Porous Ti-based bulk metallic glass with excellent mechanical properties and good biocompatibility
Source abstract
Abstract
Abstract Porous Ni- and Be-free Ti-based (Ti45Zr10Cu31Pd10Sn4) bulk metallic glass (BMG) with a diameter exceeding 15 mm was developed by spark plasma sintering (SPS) the mixture of gas-atomized Ti-based glassy alloy powder and solid salt (NaCl) powder, followed by leaching treatment to eliminate the salt phase. The thermal and structural stability, microstructure, mechanical properties, corrosion behavior, and biocompatibility of the developed porous Ti-based BMG samples were investigated systematically. The developed porous Ti-based BMG alloy exhibited three times higher yield strength than that of the natural bone, simultaneously matched the Young's modulus of natural bone, and demonstrated high corrosion resistance and excellent biocompatibility. These results suggest that porous Ti-based BMGs produced by the SPS process open an advanced alternative for clinical applications under load-bearing conditions such as surgical implants.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Titanium alloys in total joint replacement – a materials science perspective10.1016/S0142-9612(97)00146-4 ↗
2. Recent metallic materials for biomedical applications10.1007/s11661-002-0109-2 ↗
3. Ti based biomaterials, the ultimate choice for orthopaedic implants – a review10.1016/j.pmatsci.2008.06.004 ↗
4. Recent progress in Ti-based metallic glasses for application as biomaterials10.2320/matertrans.MF201315 ↗
5. Bulk glass-forming metallic alloys: science and technology10.1557/S0883769400053252 ↗
6. Stabilization of metallic supercooled liquid and bulk amorphous alloys10.1016/S1359-6454(99)00300-6 ↗
7. Recent development and application products of bulk glassy alloys10.1016/j.actamat.2010.11.027 ↗
8. High strength bulk amorphous alloys with low critical cooling rates10.2320/matertrans1989.36.866 ↗
9. A new Ti-based bulk glassy alloy with potential for biomedical application10.1016/j.msea.2007.01.044 ↗
10. Corrosion behavior of a Ti-based bulk metallic glass and its crystalline alloys10.2320/matertrans.MJ200713 ↗
11. Fabrication of Ni-free Ti-based bulk metallic glassy alloy having potential for application as biomaterial, and investigation of its mechanical properties, corrosion, and crystallization behavior10.1557/jmr.2007.0154 ↗
12. Effect of minor Sn additions on the formation and properties of TiCuZrPd bulk glassy alloy10.2320/matertrans.M2011281 ↗
13. Ni-free Ti-based bulk metallic glass with potential for biomedical applications produced by spark plasma sintering10.1016/j.intermet.2012.05.006 ↗
14. Corrosion behavior of porous Ni-free Ti-based bulk metallic glass produced by spark plasma sintering in Hanks' solution10.1016/j.intermet.2013.08.013 ↗
15. In vivo evaluation of a Ti-based bulk metallic glass alloy bar10.3233/BME-151546 ↗
16. Amorphous metallic foam10.1063/1.1537514 ↗
17. Fabrication, thermal stability and mechanical properties of porous bulk glassy Pd-Cu-Ni-P alloys10.2320/matertrans.44.2228 ↗
18. Enhancement of room-temperature plasticity in a bulk metallic glass by finely dispersed porosity10.1063/1.1953884 ↗
19. Formation and mechanical properties of porous Pd-Pt-Cu-P bulk glassy alloys10.2320/matertrans.46.2777 ↗
20. Syntactic bulk metallic glass foam10.1063/1.1646467 ↗
21. Processing and structure of open-celled amorphous metal foams10.1016/j.scriptamat.2004.10.002 ↗
22. Fabrication of porous Zr-Cu-Al-Ni bulk metallic glass by spark plasma sintering process10.1016/j.scriptamat.2006.06.034 ↗
23. Microstructure and mechanical properties of porous Zr55Cu30Al10Ni5 bulk metallic glass fabricated by spark plasma sintering process10.2320/matertrans.MJ200714 ↗
24. Nearly full density Ni52.5Nb10Zr15Ti15Pt7.5 bulk metallic glass obtained by spark plasma sintering of gas atomized powders10.1063/1.2748102 ↗
25. Behavior of oxide film at the interface between particles in sintered Al powders by pulse electric-current sintering10.1007/s11661-003-0104-2 ↗
26. Compression behavior of porous NiTi shape memory alloy10.1016/j.actamat.2004.09.029 ↗
27. Validation of corrosion rates measured by the Tafel extrapolation method10.1016/j.corsci.2005.05.046 ↗
28. Investigating accuracy of the Tafel extrapolation method in HCl solutions10.1016/j.corsci.2009.03.001 ↗
29. Glass forming ability of bulk and mechanically alloyed Zr55Cu19Ni8Al8Si5Ti5 amorphous alloys
30. Processing of bulk metallic glass10.1002/adma.200902776 ↗
31. Spark plasma sintering as advanced PM sintering method10.1179/003258902225007041 ↗
32. Spark plasma sintering: a useful technique to develop large-sized bulk metallic glasses10.4172/2168-9806.1000e109 ↗
33. Field-assisted sintering technology/spark plasma sintering: mechanisms, materials, and technology developments10.1002/adem.201300409 ↗
34. Investigation on hot deformation behavior of nanoscale TiC-strengthened Cu alloys fabricated by mechanical milling10.1016/j.msea.2016.05.042 ↗
35. Development of high performance MgFe alloy as potential biodegradable materials10.1016/j.msea.2016.06.051 ↗
36. Microstructure and mechanical behavior of metallic glass fiber-reinforced Al alloy matrix composites10.1038/srep24384 ↗
37. Microstructure and mechanical properties of crystalline particulates dispersed Ni-based metallic glassy composites fabricated by spark plasma sintering10.1016/j.intermet.2009.12.023 ↗
38. Densification mechanism of Ti-based metallic glass powders during spark plasma sintering process10.1016/j.intermet.2015.06.010 ↗
39. Viscous flow during spark plasma sintering of Ti-based metallic glassy powders10.1016/j.jallcom.2012.12.129 ↗
40. Temperature influence on sintering with concurrent crystallization behavior in Ti-based metallic glassy powders10.1016/j.msea.2009.12.052 ↗
41. Development of large-size ceramic/metal bulk FGM fabricated by spark plasma sintering10.4028/www.scientific.net/MSF.308-311.83 ↗
42. Metallic implant biomaterials10.1016/j.mser.2014.10.001 ↗
43. On the mechanisms of biocompatibility10.1016/j.biomaterials.2008.04.023 ↗
44. New developments of Ti-based alloys for biomedical applications10.3390/ma7031709 ↗
45. Mechanical properties of porous titanium compacts prepared by powder sintering10.1016/j.scriptamat.2003.08.018 ↗
46. Mechanical properties and osteoconductivity of porous bioactive titanium10.1016/j.biomaterials.2005.03.019 ↗
47. Aging of bone tissue: mechanical properties10.2106/00004623-197658010-00015 ↗
48. Fabrication and corrosion property of novel Ti-based bulk glassy alloys without Ni10.2320/matertrans.48.515 ↗
49. Stress corrosion cracking and bioactivity of Ti-based bulk metallic glass10.1016/j.jallcom.2013.11.153 ↗
50. Enhanced mechanical properties, corrosion behavior and bioactivity of Ti-based bulk metallic glasses with minor addition elements10.1007/s40195-016-0468-0 ↗