and shear loads
6. Advance and review on the anchoring mechanism in deep fractured rock mass
7. Research progress in bolting mechanism and theories of fully grouted bolts in jointed rock masses
8. Theoretical analysis on shear resistance of bolt under shear loading
9. An analytical model for shear behaviour of bolted rock joints10.1016/j.ijrmms.2019.04.005 ↗
10. Experimental study on the effect of locking mode on shear characteristics of bolted rock joint
11. Effect of fully grouted passive bolts on joint shear strength parameters in a blocky mass10.1007/s00603-014-0615-8 ↗
12. Behaviour of rock joint reinforced by energy-absorbing rock bolt under cyclic shear loading condition10.1016/j.ijrmms.2018.07.021 ↗
13. Shear performance of rock joint reinforced by fully encapsulated rock bolt under cyclic loading condition10.1007/s00603-018-1698-4 ↗
14. Experimental study on shear characteristics of bolted rock joints under constant normal stiffness boundary conditions
15. Numerical modelling of the performance of bolted rough joint subjected to shear load10.1007/s40948-022-00447-6 ↗
16. Experimental investigation on the shear behavior of the bolt-grout interface under CNL and CNS conditions considering realistic bolt profiles10.1007/s40948-022-00416-z ↗
17. Wang, C.S., Liu, R.C., Jiang, Y.J., Wang, G., and Luan, H.J. (2022). Effect of shear-induced contact area and aperture variations on nonlinear flow behaviors in fractal rock fractures. J. Rock Mech. Geotech. Eng.10.1016/j.jrmge.2022.04.014 ↗
18. Implementation of shear broken failure of bolts in FLAC3D and its application
19. Numerical implementation and application of anchor bolt shear fracture in FLAC3D
20. Implementation and application of tension-shear fracture of anchor bolts in FLAC3D
21. Numerical investigation of the shear behaviour of a cable bolt in single shear test10.1016/j.tust.2018.11.016 ↗
22. Analysis of shear resisting action of full-length anchored bolt with pre-stress
23. Parametric study of Rockbolt Shear Behaviour by Double Shear Test10.1007/s00603-016-1063-4 ↗
24. Study on shear properties and failure characteristics of bolted joint of roadway surrounding rock
25. Three-dimensional tunnel face extrusion and reinforcement effects of underground excavations in deep rock masses10.1016/j.ijrmms.2021.104999 ↗
26. The arrangement of double entry driving with a narrow coal pillar in the middle and the stability control technology of surrounding rock
27. Experimental study and mechanism analysis of influence of bolt anchoring on shear properties of jointed rock mass
28. Wang, S.R., Yang, J.H., and Ling, X.Y. (2021). Anchorage Mechanics Effect and Test Technique of Anchor Cable and Anchor Rod (Steel Bar), Tsinghua University Press.